This patch is adding the NS bit to CHI requests to make sure they are
properly tagged according to their security
Change-Id: I33d3610edefbb5a05a6090e9125c35d4fb8bca58
Reviewed-by: Tiago Muck <tiago.muck@arm.com>
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Introduce far atomic operations in CHI protocol.
Three configuration parameters have been used to tune this behavior:
policy_type: sets the atomic policy to one of the described in our paper
atomic_op_latency: simulates the AMO ALU operation latency
comp_anr: configures the Atomic No return transaction to split
CompDBIDResp into two different messages DBIDResp and Comp
Change-Id: I087afad9ad9fcb9df42d72893c9e32ad5a5eb478
The GPU cache models do not support cache bypassing when the GLC or SLC
AMDGPU instruction modifiers are used in a load or store. This commit
adds cache bypass support by introducing new transitions in the
coherence protocol used by the GPU memory system. Now, instructions with
the GLC bit set will not cache in the L1 and instructions with SLC bit
set will not cache in L1 or L2.
Change-Id: Id29a47b0fa7e16a21a7718949db802f85e9897c3
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/66991
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Maintainer: Matt Sinclair <mattdsinclair@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Matt Sinclair <mattdsinclair@gmail.com>
Apply the gem5 namespace to the codebase.
Some anonymous namespaces could theoretically be removed,
but since this change's main goal was to keep conflicts
at a minimum, it was decided not to modify much the
general shape of the files.
A few missing comments of the form "// namespace X" that
occurred before the newly added "} // namespace gem5"
have been added for consistency.
std out should not be included in the gem5 namespace, so
they weren't.
ProtoMessage has not been included in the gem5 namespace,
since I'm not familiar with how proto works.
Regarding the SystemC files, although they belong to gem5,
they actually perform integration between gem5 and SystemC;
therefore, it deserved its own separate namespace.
Files that are automatically generated have been included
in the gem5 namespace.
The .isa files currently are limited to a single namespace.
This limitation should be later removed to make it easier
to accomodate a better API.
Regarding the files in util, gem5:: was prepended where
suitable. Notice that this patch was tested as much as
possible given that most of these were already not
previously compiling.
Change-Id: Ia53d404ec79c46edaa98f654e23bc3b0e179fe2d
Signed-off-by: Daniel R. Carvalho <odanrc@yahoo.com.br>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/46323
Maintainer: Bobby R. Bruce <bbruce@ucdavis.edu>
Reviewed-by: Bobby R. Bruce <bbruce@ucdavis.edu>
Reviewed-by: Matthew Poremba <matthew.poremba@amd.com>
Tested-by: kokoro <noreply+kokoro@google.com>
A single functionalRead may not be able to get the whole latest
copy of the block in protocols that have features such as:
- a cache line can be partially present and dirty in a controller
- a cache line can be transferred over the network using multiple
protocol-level messages
To support these cases, this patch adds an alternative function:
bool functionalRead(PacketPtr, WriteMask&)
Protocols that implement this function can partially update
the packet and use the WriteMask to mark updated bytes.
The top-level RubySystem:functionalRead then issues functionalRead
to controllers until the whole block is read.
This patch implements functionalRead(PacketPtr, WriteMask&) for all the
common messages and SimpleNetwork. A protocol-specific implementation
will be provided in a future patch.
The new interface is compiled only if required by the protocol (see
src/mem/ruby/system/SConscript). Otherwise the original interface is
used thus maintaining compatibility with previous protocols.
Change-Id: I4600d5f1d7cc170bd7b09ccd09bfd3bb6605f86b
Signed-off-by: Tiago Mück <tiago.muck@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/31416
Reviewed-by: Matthew Poremba <matthew.poremba@amd.com>
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
This patch augments the MESI_Three_Level Ruby protocol with hardware
transactional memory support.
The HTM implementation relies on buffering of speculative memory updates.
The core notifies the L0 cache controller that a new transaction has
started and the controller in turn places itself in transactional state
(htmTransactionalState := true).
When operating in transactional state, the usual MESI protocol changes
slightly. Lines loaded or stored are marked as part of a transaction's
read and write set respectively. If there is an invalidation request to
cache line in the read/write set, the transaction is marked as failed.
Similarly, if there is a read request by another core to a speculatively
written cache line, i.e. in the write set, the transaction is marked as
failed. If failed, all subsequent loads and stores from the core are
made benign, i.e. made into NOPS at the cache controller, and responses
are marked to indicate that the transactional state has failed. When the
core receives these marked responses, it generates a HtmFailureFault
with the reason for the transaction failure. Servicing this fault does
two things--
(a) Restores the architectural checkpoint
(b) Sends an HTM abort signal to the cache controller
The restoration includes all registers in the checkpoint as well as the
program counter of the instruction before the transaction started.
The abort signal is sent to the L0 cache controller and resets the
failed transactional state. It resets the transactional read and write
sets and invalidates any speculatively written cache lines. It also
exits the transactional state so that the MESI protocol operates as
usual.
Alternatively, if the instructions within a transaction complete without
triggering a HtmFailureFault, the transaction can be committed. The core
is responsible for notifying the cache controller that the transaction
is complete and the cache controller makes all speculative writes
visible to the rest of the system and exits the transactional state.
Notifting the cache controller is done through HtmCmd Requests which are
a subtype of Load Requests.
KUDOS:
The code is based on a previous pull request by Pradip Vallathol who
developed HTM and TSX support in Gem5 as part of his master’s thesis:
http://reviews.gem5.org/r/2308/index.html
JIRA: https://gem5.atlassian.net/browse/GEM5-587
Change-Id: Icc328df93363486e923b8bd54f4d77741d8f5650
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/30319
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Standardize all header guards in the mem directory according to the most
frequent patterns. In general they have the form:
mem: __FOLDER_TREE_FILE_NAME_HH__
ruby: __FOLDER_TREE_FILENAME_HH__
Change-Id: I983853e292deb302becf151bf0e970057dc24774
Reviewed-on: https://gem5-review.googlesource.com/7881
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>
Allow usage of packet class in ruby for convenience purposes. This may be
used to access members of the packet/request class (e.g., via helper
functions) and/or push protocol specific information to the packets
SenderState without needing to modify SLICC types and protocols in multiple
locations.
This patch eliminates the type Address defined by the ruby memory system.
This memory system would now use the type Addr that is in use by the
rest of the system.
This patch transitions the Ruby Message and its derived classes from
the ad-hoc RefCountingPtr to the c++11 shared_ptr. There are no
changes in behaviour, and the code modifications are mainly replacing
"new" with "make_shared".
The cloning of derived messages is slightly changed as they previously
relied on overriding the base-class through covariant return types.
This patch allows ruby to have multiple clock domains. As I understand
with this patch, controllers can have different frequencies. The entire
network needs to run at a single frequency.
The idea is that with in an object, time is treated in terms of cycles.
But the messages that are passed from one entity to another should contain
the time in Ticks. As of now, this is only true for the message buffers,
but not for the links in the network. As I understand the code, all the
entities in different networks (simple, garnet-fixed, garnet-flexible) should
be clocked at the same frequency.
Another problem is that the directory controller has to operate at the same
frequency as the ruby system. This is because the memory controller does
not make use of the Message Buffer, and instead implements a buffer of its
own. So, it has no idea of the frequency at which the directory controller
is operating and uses ruby system's frequency for scheduling events.
This patch was initiated so as to remove reference to g_system_ptr,
the pointer to Ruby System that is used for getting the current time.
That simple change actual requires changing a lot many things in slicc and
garnet. All these changes are related to how time is handled.
In most of the places, g_system_ptr has been replaced by another clock
object. The changes have been done under the assumption that all the
components in the memory system are on the same clock frequency, but the
actual clocks might be distributed.
This patch adds support to different entities in the ruby memory system
for more reliable functional read/write accesses. Only the simple network
has been augmented as of now. Later on Garnet will also support functional
accesses.
The patch adds functional access code to all the different types of messages
that protocols can send around. These messages are functionally accessed
by going through the buffers maintained by the network entities.
The patch also rectifies some of the bugs found in coherence protocols while
testing the patch.
With this patch applied, functional writes always succeed. But functional
reads can still fail.
It is useful for Ruby to understand from whence request packets came.
This has all request packets going into Ruby pass the contextId value, if
it exists. This supplants the old libruby proc_id value passed around in
all the Messages, so I've also removed the unused unsigned proc_id; member
generated by SLICC for all Message types.
The goal of the patch is to do away with the CacheMsg class currently in use
in coherence protocols. In place of CacheMsg, the RubyRequest class will used.
This class is already present in slicc_interface/RubyRequest.hh. In fact,
objects of class CacheMsg are generated by copying values from a RubyRequest
object.
