When the `statistics::nozero` flag is set gem5 does not output that stat
if its value is zero. This was not the case for SimStats which output in
this case. This patch correct this behavior.
This will just call the _m5.range.isSubset method
Change-Id: If747819a008a8ed20796b4efd42a42e5c3a8d7d9
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
This is a followed up fix to #791 mem-ruby: Fix possible dirty line loss
in CHI when ReadShared hit on UD line.
UD_RU line may have stale data since the upstream could have updated the
line, so its local cache line data is treated as invalid
(dataValid=false). But when the line is evicted, it must be written back
to downstream because the upstream may have the line in clean state
(UC). This change fixes it by performing copy back the UD_RU line while
keeping its dataValid as false.
Example error case:
- L3 was in UD_RSC and being evicted without back-invalidation. LLC (HN)
was in RU state.
- Because there's still upstream sharer, L3 sends WriteClean.
- Because the data state was unique and dirty, L3 sends CBWrData_UD_PD.
- LLC becomes UD_RU.
- When the line is evicted from LLC (LocalHN_Eviction), the line is just
dropped, causing the loss of the dirty copy
Co-authored-by: Minje Jun <minje.jun@samsung.com>
The `reset_vect` has exist for a long time and `reset_vect` will not
effect if the user gonna to use customized reset_vect. The CL added the
`auto_reset_vect` to let the config determine the `reset_vect` from
workload entry point or user-specified
Ref: https://gem5-review.googlesource.com/c/public/gem5/+/42053
Change-Id: I928c0dc42aaa85ceabf8d75f9654486496e0ffee
This change sets the `release` of the ARM board at the config file
instead of overriding the release on the ArmBoard. This change partially
solves issue 932 as the system taking and restoring the checkpoint is
consistent across KVM and timing CPUs respectively.
Signed-off-by: Kaustav Goswami <kggoswami@ucdavis.edu>
Fix#988. Rewrite statxFunc and copyOutStatxBuf to use platform-agnostic
stat system call, not Linux-specific statx system call.
Change-Id: I3d17e14684e9cd77cdbfd0141b93c3bcbd27dbeb
When running `scons build/ALL/gem5.opt --with-ubsan`, with GCC, the
following error was returned:
```
[ CXX] src/base/loader/image_file_data.cc -> ALL/base/loader/image_file_data.o
In file included from /usr/include/string.h:535,
from /usr/include/c++/11/cstring:42,
from src/base/cprintf_formats.hh:33,
from src/base/cprintf.hh:38,
from src/base/logging.hh:49,
from src/base/loader/image_file_data.cc:40:
In function ‘char* strcpy(char*, const char*)’,
inlined from ‘int gem5::loader::doGzipLoad(int)’ at src/base/loader/image_file_data.cc:70:11,
inlined from ‘gem5::loader::ImageFileData::ImageFileData(const string&)’ atsrc/base/loader/image_file_data.cc:116:24:
/usr/include/x86_64-linux-gnu/bits/string_fortified.h:79:33: error: ‘void* __builtin_memcpy(void*, const void*, long unsigned int)’ offset [0, 19] is out of the bounds [0, 0] [-Werror=array-bounds]
79 | return __builtin___strcpy_chk (__dest, __src, __glibc_objsize (__dest));
| ~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
cc1plus: all warnings being treated as errors
scons: *** [build/ALL/base/loader/image_file_data.o] Error 1
scons: building terminated because of errors.
```
As can be seen from this Daily test log:
https://github.com/gem5/gem5/actions/runs/8478384881, checkout@v2 and
{upload/download}-artifact@v3 was causing warnings to be thrown. This
fix upgrades all instances of these actions to the latest version (in
both cases, v4).
Currently, the citation string has a Unicode character. This works well
in gem5, but it breaks the gem5+SST simulation [1]. This change modifies
the letter "u" with umlaut to use TeX's escape sequence for this letter
instead of using the UTF-8 character.
[1] https://github.com/gem5/gem5/issues/982
Signed-off-by: Hoa Nguyen <hn@hnpl.org>
AMD's MI100 introduced a new register file called accumulation registers
for the matrix cores. In MI200 these were recombined into the same
register file according to the documentation. The accumulation register
file is the same size as the architectural register file, hence the size
is doubled.
The ISA spec does not explicitly state the register selector values,
however it does say that the accumulation offset from the kernel
dispatch packet should be added to the architecture register file
selector number when an instruction sets the ACC bit. Therefore we can
infer that the value must simply be an extension beyond the
architectural VGPRs.
This fixes errors of the form "invalid register selector: 512" (or
higher value). This was tested with the Learn the Basics tutorial
example on pytorch.org
Change-Id: I48ced1532fc166d2f5032fe21fbeba70ac77f258
v3 was causing a 'Node.js 16 actions are deprecated' error.
Note: download-artifact@v4 must be used with upload-artifact@v4 and
vice-versa.
Change-Id: Icb8ab6d27aed4557be95ce31dd89d4655010968e
This caused a 'Node.js 16 actions are deprecated;' error.
With this commit all our checkout actions are set to '@v4'.
Change-Id: I0f931bf7967f49ee44b7bf1d6a56e19f017fb948
This address, 0x0, is most likely a wrong address to call m5 ops.
The warning will catch the problem where m5op_addr is not initialized
properly.
Change-Id: I442b4806191ae6f5c137bc947f2a269684c599dd
Signed-off-by: Hoa Nguyen <hn@hnpl.org>
The existing implementation of vfmv instruction did not type cast the
first element of the source vector, which caused the "freg" to interpret
the result as a NaN.
With the type cast to f32, the value is correctly recognized as float
and sign extended to be stored in the fd register.
Git issue: https://github.com/gem5/gem5/issues/827
Change-Id: Ibe9873910827594c0ec11cb51ac0438428c3b54e
---------
Co-authored-by: Debjyoti B <bhatta53@imec.be>
Co-authored-by: Tommaso Marinelli <tommarin@ucm.es>
As pointed out here [1], the expected M5OP_ADDR for arm64 arch
is 0x10010000. This change reflects that.
[1] https://github.com/gem5/gem5/pull/725
Change-Id: I7e72f5ea20d4aacf3115a485ba7cd664d33d037e
Signed-off-by: Hoa Nguyen <hn@hnpl.org>
Remove the following files:
* src/dev/virtio/rng 2.cc
* src/dev/virtio/rng 2.hh
Which were a copy of rng.hh and rng.cc. Probably added to the repository
by accident. They were not compiled by scons
Change-Id: I9d1da19cc243c513ab7af887b1b6260d8e361b57
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
This PR fixes#948 in which running KVM CPUs through the updated gem5
interface in SE mode causes an immediate crash.
To fix this, I added a check to set_se_binary_workload that checks if
any of the cores are KVM, and if so, sets a couple of knobs for the
board and process that are required to make KVM work. The depecated
se.py script, which sets these knobs, is able to run KVM in SE mode just
fine, so doing the same here fixed the bug.
When running `scons build/ALL/gem5.opt --with-ubsan`, with GCC, the
following error was returned:
```
[ CXX] src/base/loader/image_file_data.cc -> ALL/base/loader/image_file_data.o
In file included from /usr/include/string.h:535,
from /usr/include/c++/11/cstring:42,
from src/base/cprintf_formats.hh:33,
from src/base/cprintf.hh:38,
from src/base/logging.hh:49,
from src/base/loader/image_file_data.cc:40:
In function ‘char* strcpy(char*, const char*)’,
inlined from ‘int gem5::loader::doGzipLoad(int)’ at src/base/loader/image_file_data.cc:70:11,
inlined from ‘gem5::loader::ImageFileData::ImageFileData(const string&)’ atsrc/base/loader/image_file_data.cc:116:24:
/usr/include/x86_64-linux-gnu/bits/string_fortified.h:79:33: error: ‘void* __builtin_memcpy(void*, const void*, long unsigned int)’ offset [0, 19] is out of the bounds [0, 0] [-Werror=array-bounds]
79 | return __builtin___strcpy_chk (__dest, __src, __glibc_objsize (__dest));
| ~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
cc1plus: all warnings being treated as errors
scons: *** [build/ALL/base/loader/image_file_data.o] Error 1
scons: building terminated because of errors.
```
I do not know the exact issue but using strcpy in this way (i.e.
`strcpy(char_pointer + offset, string)`) appears to trigger this error
with the undefined behavior sanitizer. The fix in this patch replaces
this with `strcat`.
Change-Id: I1a0c50c9022adc841e175aad0fe2247bfcb29d71
This commit adds support for vector unit-stride segment store operations
for RISC-V (vssegXeXX). This implementation is based in two types of
microops:
- VsSegIntrlv microops that properly interleave source registers into
structs.
- VsSeg microops that store data in memory as contiguous structs of
several fields.
Change-Id: Id80dd4e781743a60eb76c18b6a28061f8e9f723d
Gem5 issue: https://github.com/gem5/gem5/issues/382
Implement several features new in ROCm 6.0 and features required for
future devices. Includes the following:
- Support for multiple command processors
- Improve handling of unknown register addresses
- Use AddrRange for MMIO address regions
- Handle GART writes through SDMA copy
- Implement PCIe indirect reads and writes
- Improve PM4 write to check dword count
- Implement common MI300X instruction
This update modifies the test configuration to specify the versions of
resources used, rather than automatically using the latest versions.
Previously, if a resource was updated for a change, it could potentially
cause tests to fail if those tests were incompatible with the new
version of the resource.
Now, with this change, tests are tied to specific versions of resources,
ensuring that any updates to resources will require corresponding
updates to the tests to maintain compatibility.
Change-Id: I9633b1749f6c6c82af6aa6697b7e7656020f62fa
Currently gem5 assumes that there is only one command processor (CP)
which contains the PM4 packet processor. Some GPU devices have multiple
CPs which the driver tests individually during POST if they are used or
not. Therefore, these additional CPs need to be supported.
This commit allows for multiple PM4 packet processors which represent
multiple CPs. Each of these processors will have its own independent
MMIO address range. To more easily support ranges, the MMIO addresses
now use AddrRange to index a PM4 packet processor instead of the
hard-coded constexpr MMIO start and size pairs.
By default only one PM4 packet processor is created, meaning the
functionality of the simulation is unchanged for devices currently
supported in gem5.
Change-Id: I977f4fd3a169ef4a78671a4fb58c8ea0e19bf52c
PCIe can read/write to any 32-bit address using the PCI index/index2
registers as an address and then reading/writing the corresponding
data/data2 register.
This commit adds this functionality and removes one magic value being
written to support GPU POST. This feature is disabled for Vega10 which
relies on an MMIO trace for too many values to implement in the MMIO
interface.
Change-Id: Iacfdd1294a7652fc3e60304b57df536d318c847b
The SRBM write packets where previously not required. This commit
implements SRBM writes to set a register by using the new setRegVal
interface. SRBM writes seem to be used for SRIOV enabled devices.
Change-Id: I202653d339e882e8de59d69a995f65332b2dfb8c
The top level AMDGPUDevice currently reads/writes all unknown registers
to/from a map containing the previously written value. This is intended
as a way to handle registers that are not part of the model but the
driver requires for functionality. Since this is at the top level, it
can mask changes to register values which do not go through the same
interface. For example, reading an MMIO, changing via PM4 queue, and
reading again returns the stale cached value.
This commit removes the usage of the regs map in AMDGPUDevice,
implements some important MMIOs that were previously handled by it, and
moves the unknown register handling to the NBIO aperture only. To reduce
the number of additional MMIOs to implement, the display manager in
vega10 is now disabled.
Change-Id: Iff0a599dd82d663c7e710b79c6ef6d0ad1fc44a2
The SDMA engine can potentially be used to write to the GART address
range. Since gem5 has a shadow copy of the GART table to avoid sending
functional reads to device memory, the GART table must be updated when
copying to the GART range.
This changeset adds a check in the VM for GART range and implements the
SDMA copy packet writing to the GART range. A fatal is added to write
and ptePde, which are the only other two ways to write to memory, as
using these packets to update the GART table has not been observed.
Change-Id: I1e62dfd9179cc9e987659e68414209fd77bba2bd
The write data packet can write multiple dwords but currently always
assumes there is one dword, which can cause some write data to be
missed. This case is not common, but the number of dwords is implicitly
defined in the PM4 header.
This changeset passes the PM4 header to write data so that the correct
number of dwords can be determined. For now we assume no page crossing
when writing multiple dwords as the driver should be checking for that.
Change-Id: I0e8c3cbc28873779f468c2a11fdcf177210a22b7
The ROCm 6.0 driver adds a node_id field to interrupts which must match
before passing on the interrupt to be cleared by the cookie from gem5's
interrupt handler implementation. Add this field and enable for gfx942.
The usage of the field can be seen in event_interrupt_isr_v9_4_3 at
https://github.com/ROCm/ROCK-Kernel-Driver/blob/roc-6.0.x/drivers/
gpu/drm/amd/amdkfd/kfd_int_process_v9.c#L449
Change-Id: Iae8b8f0386a5ad2852b4a3c69f2c161d965c4922
The main decoder for GPU instructions looks at the first 9 bits of a
dword to determine either the instruction or a subDecode table with more
information for specific instructions types. For flat instructions the
first 9 bits currently consist of 6 fixed encoding bits, a reserved bit,
and the first two bits of the opcode. Hence to support all opcodes there
are four indirections to the flat subDecode table. In MI300 the reserved
bit is part of a field to determine memory scope and therefore may be
non-zero.
This commit adds four addition calls to the subDecode table for the
cases where the scope bit is 1. See page 468 (PDF page 478) below:
https://www.amd.com/content/dam/amd/en/documents/instinct-tech-docs/
instruction-set-architectures/
amd-instinct-mi300-cdna3-instruction-set-architecture.pdf
Change-Id: Ic3c786f0ca00a758cbe87f42c5e3470576f73a32
gpu-compute: Add support for skipping GPU kernels
This commit adds two new command-line options:
--skip-until-gpu-kernel N
Skips (non-blit) GPU kernels until the target kernel is reached.
Execution continues normally from there. Blit kernels are not skipped
because they are responsible for copying the kernel code and metadata
for the non-blit kernels. Note that skipping kernels can impact
correctness; this feature is only useful if the kernel of interest has
no data-dependent behavior, or its data-dependent behavior is not based
on data generated by the skipped kernels.
--exit-after-gpu-kernel N
Ends the simulation after completing (non-blit) GPU kernel N.
This commit also renames two existing command-line options:
--debug-at-gpu-kernel -> --debug-at-gpu-task
--exit-at-gpu-kernel -> --exit-at-gpu-task
These were renamed because they count GPU tasks, which include both
kernels launched by the application as well as blit kernels.
Change-Id: If250b3fd2db05c1222e369e9e3f779c4422074bc
MI200 adds support for four FP32 packed math instructions. These are
VOP3P instructions which have a negative input modifier field. The
description made it unclear if these were used for F32 packed math
however the assembly of some Tensile kernels are using these modifiers
therefore adding support for them. Tested with PyTorch nn.Dropout kernel
which is using negative modifiers.
Change-Id: I568a18c084f93dd2a88439d8f451cf28a51dfe79
The datatype is U32 but should be F32. This is causing an implicit cast
leading to incorrect results. This fixes nn.Dropout in PyTorch.
Change-Id: I546aa917fde1fd6bc832d9d0fa9ffe66505e87dd
This change fixes two issues:
1) The --cacheline_size option was setting the system cache line size
but not the Ruby cache line size, and the mismatch was causing assertion
failures.
2) The submitDispatchPkt() function accesses the kernel object in
chunks, with the chunk size equal to the cache line size. For cache line
sizes >64B (e.g. 128B), the kernel object is not guaranteed to be
aligned to a cache line and it was possible for a chunk to be partially
contained in two separate device memories, causing the memory access to
fail.
Change-Id: I8e45146901943e9c2750d32162c0f35c851e09e1
Co-authored-by: Michael Boyer <Michael.Boyer@amd.com>
From [1] The PrivateL1PrivateL2Cache hierarchy has been amended with an
MMUCache, which is basically a small cache in front of the page table
walker.
Not every ISA makes use of it.
Arm for example already implements caching of page table walks, via the
partial_levels parameter in the ArmTLB.
With this patch we define a new module which explicitly makes use of the
WalkCache. Configurations that do not require
another cache in the first level of the memsys (for the ptw) can use the
PrivateL1PrivateL2CacheHierarchy
[1]: https://gem5-review.googlesource.com/c/public/gem5/+/49364
In the RISC-V unprivileged spec[1], the misaligned load/store support is
depend on the EEI.
In the RISC-V privileged spec ver1.12[2], the PMA specify wether the
misaligned access is support for each data width and the memory region.
In the [3] of `mcause` spec, we cloud directly raise misalign exception
if there is no memory region misalignment support. If the part of memory
region support misaligned-access, we need to translate the `vaddr` to
`paddr` first then check the `paddr` later. The page-fault or
access-fault is rose before misalign-fault.
The benefit of moving check_alignment option from ISA option to PMA
option is we can specify the part region of memory support misalign
load/store.
MMU will check alignment with virtual addresss if there is no misaligned
memory region specified. If there are some misaligned memory region
supported, translate address first and check alignment at final.
[1]
https://github.com/riscv/riscv-isa-manual/blob/main/src/rv32.adoc#base-instruction-formats
[2]
https://github.com/riscv/riscv-isa-manual/blob/main/src/machine.adoc#physical-memory-attributes
[3]
https://github.com/riscv/riscv-isa-manual/blob/main/src/machine.adoc#machine-cause-register-mcause
