This simplifies the O3 CPU, and removes special cases around how vector
registers are handled. Now ARM is responsible for maintaining its
different register personalities internally.
Also, this re-establishes the invariant that registers are indexed as
complete, opaque entities with no internal structure, at least as far as
the CPU is concerned.
To make sure the KVM CPU sees the correct state, we need to sync over
the vector registers if we're in 32 bit mode when moving state to or
from gem5's ThreadContext.
Change-Id: I36416d609310ae0bc50c18809f5d9e19bfbb4d37
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/49147
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>
The event in KVM x86 SE mode plays double duty, triggering a system call
or a page fault depending on where it's called from (the system call
handler vs page fault handler).
This means we can eliminate the page fault gem5 op and the
pseudo_inst.hh switching header file.
This change touches a lot of things, but there wasn't really a good
place to split it up which still made sense and was consistent and
functional.
Change-Id: Ic414829917bcbd421893aa6c89d78273e4926b78
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/34165
Reviewed-by: Gabe Black <gabe.black@gmail.com>
Reviewed-by: Alexandru Duțu <alexandru.dutu@amd.com>
Maintainer: Gabe Black <gabe.black@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Gem5 Hardware Transactional Memory (HTM)
Here we provide a brief note describing HTM support in Gem5 at
a high level.
HTM is an architectural feature that enables speculative concurrency in
a shared-memory system; groups of instructions known as transactions are
executed as an atomic unit. The system allows that transactions be
executed concurrently but intervenes if a transaction's
atomicity/isolation is jeapordised and takes corrective action. In this
implementation, corrective active explicitely means rolling back a
thread's architectural state and reverting any memory updates to a point
just before the transaction began.
This HTM implementation relies on--
(1) A checkpointing mechanism for architectural register state.
(2) Buffering speculative memory updates.
This patch is focusing on the definition of the HTM checkpoint (1)
The checkpointing mechanism is architecture dependent. Each ISA
leveraging HTM support can define a class HTMCheckpoint inhereting from
the generic one (GenericISA::HTMCheckpoint).
Those will need to save/restore the architectural state by overriding
the virtual HTMCheckpoint::save (when starting a transaction) and
HTMCheckpoint::restore (when aborting a transaction).
Instances of this class live in O3's ThreadState and Atomic's
SimpleThread. It is up to the ISA to populate this instance when
executing an instruction that begins a new transaction.
JIRA: https://gem5.atlassian.net/browse/GEM5-587
Change-Id: Icd8d1913d23652d78fe89e930ab1e302eb52363d
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/30314
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
In most cases, the microcode ROM doesn't actually do anything. The
structural existence of a microcode ROM doesn't make sense in the
general case, and in architectures that know they have one and need to
interact with it, they can cast their decoder into an arch specific type
and access the ROM that way.
Change-Id: I25b67bfe65df1fdb84eb5bc894cfcb83da1ce64b
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/32898
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>
These don't have anything in them at the moment since making some ISA
methods virtual and not inlined will likely add overhead, specifically
the ones for flattening registers. Some code may need to be rearranged
to minimize that overhead before the ISA objects can be truly put
behind a generic interface.
Change-Id: Ie36a771e977535a7996fdff701ce202bb95c8c58
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/25007
Tested-by: kokoro <noreply+kokoro@google.com>
Maintainer: Gabe Black <gabeblack@google.com>
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
This patch adds some more functionality to the cpu model and the arch to
interface with the vector register file.
This change consists mainly of augmenting ThreadContexts and ExecContexts
with calls to get/set full vectors, underlying microarchitectural elements
or lanes. Those are meant to interface with the vector register file. All
classes that implement this interface also get an appropriate implementation.
This requires implementing the vector register file for the different
models using the VecRegContainer class.
This change set also updates the Result abstraction to contemplate the
possibility of having a vector as result.
The changes also affect how the remote_gdb connection works.
There are some (nasty) side effects, such as the need to define dummy
numPhysVecRegs parameter values for architectures that do not implement
vector extensions.
Nathanael Premillieu's work with an increasing number of fixes and
improvements of mine.
Change-Id: Iee65f4e8b03abfe1e94e6940a51b68d0977fd5bb
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
[ Fix RISCV build issues and CC reg free list initialisation ]
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/2705
The TLB-related code is generally architecture dependent and should
live in the arch directory to signify that.
--HG--
rename : src/sim/BaseTLB.py => src/arch/generic/BaseTLB.py
rename : src/sim/tlb.cc => src/arch/generic/tlb.cc
rename : src/sim/tlb.hh => src/arch/generic/tlb.hh
This patch adds methods in KvmCPU model to handle KVM exits caused by syscall
instructions and page faults. These types of exits will be encountered if
KvmCPU is run in SE mode.
In order to support m5ops on virtualized CPUs, we need to either
intercept hypercall instructions or provide a memory mapped m5ops
interface. Since KVM does not normally pass the results of hypercalls
to userspace, which makes that method unfeasible. This changeset
introduces support for m5ops using memory mapped mmapped IPRs. This is
implemented by adding a class of "generic" IPRs which are handled by
architecture-independent code. Such IPRs always have bit 63 set and
are handled by handleGenericIprRead() and
handleGenericIprWrite(). Platform specific impementations of
handleIprRead and handleIprWrite should use
GenericISA::isGenericIprAccess to determine if an IPR address should
be handled by the generic code instead of the architecture-specific
code. Platforms that don't need their own IPR support can reuse
GenericISA::handleIprRead() and GenericISA::handleIprWrite().
This patch makes it possible to once again build gem5 without any
ISA. The main purpose is to enable work around the interconnect and
memory system without having to build any CPU models or device models.
The regress script is updated to include the NULL ISA target. Currently
no regressions make use of it, but all the testers could (and perhaps
should) transition to it.
--HG--
rename : build_opts/NOISA => build_opts/NULL
rename : src/arch/noisa/SConsopts => src/arch/null/SConsopts
rename : src/arch/noisa/cpu_dummy.hh => src/arch/null/cpu_dummy.hh
rename : src/cpu/intr_control.cc => src/cpu/intr_control_noisa.cc
This will allow it to be specialized by the ISAs. The existing caching scheme
is provided by the BasicDecodeCache in the GenericISA namespace and is built
from the generalized components.
--HG--
rename : src/cpu/decode_cache.cc => src/arch/generic/decode_cache.cc
