This makes what are configuration and what are internal SCons variables
explicit and separate, and makes it unnecessary to call out what
variables to export to C++.
These variables will also be plumbed into and out of kconfiglib in later
changes.
Change-Id: Iaf5e098d7404af06285c421dbdf8ef4171b3f001
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/56892
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Gabe Black <gabe.black@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Remove the line "For use for simulation and test purposes only" in files
were AMD is the only copyright holder listed in the header. This happens
to be the case for all files where this line exists, removing it
completely from gem5.
Change-Id: I623f266b002f564301b28774f49081099cfc60fd
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/53943
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Move GpuTLB and TLBCoalescer to GCN3 as the TLB format is specific to
GCN3 and SE mode / APU simulation. Vega will have its own TLB,
coalescer, and walker suitable for a dGPU. This also adds a using alias
for the TLB translation state to reduce the number of references to
TheISA and X86ISA. X86 specific includes are also removed.
Change-Id: I34448bb4e5ddb9980b34a55bc717bbcea0e03db5
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/49847
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Reviewed-by: Matt Sinclair <mattdsinclair@gmail.com>
Maintainer: Matt Sinclair <mattdsinclair@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
This function used makeAtomicOpFunctor to create a unique_ptr which
pointed to an AtomicOpFunctor *, which it immediately extracted with
.get(). Then since the temporary unique_ptr went out of scope, it
deleted the AtomicOpFunctor which it just returned a pointer to.
Instead, that function should create a local unique_ptr to pass
ownership of the object off to. It will still be cleaned up when it
goes out of scope, but not before it's done being used.
Change-Id: I74a0bcbb719a78a3e9ec8cb2ea5aa15120da0456
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/49023
Reviewed-by: Matt Sinclair <mattdsinclair@gmail.com>
Reviewed-by: Bobby R. Bruce <bbruce@ucdavis.edu>
Reviewed-by: Kyle Roarty <kyleroarty1716@gmail.com>
Maintainer: Matt Sinclair <mattdsinclair@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Now that we're using c++17, the type_traits with a ::value member have
a _v alias which reduces verbosity. Or on other words
std::is_integral<T>::value
can be replaced with
std::is_integral_v<T>
Make this substitution throughout the code base. In places where gem5
introduced it's own similar templates, add a V alias, spelled
differently to match gem5's internal style.
gem5: :IsVarArgs<T>::value => gem5::IsVarArgsV<T>
Change-Id: I1d84ffc4a236ad699471569e7916ec17fe5f109a
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/48604
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Maintainer: Bobby R. Bruce <bbruce@ucdavis.edu>
Tested-by: kokoro <noreply+kokoro@google.com>
Scalar sources can either be a general-purpose register or a constant
register that holds a single value.
If we don't check for if the register is a general-purpose register,
it's possible that we get a constant register, which then causes all of
the register mapping code to break, as the constant registers aren't
supposed to be mapped like the general-purpose registers are.
This fix adds an isScalarReg check to the instruction encodings that
were missing it.
Change-Id: I3d7d5393aa324737301c3269cc227b60e8a159e4
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/48344
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Matt Sinclair <mattdsinclair@gmail.com>
Reviewed-by: Bobby R. Bruce <bbruce@ucdavis.edu>
Reviewed-by: Matthew Poremba <matthew.poremba@amd.com>
Maintainer: Matt Sinclair <mattdsinclair@gmail.com>
Add support for LDS accesses by allowing Flat instructions to dispatch
into the local memory pipeline if the requested address is in the group
aperture.
This requires implementing LDS accesses in the Flat initMemRead/Write
functions, in a similar fashion to the DS functions of the same name.
Because we now can potentially dispatch to the local memory pipeline,
this change also adds a check to regain any tokens we requested as a
flat instruction.
Change-Id: Id26191f7ee43291a5e5ca5f39af06af981ec23ab
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/48343
Reviewed-by: Matt Sinclair <mattdsinclair@gmail.com>
Reviewed-by: Matthew Poremba <matthew.poremba@amd.com>
Maintainer: Matt Sinclair <mattdsinclair@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
This implements the 96 and 128b ds_read/write instructions in a similar
fashion to the 3 and 4 dword flat_load/store instructions.
These instructions are treated as reads/writes of 3 or 4 dwords, instead
of as a single 96b/128b memory transaction, due to the limitations of
the VecOperand class used in the amdgpu code.
In order to handle treating the memory transaction as multiple dwords,
the patch also adds in new initMemRead/initMemWrite functions for ds
instructions. These are similar to the functions used in flat
instructions for the same purpose.
Change-Id: I0f2ba3cb7cf040abb876e6eae55a6d38149ee960
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/48342
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Alex Dutu <alexandru.dutu@amd.com>
Reviewed-by: Matt Sinclair <mattdsinclair@gmail.com>
Maintainer: Matt Sinclair <mattdsinclair@gmail.com>
Certain DS insts are classfied as Loads, but don't actually go through
the memory pipeline. However, any instruction classified as a load
marks its destination registers as free in the memory pipeline.
Because these instructions didn't use the memory pipeline, they
never freed their destination registers, which led to a deadlock.
This patch explicitly calls the function used to free the destination
registers in the execute() method of those Load instructions that
don't use the memory pipeline.
Change-Id: Ic2ac2e232c8fbad63d0c62c1862f2bdaeaba4edf
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/48019
Reviewed-by: Matt Sinclair <mattdsinclair@gmail.com>
Reviewed-by: Bobby R. Bruce <bbruce@ucdavis.edu>
Maintainer: Matt Sinclair <mattdsinclair@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
When the Vega ISA got committed, it lacked the request counter
tracking for memory requests that existed in the GCN3 code.
Instead of copying over the same lines from the GCN3 code to the Vega
code, this commit makes the various memory pipelines handle updating the
request counter information instead, as every memory instruction calls a
memory pipeline.
This commit also adds an issueRequest in scalar_memory_pipeline, as
previously, the gpuDynInsts were explicitly placed in the queue of
issuedRequests.
Change-Id: I5140d3b2f12be582f2ae9ff7c433167aeec5b68e
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/45347
Reviewed-by: Matt Sinclair <mattdsinclair@gmail.com>
Maintainer: Matt Sinclair <mattdsinclair@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
vector_register_file uses the exec_mask of a memory instruction in
order to determine if it should mark a register as in-use or not.
Previously, the exec_mask of memory instructions was only set on
execution of that instruction, which occurs after the code in
vector_register_file. This led to the code reading potentially garbage
data, leading to a scenario where a register would be marked used when
it shouldn't be.
This fix sets the exec_mask of memory instructions in schedule_stage,
which works because the only time the wavefront execMask() is updated is
on a instruction executing, and we know the previous instruction will
have executed by the time schedule_stage executes, due to the order the
pipeline is executed in.
This also undoes part of a patch from last year (62ec973) which treated
the symptom of accidental register allocation, without preventing the
registers from being allocated in the first place.
This patch also removes now redundant code that sets the exec_mask in
instructions.cc for memory instructions
Change-Id: Idabd35020000764fb06133ac2458606c1aaf6f04
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/45346
Reviewed-by: Matt Sinclair <mattdsinclair@gmail.com>
Reviewed-by: Matthew Poremba <matthew.poremba@amd.com>
Maintainer: Matthew Poremba <matthew.poremba@amd.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Certain memory writes were reading their registers in
initiateAcc, which lead to scenarios where a subsequent instruction
would execute, clobbering the value in that register before the memory
writes' initiateAcc method was called, causing the memory write to read
wrong data.
This patch moves all register reads to execute, preventing the above
scenario from happening.
Change-Id: Iee107c19e4b82c2e172bf2d6cc95b79983a43d83
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/45345
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Matt Sinclair <mattdsinclair@gmail.com>
Reviewed-by: Matthew Poremba <matthew.poremba@amd.com>
Reviewed-by: Alex Dutu <alexandru.dutu@amd.com>
Maintainer: Matt Sinclair <mattdsinclair@gmail.com>
Apply the gem5 namespace to the codebase.
Some anonymous namespaces could theoretically be removed,
but since this change's main goal was to keep conflicts
at a minimum, it was decided not to modify much the
general shape of the files.
A few missing comments of the form "// namespace X" that
occurred before the newly added "} // namespace gem5"
have been added for consistency.
std out should not be included in the gem5 namespace, so
they weren't.
ProtoMessage has not been included in the gem5 namespace,
since I'm not familiar with how proto works.
Regarding the SystemC files, although they belong to gem5,
they actually perform integration between gem5 and SystemC;
therefore, it deserved its own separate namespace.
Files that are automatically generated have been included
in the gem5 namespace.
The .isa files currently are limited to a single namespace.
This limitation should be later removed to make it easier
to accomodate a better API.
Regarding the files in util, gem5:: was prepended where
suitable. Notice that this patch was tested as much as
possible given that most of these were already not
previously compiling.
Change-Id: Ia53d404ec79c46edaa98f654e23bc3b0e179fe2d
Signed-off-by: Daniel R. Carvalho <odanrc@yahoo.com.br>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/46323
Maintainer: Bobby R. Bruce <bbruce@ucdavis.edu>
Reviewed-by: Bobby R. Bruce <bbruce@ucdavis.edu>
Reviewed-by: Matthew Poremba <matthew.poremba@amd.com>
Tested-by: kokoro <noreply+kokoro@google.com>
This commit removes functions that indexed into the
vectors that held the operands. Instead, for-each loops
are used, iterating through one of 6 vectors
(src, dst, srcScalar, srcVec, dstScalar, dstVec)
that all hold various (potentially overlapping)
combinations of the operands.
Change-Id: Ia3a857c8f6675be86c51ba2f77e3d85bfea9ffdb
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/42212
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Matt Sinclair <mattdsinclair@gmail.com>
Maintainer: Matt Sinclair <mattdsinclair@gmail.com>
This change removes the GPUDynInstPtr argument from
getRegisterIndex(). The dynamic inst was only needed
to get access to its parent WF's state so it could
determine the number of scalar registers the wave was
allocated. However, we can simply pass the number of
scalar registers directly. This cuts down on shared
pointer usage.
Change-Id: I29ab8d9a3de1f8b82b820ef421fc653284567c65
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/42210
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Matt Sinclair <mattdsinclair@gmail.com>
Maintainer: Matt Sinclair <mattdsinclair@gmail.com>
