The code in this #ifdef isn't turned on by anything, and either has or
likely will bitrot, especially since there are no tests to even
determine manually if the code they guard works. They are also
preceeded by panics which say that the code they guard is known not to
work now anyway.
This change also gets rid of TheISA in that file since the only reason
it was around was for vtophys in the guarded code.
Change-Id: I59fd8974d0dd3d7ab0d5a8ccfa6a446d2da41eb0
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/22265
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
Tested-by: kokoro <noreply+kokoro@google.com>
These are the from the various bits of the tsunami platform. They
primarily consisted of "using TheISA" which could be replaced with
using AlphaISA or removed altogether (I went with the later), and use
of TheISA:: which I replaced with AlphaISA::.
Change-Id: Ic52577c65241a92a3f1ae318a19431f8faa50a66
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/22264
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
Tested-by: kokoro <noreply+kokoro@google.com>
The first function handles the repetitive process of creating an
ObjectFile for a particular purpose and checking if that was
successful.
The second conditionally offsets the images in case they were, for
instance, loaded from an ELF file which already had them in the right
place. It offsets them so that their entry point (which will be zero
for raw images) lines up with the appropriate entry address (which will
be at the start of raw images).
This is more correct in more cases, and also removes a lot of
redundancy. There's still a lot of redundancy in the code which sets
up the symbol tables, but there are some irregularities which make that
harder to wrap in a helper function.
Change-Id: I2fee8b2175faff284ff9e007307f7769043497a1
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/21469
Reviewed-by: Brandon Potter <Brandon.Potter@amd.com>
Maintainer: Gabe Black <gabeblack@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Typically, a memory controller is assigned an address range of the
form [start, end). This address range might be interleaved and
therefore only a non-continuous subset of the addresses in the address
range is handed by this controller.
Prior to this patch, the DRAM controller was unaware of the
interleaving and as a result the address range could affect the
mapping of addresses to DRAM ranks, rows and columns. This patch
changes the DRAM controller, to transform the input address to a
continuous range of the form [0, size). As a result the DRAM
controller always operates on a dense and continuous address range
regardlesss of the system configuration.
Change-Id: I7d273a630928421d1854658c9bb0ab34e9360851
Signed-off-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/19328
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Reviewed-by: Wendy Elsasser <wendy.elsasser@arm.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Often a request that hits on an MSHR has to be deferred as it can't be
serviced by the current response.
For example, a request that requires writable has to be deferred when
the response is expected to bring in a read-only copy of the
block. However, there are cases where the response, although not
expected to do so, brings a writable copy and as a result we also
service deferred targets. In such cases, we promote deferred targets
up until the first that can't be serviced by the current response
(e.g., cache maintainance operation). If the first deferred target is
incompatible we don't promote any targets at all.
Change-Id: Ib3e13be51120b7c0f0053b83b76bde03e1b7dd4e
Signed-off-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/22127
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
The MSHR keeps track of outstanding writes and services them as a
whole line write whenever possible. To do this the outstanding writes
have to be compatible (e.g., not strictly ordered). Prior to this
change, due to this tracking mechanism, the MSHR would not service a
WriteLineReq with flags that do not allow merging as a full line write
even if it was the first target triggering an assertion. This
changeset fixes this bug.
Change-Id: I2cbf5ece0c108c1fcfe6855e8f194408d5ab8ce2
Signed-off-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/22126
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Tested-by: kokoro <noreply+kokoro@google.com>
The consolePanicEvent pointer and addConsoleFuncEvent template were
inherited from Alpha and were not used (and probably make no sense) for
MIPS or RISCV which (to my knowledge) don't have the idea of a
"console" binary.
Change-Id: I109b866a65f69c7334062f7304c7b18acc51d99d
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/21782
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
This was useful when transitioning away from the CPU based
comInstEventQueue, but now that objects backing the ThreadContexts have
access to the underlying comInstEventQueue and can manipulate it
directly, they don't need to do so through a generic interface.
Getting rid of this function narrows and simplifies the interface.
Change-Id: I202d466d266551675ef6792d38c658d8a8f1cb8b
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/22113
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>
This switches to letting the ThreadContexts use a thread based/local
comInstEventQueue instead of falling back to the CPU's array. Because
the implementation is no longer shared and it's not given where the
comInstEventQueue (or other implementation) should be accessed, the
default implementation has been removed.
Also, because nobody is using the CPU's array of event queues, those
have been removed.
Change-Id: I515e6e00a2174067a928c33ef832bc5c840bdf7f
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/22110
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>
These then just use the comInstEventQueue array from the CPU, but soon
they will actually be self contained and allow the thread context to
use whatever mechanism it wants.
Also, now that the thread contexts need to exist before instruction
count based events can be scheduled, setting up max instruction based
events needs to happen in init after the CPU subclasses have had a
chance to set up the threadContexts vector.
Change-Id: I34bb401633d277a60be74e30d5a478a149b972ea
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/22108
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>
These can now be built without referring to anything in ThreadContext
and so can be built even with the NULL ISA. This means the pcEventQueue
can be unconditionally built into the System class. Even though the
pcEventQueue is going away, this still makes it possible for System to
be a PCEventScope unconditionally.
Change-Id: Ia342bb7972b1b5ce95033176d72af4bfa343560f
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/22104
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>
First of all, this would arbitrarily skip events based on when they
were encountered in the queue. Second, this is one of the three places
where the ThreadContext is actually accessed in pc_event.cc. By
removing this and the other uses, this file can be included even when
using the NULL ISA, and a lot of #ifdefs can be removed.
Change-Id: If81f5e9ff9d3f9833145fec0b6062b4bda8d2e47
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/22100
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>
This abstraction will allow scheduling PCEvents for a particular
ThreadContext, all contexts on a CPU, all contexts in a system, etc.,
and delegates scheduling and removing events to each particular scope.
Right now the PCEventQueue is the only implementor of the PCEventSCope
interface.
Change-Id: I8fb62931511136229915c2e19d36aae7ffdec9df
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/22099
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Adding these tests supercedes the unittest/strnumtest.cc
and unittest/tokentest.cc tests. They have thereby been removed.
Function "to_number" in base/str.hh previously failed to cast negative
float/double numbers. This was due to the use of
std::numeric_limits<T>::min() instead of std::numeric_limits<T>::lowest()
to determine whether a string-to-float/double conversion was
"Out of range". Tests "StrTest.ToNumberFloatNegative" and
"StrTest.ToNumberDoubleNegative" exposed this bug. It has been fixed.
Methods "split_first" and "split_last" in base/str.hh have had their
documentation updated to remove abiguity in their functionality.
Change-Id: I16e0fe40d884e22dd010db4045857eb6e7f33d4a
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/22084
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
Tested-by: kokoro <noreply+kokoro@google.com>
FutexMap::wakeup is called when the futex(TGT_FUTEX_WAKE syscall is done.
FutexMap maintains a list of sleeping threads for each futex address
added on FutexMap::suspend, and entries are removed from the list
at FutexMap::wakeup.
The problem is that this system was not taking into account that threads
can be woken up by memory accesses to locked addresses via the path:
SimpleThread::activate
BaseSimpleCPU::wakeup
AbstractMemory::checkLockedAddrList
AbstractMemory::access
DRAMCtrl::recvAtomic
CoherentXBar::recvAtomicBackdoor
SimpleExecContext::writeMem
which happens on trivial pthread examples on ARM at least. The instruction
that locked memory in those test cases was LDAXR.
This could lead futex(TGT_FUTEX_WAKE to awake a thread that is already
awake but is first on the sleeping thread list, instead of a sleeping one,
which can lead all threads to incorrectly sleep and in turn to
"simulate() limit reached".
To implement this, ThreadContext::activate return now returns a boolean
that indicates if the state changed. suspend and halt are also modified
to also return a boolean in the same case for symmetry, although this is
not strictly necessary for the current patch.
Change-Id: Ia6b4d3e6148c64721d810b8f1fffaa208a394b06
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/21606
Reviewed-by: Brandon Potter <Brandon.Potter@amd.com>
Maintainer: Brandon Potter <Brandon.Potter@amd.com>
Tested-by: kokoro <noreply+kokoro@google.com>
The TLBs now create the stage 2 MMUs as children, and since those are
specialized for instruction and data, the CPU needs to use ArmITB or
ArmDTB instead of ArmTLB which is the base class without an MMU. This
was changed for the BaseCPU and SimpleCPU checker already, but the TLBs
are added in the O3 checker CPU as well.
Change-Id: I498f247f376c8721fb70ce26c0f1b0815b12fe2d
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/22039
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Since glibc 2.30 the sysctl() function has been declared deprecated and
it will be deleted in future versions. This patch removes the support
for the sysctl system call in SE mode (which is currently serviced
calling the sysctl() function) if gem5 is built against glibc, keeping
it with other libc implementations, as a temporary measure to prevent
the generation of a compilation error. Note that this system call in
gem5 is only supported for the arm/freebsd architecture.
Change-Id: Ie5fcb983d15c0a27c7820d24250d7ae5dbe12355
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/21519
Reviewed-by: Brandon Potter <Brandon.Potter@amd.com>
Maintainer: Brandon Potter <Brandon.Potter@amd.com>
Tested-by: kokoro <noreply+kokoro@google.com>
This patch is pulling the on-chip memory outside of the on_chip_devices
list.
The external interface will be more or less the same: configuration
scripts will still use the attachOnChipIO method; a new kw argument has
been added in order to store mem_ports.
We want to provide to on-chip memory the same mechanism used when
collecting on-chip dma ports. This is needed when using Ruby, since
we need to pass a non None mem_ports to prevent the bootmem to be
wired to the bus.
Change-Id: Ifc519c3072dc5de1530772c70c80dc2094e2c54c
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/22000
Reviewed-by: Bobby R. Bruce <bbruce@ucdavis.edu>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
Tested-by: kokoro <noreply+kokoro@google.com>
The TLBs now create the stage 2 MMUs as children, and since those are
specialized for instruction and data, the CPU needs to use ArmITB or
ArmDTB instead of ArmTLB which is the base class without an MMU. This
was changed for the BaseCPU already, but the TLBs are added in the
checker CPU as well.
Change-Id: Ide8ce950622b40f69c37bbe2ea0d22295b76d7a6
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/21979
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>
