Add initrd_filename and initrd_addr parameters to specify that an
initrd/initramfs should be loaded into memory from a file, just like the
DTB blob. The user must specify the initrd file, and they can specify
the initrd load address as well. However, in practice, it's expected
that the dev/machine backend will derive the initrd load address from
the dtb load address, which is how a bootloader would typically do it.
Change-Id: I6378927c2984b7ccdd1471486dd7803500ef5883
Signed-off-by: Alistair Delva <adelva@google.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/54184
Reviewed-by: Richard Cooper <richard.cooper@arm.com>
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Add a new API function, addBootData(), which allows the ports to specify
the size and load address of the initrd/initramfs via DeviceTree. This
uses the standard chosen nodes for initrd-start/initrd-end.
Update the addBootCmdline() to call addBootData() with no
initrd/initramfs so as to maintain backwards compatibility.
Change-Id: I7b1d5cf2a0b18685eaadf1d881434f3d48c45d8b
Signed-off-by: Alistair Delva <adelva@google.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/54183
Reviewed-by: Richard Cooper <richard.cooper@arm.com>
Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>
There are many SE mode system calls that are implemented
in src/sim/syscall_emul.cc or src/sim/syscall_emul.hh.
And they work well under X86 and ARM platforms. However,
they are not supported in se_workload.cc under the RISC-V
platform. This patch adds support for all the system calls
already implemented in syscall_emul.hh/cc to the RISC-V
platform (in arch/riscv/linux/se_workload.cc).
Change-Id: Ia47c3c113767b50412b1c8ade3c1047c894376cf
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/54803
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Bobby Bruce <bbruce@ucdavis.edu>
Three changes below:
1. The m_stall_time was declared as statistics::Average, but
statistics::Average uses AvgStor as storage and this works as per-tick
average stat. In the case of m_stall_time, Scalar should be used to get
the calculation right.
2. The function used to get an enqueue time was changed since the
getTime() returns the time when the message was created.
3. Record the stall time only when the message is really dequeued
from the buffer (stall time is not evaluated when the message is moved
to stall map).
Change-Id: I090d19828b5c43f0843a8b735d3f00f312c436e9
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/54363
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
The `get_simstat` function in `src/python/m5/stats/gem5stats.py` was
returning an error when a non-Root Simobject was passed:
```
AttributeError: object 'PyTrafficGen' has no attribute 'name'
At:
build/NULL_MESI_Two_Level/python/m5/SimObject.py(1430): __getattr__
build/NULL_MESI_Two_Level/python/m5/stats/gem5stats.py(279): get_simstat
```
The issue was an assumption that SimObjects have a field `name`. They
do not. To get a SimObject's name the `get_name()` function must be
used. This patch fixes this issue.
In addition to this fix, the documentation in this function has been
improved to state more clearly what can be passed and what shall be
returned. Previously it was somewhat unclear.
Change-Id: I33538120015280bb6260ccf8eba6b75ff43d280e
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/54943
Reviewed-by: Bobby Bruce <bbruce@ucdavis.edu>
Maintainer: Bobby Bruce <bbruce@ucdavis.edu>
Tested-by: kokoro <noreply+kokoro@google.com>
As noted here: https://gem5.atlassian.net/browse/GEM5-1133,
NVMInterface.py does not have a `controller()` function, which is used
by `configs/common/MemConfig.py` to obtain a memory controller for a
specific memory type selected. This patch adds a `controller()`
function to `NVNInterface.py` to avoid the reported error.
It should be noted that we do not enforce a rule that a memory type
must include a `controller()` function. `se.py`, and other scrips
that use `configs/common/MemConfigs.py`, should not rely on this
false assumption.
Change-Id: Ieba62f803d3b9f9c5c3c863d5a8c4ca16c5e5e82
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/54923
Reviewed-by: Bobby Bruce <bbruce@ucdavis.edu>
Maintainer: Bobby Bruce <bbruce@ucdavis.edu>
Tested-by: kokoro <noreply+kokoro@google.com>
There is currently a "--gold-linker" option, which tells SCons to use
the gold linker. This puts the gold linker in a special position where
it has its own command line option, and makes it impossible to
explicitly select any other linker.
This change adds a --linker option which can be set to "bfd" (the
default gnu linker), "gold" (the gnu gold linker), or "lld" which is the
clang linker. If none is specified, SCons will let the compiler fall
back to whatever its default is.
The --gold-linker option is modified so that it just sets the --linker
option for you. Because of how SCons handles adding command line
options, there isn't a good way to complain if both it and --linker is
used, nor is there a good way to warn that the user is using a
deprecated command line option. A warning is in the help text for that
option now, though.
If the gold linker is selected, this change also sets the --threads
option, and sets the --thread-count option. This tells the gold linker
to run multi-threaded to speed up linking. Apparently the gold linker
must have been built with an option that enables threading for these
options to have any effect. If threads and LTO are both enabled, the
gold linker segfaults. To avoid that problem, we don't add --threads if
LTO has been enabled.
This change also enables a new configuration, where lld, the clang
linker, can be used with gcc. Unfortunately the format of LTO
information gcc/g++ generates is not compatible with lld, and so if you
set the linker to lld and enable LTO, you'll probably get errors like
not being able to find the symbol "main".
This change also allows you to select the default gnu linker ("bfd")
when using clang, although it's not clear why you would want to do that.
Change-Id: Ib37030431527f5d0bc626e9594b2e1142df889be
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/49003
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Maintainer: Gabe Black <gabe.black@gmail.com>
rocBLAS builds for all targets by default, but it requires we set the
HCC_AMDGPU_TARGET env variable to all the targets we want to build for.
This change explicitly sets all the gfx versions we intend to support in
gem5, and removes the extraneous "-a all" from the install command.
Additionally, doing this allowed for DNNMark to run on gfx902.
Change-Id: Id1a00433beaa23f6935c12073d5bddc38431886b
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/54623
Reviewed-by: Matt Sinclair <mattdsinclair@gmail.com>
Maintainer: Matt Sinclair <mattdsinclair@gmail.com>
Reviewed-by: Matthew Poremba <matthew.poremba@amd.com>
Tested-by: kokoro <noreply+kokoro@google.com>
This resource has been deprecated in favor of 'x86-ubuntu-18.04-img'. In
practise, these are the same resource (i.e., the same disk image), but
we deprecate 'x86-ubuntu-img' as 'x86-ubuntu-18.04-img' is more explicit
on what the disk image contains. Going forward we may want different
disk image resources with different Ubuntu versions, and we want it to
be clear what the user is retrieving.
Change-Id: I06b08e6b65cf431067ffda35ebd10d419068d073
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/54583
Reviewed-by: Bobby Bruce <bbruce@ucdavis.edu>
Maintainer: Bobby Bruce <bbruce@ucdavis.edu>
Tested-by: kokoro <noreply+kokoro@google.com>
The 'resources.json' file in gem5 resources is used to lookup resources.
The stdlib resource downloader was hardcoded to the 'resources.json'
stored in the gem5 resources stable branch. This change allows the gem5
downloader to obtain the specific resources.json.
Change-Id: Ie119ed9326b359055bf5bc347ca89336a5cc2e5d
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/54466
Maintainer: Bobby Bruce <bbruce@ucdavis.edu>
Reviewed-by: Bobby Bruce <bbruce@ucdavis.edu>
Tested-by: kokoro <noreply+kokoro@google.com>
When checking whether a given option is supported, we try to compile or
link a small test program and see if that succeeded or not. There are
some options which are not really supported, but if you use them the
compiler might produce an error instead of failing to build. An example
of that is clang (version 9 at least) which will warn if you try to
disabled a warning it doesn't know about.
On the develop branch, this is fine since we have werror enabled, and
even these warnings will prevent the options from being enabled. On the
release branches where we disable werror for better future
compatibility, this causes a problem because these options still pass
the test and end up being enabled. This doesn't break the build, but
can cause a bunch of annoying and unnecessary warnings which clutter
up the build output.
To remove this inconsistency, we can enable werror just for the test
compiles or links which decide whether or not an option is supported.
That won't necessarily differentiate *why* a warning was generated, so
if through some strange combination of circumstances something else
causes a warning pervasively through the build, then this may think
an option is to blame and not enable it even though it's fine. This
seems unlikely though, and not worth worrying about without a specific
example showing that it can/will actually happen.
Change-Id: I6a1e3273c0b646a5636dc9986c70dcd5332f6f64
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/54624
Maintainer: Gabe Black <gabeblack@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Bobby Bruce <bbruce@ucdavis.edu>
GCN3_X86 and VEGA_X86 can use the same test binaries to run tests for
that build configuration. This adds an option to the nightly and weekly
test scripts to select which GPU ISA to test. By default the GCN3_X86
ISA is tested which was previously the only test. No behavior is changed
from current testing.
Change-Id: Ifedcdea5d7c1c8e9994559a20aea5e1954180772
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/54083
Reviewed-by: Matt Sinclair <mattdsinclair@gmail.com>
Maintainer: Matt Sinclair <mattdsinclair@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Because the python environment may already be up and running by the time
static initializers are run, specifically when gem5 is built as a
library and loaded with dlopen, we can't rely on all of the objects
declaring python initialization callbacks having been constructed by the
time the code which would execute them runs.
To address that problem, this change keeps track of whether the
initialization has already happened when a callback is installed, and if
so, runs the callback immediately.
The original implementation also had users install callbacks by
overriding a virtual function in the PythonInitFunc class, and then
statically allocating an instance of that subclass so its constructor
would be called at initialization time. Calling the function manually if
initialization has already happened won't work in that case, because you
can't call a virtual function from a constructor and get the behavior
you'd want.
Instead, this change makes the PythonInitFunc wrap the actual callback
which is outside of the structure itself. Because the callback is not a
virtual function of PythonInitFunc, we can call it in the constructor
without issue.
Also, the Callback type has to be a bare function pointer and not a
std::function<...> because the argument it takes is a pybind11::module_
reference. Pybind11 sets the visibility of all of its code to hidden to
improve binary size, but unfortunately that causes problems when
accepting one as an argument in a publically accessible lambda in g++.
clang doesn't raise a warning, but g++ does which breaks the build. We
could potentially disable this warning, but accepting a function pointer
instead works just as well, since captureless lambdas can be trivially
converted into function pointers, and they don't seem to upset g++.
Change-Id: I3fb321b577090df67c7be3be0e677c2c2055d446
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/54325
Maintainer: Gabe Black <gabe.black@gmail.com>
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
The systemc testing framework is not used regularly, and had bit rot and
stopped working. This change updates it so that it runs again, and all
previously passing tests pass again.
These changes were mostly in the related SConscript now that top level
targets are built a little differently and that the gem5 shared library
is no longer stored in a special construction environment variable.
verify.py also needed to be updated since warn() and info() lines now
have file and line number information in them, throwing off pre diff
filtering of gem5 outputs.
Change-Id: Ifdcbd92eab8b9b2168c449bfbcebf52dbe1f016a
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/54324
Maintainer: Gabe Black <gabe.black@gmail.com>
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
pybind11 gives us a simple way to set up sys.argv when initializing the
python interpreter, but we need to set that up even if the python
interpreter is already running. We need to do that manually, which we do
like gem5's main() used to.
Change-Id: If9b79a80e05158226d13f68bf06a2a98a36c2602
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/54310
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
The previous incarnation of this support used faults to make the CPU
reexecute the system call instruction again and again to prevent
emulating/passing through blocking system calls from blocking gem5 as
a whole. That support was accidentally removed a while ago. This new
version suspends the thread context executing the system call, and
periodically wakes it up to retry using a periodically scheduled event.
Jira Issue: https://gem5.atlassian.net/browse/GEM5-1123
Change-Id: I155fa8205d7ea45e3d102216aeca6ee1979a522f
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/54205
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Rather than make each ISA include boilerplate to ignore a
SyscallReturn's value when it's marked as suppressed or needing a retry,
put that code into the SyscallDesc::doSyscall method instead.
That has two benefits. First, it removes a decent amount of code
duplication which is nice from a maintenance perspective. Second, it
puts the SyscallDesc in charge of figuring out what to do once a system
call implementation finishes. That will let it schedule a retry of the
system call for instance, without worrying about what the ISA is doing
with the SyscallReturn behind its back.
Jira Issue: https://gem5.atlassian.net/browse/GEM5-1123
Change-Id: I76760cba75fd23e6e3357f6169c0140bee3f01b6
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/54204
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>
