gpu-compute: Add support for skipping GPU kernels
This commit adds two new command-line options:
--skip-until-gpu-kernel N
Skips (non-blit) GPU kernels until the target kernel is reached.
Execution continues normally from there. Blit kernels are not skipped
because they are responsible for copying the kernel code and metadata
for the non-blit kernels. Note that skipping kernels can impact
correctness; this feature is only useful if the kernel of interest has
no data-dependent behavior, or its data-dependent behavior is not based
on data generated by the skipped kernels.
--exit-after-gpu-kernel N
Ends the simulation after completing (non-blit) GPU kernel N.
This commit also renames two existing command-line options:
--debug-at-gpu-kernel -> --debug-at-gpu-task
--exit-at-gpu-kernel -> --exit-at-gpu-task
These were renamed because they count GPU tasks, which include both
kernels launched by the application as well as blit kernels.
Change-Id: If250b3fd2db05c1222e369e9e3f779c4422074bc
Previously, the data caches were invalidated at the start of each
kernel. This commit adds support for invalidating instruction cache at
kernel launch time
Change-Id: I32e50f63fa1442c2514d4dd8f9d7689759f503d3
Starting with gfx900 (Vega) the LDS and scratch apertures can be queried
using a new s_getreg_b32 instruction. If the instruction is called with
the SH_MEM_BASES argument it returns the upper 16 bits of a 64 bit
address for the LDS and scratch apertures. The current addresses cannot
be encoded in this register, so that addresses are changed to have the
lower 48 bits be all zeros in addition to writing the bases register.
Change-Id: If20f262b2685d248afe31aa3ebb274e4f0fc0772
The previous exit event occurs when the dispatcher sends a completion
signal for a kernel, but gem5 does some kernel-based stats updates after
the signal is sent. Therefore, if these exit events are used as a way to
dump per-kernel stats, some of the stats for the kernel that just ended
will be in the next kernel's stat dump which is misleading.
This patch moves the exit event to where the stats are updated and only
exits if the dispatcher has requested a stat dump to prevent situations
where stats are updated mid-kernel.
Change-Id: I74dc1cad5fc90382a2a80564764b3e7c9fb65521
The amdgpu driver supports fetching instructions from pages which reside
in system memory rather than device memory. This changeset adds support
to do this by adding the system hub object added in a prior changeset to
the fetch unit and issues requests to the system hub if the system bit
in the memory page's PTE is set. Otherwise, the requestor ID is set to
be device memory and the request is routed through the Ruby network /
GPU caches to fetch the instructions.
Change-Id: Ib2fb47c589fdd5e544ab6493d7dbd8f2d9d7b0e8
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/57652
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Add the page table walker, page table format, TLB, TLB coalescer, and
associated support in the AMDGPUDevice. This page table format used the
hardware format for dGPU and is very different from APU/GCN3 which use
the X86 page table format.
In order to support either format for the GPU model, a common
TranslationState called GpuTranslation state is created which holds the
combined fields of both the APU and Vega translation state. Similarly
the TlbEntry is cast at runtime by the corresponding arch files as they
are the only files which touch the internals of the TlbEntry. The GPU
model only checks if a TlbEntry is non-null and thus does not need to
cast to peek inside the data structure.
Change-Id: I4484c66239b48df5224d61caa6e968e56eea38a5
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/51848
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Remove the line "For use for simulation and test purposes only" in files
were AMD is the only copyright holder listed in the header. This happens
to be the case for all files where this line exists, removing it
completely from gem5.
Change-Id: I623f266b002f564301b28774f49081099cfc60fd
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/53943
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Move GpuTLB and TLBCoalescer to GCN3 as the TLB format is specific to
GCN3 and SE mode / APU simulation. Vega will have its own TLB,
coalescer, and walker suitable for a dGPU. This also adds a using alias
for the TLB translation state to reduce the number of references to
TheISA and X86ISA. X86 specific includes are also removed.
Change-Id: I34448bb4e5ddb9980b34a55bc717bbcea0e03db5
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/49847
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Reviewed-by: Matt Sinclair <mattdsinclair@gmail.com>
Maintainer: Matt Sinclair <mattdsinclair@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Apply the gem5 namespace to the codebase.
Some anonymous namespaces could theoretically be removed,
but since this change's main goal was to keep conflicts
at a minimum, it was decided not to modify much the
general shape of the files.
A few missing comments of the form "// namespace X" that
occurred before the newly added "} // namespace gem5"
have been added for consistency.
std out should not be included in the gem5 namespace, so
they weren't.
ProtoMessage has not been included in the gem5 namespace,
since I'm not familiar with how proto works.
Regarding the SystemC files, although they belong to gem5,
they actually perform integration between gem5 and SystemC;
therefore, it deserved its own separate namespace.
Files that are automatically generated have been included
in the gem5 namespace.
The .isa files currently are limited to a single namespace.
This limitation should be later removed to make it easier
to accomodate a better API.
Regarding the files in util, gem5:: was prepended where
suitable. Notice that this patch was tested as much as
possible given that most of these were already not
previously compiling.
Change-Id: Ia53d404ec79c46edaa98f654e23bc3b0e179fe2d
Signed-off-by: Daniel R. Carvalho <odanrc@yahoo.com.br>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/46323
Maintainer: Bobby R. Bruce <bbruce@ucdavis.edu>
Reviewed-by: Bobby R. Bruce <bbruce@ucdavis.edu>
Reviewed-by: Matthew Poremba <matthew.poremba@amd.com>
Tested-by: kokoro <noreply+kokoro@google.com>
As part of recent decisions regarding namespace
naming conventions, all namespaces will be changed
to snake case.
::Stats became ::statistics.
"statistics" was chosen over "stats" to avoid generating
conflicts with the already existing variables (there are
way too many "stats" in the codebase), which would make
this patch even more disturbing for the users.
Change-Id: If877b12d7dac356f86e3b3d941bf7558a4fd8719
Signed-off-by: Daniel R. Carvalho <odanrc@yahoo.com.br>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/45421
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
The only thing left in isa_traits.hh are two constants, one for the
number of bytes in a page, and one for how far to shift an address to
get the page number. To make it clear that this is the only thing
isa_traits.hh should be used for from this point forward (until it is
entirely eliminated), this change renames it to the much less generic
page_size.hh.
Also, because isa_traits.hh used to have *much* more stuff in it, it was
included in a lot of places it didn't need to be. This change also
clears out all these legacy includes while updating the actually needed
ones to the new name.
Change-Id: I939b01b117c53d620b6b0a98982f6f21dc2ada72
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/40179
Reviewed-by: Gabe Black <gabe.black@gmail.com>
Maintainer: Gabe Black <gabe.black@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
SimplePoolManager doesn't allow mapping of two WGs
simultaneously on the same Compute Unit (provided
the previous WG has been mapped to all the SIMDs)
even if there is sufficient VRF and SRF space
available.
DynPoolManager takes care of that by dynamically
allocating and deallocating register file space
to wavefronts
Change-Id: I2255c68d4b421615d7b231edc05d3ebb27cbd66c
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/32034
Maintainer: Matt Sinclair <mattdsinclair@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Reviewed-by: Alexandru Duțu <alexandru.dutu@amd.com>
HSA packet processor will now accept and process agent packets.
Type field in packet is command type.
For now:
AgentCmd::Nop = 0
AgentCmd::Steal = 1
Steal command steals the completion signal for a running kernel.
This enables a benchmark to use hsa primitives to send an agent
packet to steal the signal, then wait on that signal.
Minimal working example to be added in gem5-resources.
Change-Id: I37f8a4b7ea1780b471559aecbf4af1050353b0b1
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/37015
Reviewed-by: Matt Sinclair <mattdsinclair@gmail.com>
Reviewed-by: Matthew Poremba <matthew.poremba@amd.com>
Maintainer: Matt Sinclair <mattdsinclair@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
These files are nominally not tied to the X86ISA, but in reality they
are because they reach into the GPU TLB, which is defined unchangeably in
the X86ISA namespaces, and uses data structures within it. Rather than try
to pretend that these structures are generic, we'll instead just use X86ISA
instead of TheISA. If this really does become generic in the future, a
base class with the ISA agnostic essentials defined in it can be used
instead, and the ISA specific TLBs can defined their own derived class
which has whatever else they need. Really the compute unit shouldn't be
communicating with the TLB using sender state since those are supposed
to be little notes for the sender to keep with a transaction, not for
communicating between entities across a port.
Change-Id: Ie6573396f6c77a9a02194f5f4595eefa45d6d66b
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/34174
Reviewed-by: Bobby R. Bruce <bbruce@ucdavis.edu>
Maintainer: Bobby R. Bruce <bbruce@ucdavis.edu>
Tested-by: kokoro <noreply+kokoro@google.com>
The create() method on Params structs usually instantiate SimObjects
using a constructor which takes the Params struct as a parameter
somehow. There has been a lot of needless variation in how that was
done, making it annoying to pass Params down to base classes. Some of
the different forms were:
const Params &
Params &
Params *
const Params *
Params const*
This change goes through and fixes up every constructor and every
create() method to use the const Params & form. We use a reference
because the Params struct should never be null. We use const because
neither the create method nor the consuming object should modify the
record of the parameters as they came in from the config. That would
make consuming them not idempotent, and make it impossible to tell what
the actual simulation configuration was since it would change from any
user visible form (config script, config.ini, dot pdf output).
Change-Id: I77453cba52fdcfd5f4eec92dfb0bddb5a9945f31
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/35938
Reviewed-by: Gabe Black <gabeblack@google.com>
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Maintainer: Gabe Black <gabeblack@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>
isa_traits.hh used to have much more in it, but now it only has
PageShift, PageBytes, and (for now) the guest endianness. These values
should only be retrieved from the System class generally speaking, so
only the system class should include arch/isa_traits.hh.
Some gpu compute related files need PageBytes or PageShift. Even though
those files don't advertise their ISA dependence, they are tied to x86.
In those files, they can include arch/x86/isa_traits.hh.
The only other file which legitimately needs arch/isa_traits.hh is the
decoder cache since it uses PageBytes to size an array.
Change-Id: I12686368715623e3140a68a7027c136bd52567b1
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/33203
Reviewed-by: Gabe Black <gabeblack@google.com>
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Maintainer: Gabe Black <gabeblack@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>
The CU would initialize its ports in getMasterPort(), which
is not desirable as getMasterPort() may be called several
times for the same port. This can lead to a fatal if the CU
expects to only create a single port of a given type, and may
lead to other issues where stat names are duplicated.
This change instantiates and initializes the CU's ports in the
CU constructor using the CU params.
The index field is also removed from the CU's ports because the
base class already has an ID field, which will be set to the
default value in the base class's constructor for scalar ports.
It doesn't make sense for scalar port's to take an index because
they are scalar, so we let the base class initialize the ID to
the invalid port ID.
Change-Id: Id18386f5f53800a6447d968380676d8fd9bac9df
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/32836
Reviewed-by: Anthony Gutierrez <anthony.gutierrez@amd.com>
Maintainer: Anthony Gutierrez <anthony.gutierrez@amd.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Barriers were not modeled properly. Firstly, barriers were
allocated to each WG that was launched, which is not
correct, and the CU would provide an infinite number
of barrier slots. There are a limited number of barrier slots
per CU in reality. In addition, the CU will not allocate
barrier slots to WGs with a single WF (nothing to sync if
only one WF).
Beyond modeling problems, there also the issue of deadlock.
The barrier could deadlock because not all WFs are freed
from the barrier once it has been satisfied. Instead, we
relied on the scoreboard stage to release them lazily,
one-by-one.
Under this implementation the scoreboard may not fully release
all WFs participating in a barrier; this happens because the
first WF to be freed from the barrier could reach an s_barrier
instruction again, forever causing the barrier counts across
WFs to be out-of-sync.
This change refactors the barrier logic to:
1) Create a proper barrier slot implementation
2) Enforce (via a parameter) the number of barrier
slots on the CU.
3) Simplify the logic and cleanup the code (i.e., we
no longer iterate through the entire WF list each
time we check if a barrier is satisfied).
4) Fix deadlock issues.
Change-Id: If53955b54931886baaae322640a7b9da7a1595e0
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/29943
Reviewed-by: Anthony Gutierrez <anthony.gutierrez@amd.com>
Maintainer: Anthony Gutierrez <anthony.gutierrez@amd.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Kernel end release was turned on for VIPER protocol, which
is in fact write-through based and thus no need to have
release operation. This changeset splits the option
'impl_kern_boundary_sync' into 'impl_kern_launch_acq'
and 'impl_kern_end_rel', and turns off release on VIPER.
Change-Id: I5490019b6765a25bd801cc78fb7445b90eb02a3d
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/29917
Reviewed-by: Anthony Gutierrez <anthony.gutierrez@amd.com>
Reviewed-by: Xianwei Zhang <xianwei.zhang@amd.com>
Maintainer: Anthony Gutierrez <anthony.gutierrez@amd.com>
Tested-by: kokoro <noreply+kokoro@google.com>
This patch is changing the underlying type for RequestPtr from Request*
to shared_ptr<Request>. Having memory requests being managed by smart
pointers will simplify the code; it will also prevent memory leakage and
dangling pointers.
Change-Id: I7749af38a11ac8eb4d53d8df1252951e0890fde3
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/10996
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>
The Process class is full of implementation details and
structures related to SE Mode. This changeset factors out an
internal class from Process and moves it into a separate file.
The purpose behind doing this is to clean up the code and make
it a bit more modular.
Change-Id: Ic6941a1657751e8d51d5b6b1dcc04f1195884280
Reviewed-on: https://gem5-review.googlesource.com/2263
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Modifies the clone system call and adds execve system call. Requires allowing
processes to steal thread contexts from other processes in the same system
object and the ability to detach pieces of process state (such as MemState)
to allow dynamic sharing.
In general, the ThreadID parameter is unnecessary in the memory system
as the ContextID is what is used for the purposes of locks/wakeups.
Since we allocate sequential ContextIDs for each thread on MT-enabled
CPUs, ThreadID is unnecessary as the CPUs can identify the requesting
thread through sideband info (SenderState / LSQ entries) or ContextID
offset from the base ContextID for a cpu.
This is a re-spin of 20264eb after the revert (bd1c6789) and includes
some fixes of that commit.
The mmapGrowsDown() method was a static method on the OperatingSystem
class (and derived classes), which worked OK for the templated syscall
emulation methods, but made it hard to access elsewhere. This patch
moves the method to be a virtual function on the LiveProcess method,
where it can be overridden for specific platforms (for now, Alpha).
This patch also changes the value of mmapGrowsDown() from being false
by default and true only on X86Linux32 to being true by default and
false only on Alpha, which seems closer to reality (though in reality
most people use ASLR and this doesn't really matter anymore).
In the process, also got rid of the unused mmap_start field on
LiveProcess and OperatingSystem mmapGrowsUp variable.
