Apply the gem5 namespace to the codebase.
Some anonymous namespaces could theoretically be removed,
but since this change's main goal was to keep conflicts
at a minimum, it was decided not to modify much the
general shape of the files.
A few missing comments of the form "// namespace X" that
occurred before the newly added "} // namespace gem5"
have been added for consistency.
std out should not be included in the gem5 namespace, so
they weren't.
ProtoMessage has not been included in the gem5 namespace,
since I'm not familiar with how proto works.
Regarding the SystemC files, although they belong to gem5,
they actually perform integration between gem5 and SystemC;
therefore, it deserved its own separate namespace.
Files that are automatically generated have been included
in the gem5 namespace.
The .isa files currently are limited to a single namespace.
This limitation should be later removed to make it easier
to accomodate a better API.
Regarding the files in util, gem5:: was prepended where
suitable. Notice that this patch was tested as much as
possible given that most of these were already not
previously compiling.
Change-Id: Ia53d404ec79c46edaa98f654e23bc3b0e179fe2d
Signed-off-by: Daniel R. Carvalho <odanrc@yahoo.com.br>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/46323
Maintainer: Bobby R. Bruce <bbruce@ucdavis.edu>
Reviewed-by: Bobby R. Bruce <bbruce@ucdavis.edu>
Reviewed-by: Matthew Poremba <matthew.poremba@amd.com>
Tested-by: kokoro <noreply+kokoro@google.com>
In python, the BARs had been configured using three arrays and a scalar
parameter. The arrays tracked the BAR value in the config, whether the
BAR was for a "legacy" IO range, and the size of the BAR, and the
scalar parameter was an offset for the "legacy" IO addresses to map
into the host physical address space. The nature of a BAR was implied
by its raw config space value, with each of the control bits (IO vs.
memory, 64 bit, reserved bits) encoded directly in the value.
Now, the BARs are represented by objects which have different types
depending on what type of BAR they are. There's one for IO, one for
memory, one for the upper 32 bits of a 64 bit BAR (so indices work
out), and one for legacy IO ranges. Each type has parameters which
are appropriate for it, and they're parameters are all grouped together
as a unit instead of being spread across all the previous values.
The legacy IO offset has been removed, since these addresses can be
offset like any other IO address. They can be represented naturally
in the config using their typical IO port numbers, and still be turned
into an address that gem5 will handle correctly in the back end.
Unfortunately, this exposes a problem in the config system where
a VectorParam can't be overwritten successfully one element at a time,
at least when dealing with SimObject classes. It might work with
actual SimObjects in a config, but I haven't tried it. If you were
to do that to, for instance, update the BARs for x86 so that they
used legacy IO ports for the IDE controller, it would complain that
you were trying to instantiate orphaned nodes. Replacing the whole
VectorParam with a new list of BAR objects seems to work, so that's
what's implemented in this change.
On the C++ side, BARs in the config space are treated as flat values
on reads, and are stored in the config structure associated with each
PCI device. On writes, the value is first passed to the BAR object,
and it has a chance to mask any bits which are fixed in hardware and
update its idea of what range it corresponds to in memory.
When sending AddrRanges up to the parent bus to set up routing, the
BARs generate each AddrRange if and only if their type has been
enabled in the config space command register. The BAR object which
represents the upper 32 bits of a 64 bit BAR does not claim to be
IO or memory, and so doesn't contribute a range. It communicates with
the BAR which represents the lower 32 bits, so that that BAR has the
whole base address.
Since the IO or memory BAR enable bits in the command register are now
handled by the PCI device base class, the IDE controller no longer has
to handle that manually. It does still need to keep track of whether
the bus master functionality has been enabled though, which it can
check when those registers are accessed.
There was already a mechanism for decoding addresses based on BARs
in the PCI device base class, but it was overly complicated and not
used consistently across devices. It's been consolidated, and used in
most places where it makes sense.
Finally, a few unnecessary values have been dropped from the base PCI
device's and IDE controller's checkpoint output. These were just local
copies of information already in the BARs, which in turn are already
stored along with the data in the device's config space.
Change-Id: I16d5f8cdf86d7a2d02a6b04d1f9e1b3eb1dd189d
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/35516
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Gabe Black <gabeblack@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>
The create() method on Params structs usually instantiate SimObjects
using a constructor which takes the Params struct as a parameter
somehow. There has been a lot of needless variation in how that was
done, making it annoying to pass Params down to base classes. Some of
the different forms were:
const Params &
Params &
Params *
const Params *
Params const*
This change goes through and fixes up every constructor and every
create() method to use the const Params & form. We use a reference
because the Params struct should never be null. We use const because
neither the create method nor the consuming object should modify the
record of the parameters as they came in from the config. That would
make consuming them not idempotent, and make it impossible to tell what
the actual simulation configuration was since it would change from any
user visible form (config script, config.ini, dot pdf output).
Change-Id: I77453cba52fdcfd5f4eec92dfb0bddb5a9945f31
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/35938
Reviewed-by: Gabe Black <gabeblack@google.com>
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Maintainer: Gabe Black <gabeblack@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>
During PCI setup, this patch checks if a Base Address Register (BAR) is
used as a large BAR (64 bits rather than 32), and return proper address
range. The order which updates are done is decided by kernel, so this
patch implements both cases (writing lower or upper bits first).
Bit 2 in a BAR indicates a 64-bit decoder (10X to be more exact, 11X is
reserved).
The addresses in BARAddrs are full addresses and are set to zero for BAR
providing upper 32 bits to avoid conflicts in addr ranges reported.
Change-Id: I93303d36ac83dab9ed6837c81e77c9dfb778f409
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/22082
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Generally speaking, the endianness of the data devices provide or
accept is dependent on the device and not the ISA the system
executes. This change makes the devices in dev pick an endianness
rather than using the guest's.
For the ISA bus and the UART, accesses are byte sized and so endianness
doesn't matter. The ISA and PCI busses and the devices which use them
are defined to be little endian.
Change-Id: Ib0aa70f192e1d6f3b886d9f3ad41ae03bddb583f
Reviewed-on: https://gem5-review.googlesource.com/c/13462
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
These files aren't a collection of miscellaneous stuff, they're the
definition of the Logger interface, and a few utility macros for
calling into that interface (panic, warn, etc.).
Change-Id: I84267ac3f45896a83c0ef027f8f19c5e9a5667d1
Reviewed-on: https://gem5-review.googlesource.com/6226
Reviewed-by: Brandon Potter <Brandon.Potter@amd.com>
Maintainer: Gabe Black <gabeblack@google.com>
Move pcidev.(hh|cc) to src/dev/pci/device.(hh|cc) and update existing
devices to use the new header location. This also renames the PCIDEV
debug flag to have a capitalization that is consistent with the PCI
host and other devices.
--HG--
rename : src/dev/Pci.py => src/dev/pci/PciDevice.py
rename : src/dev/pcidev.cc => src/dev/pci/device.cc
rename : src/dev/pcidev.hh => src/dev/pci/device.hh
rename : src/dev/pcireg.h => src/dev/pci/pcireg.h
