This function causes problems with gcc 5 which incorrectly complains
about the call to warn_if inside a constexpr function. That should only
be an error if a call to a non-constexpr is unavoidable, and even then
the compiler isn't required to emit a diagnostic.
Rather than drop the warning, or add ifdefs to deal with these defective
versions of gcc, this change eliminates the power() function entirely.
Most inputs to this function would overflow anyway, which is reportedly
why no integer version of an exponentiation function is defined in the
standard library, and all uses of this function can easily and more
efficiently be replaced by simple left and right shifts.
Finally, by eliminating the power() function, we also remove the
dependence on base/logging.hh.
Change-Id: I4d014163883d12db46da4ee752696c8225534ee8
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/42504
Reviewed-by: Gabe Black <gabe.black@gmail.com>
Maintainer: Gabe Black <gabe.black@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
The existing sext function is a bit of a misnomer since it doesn't
actually sign extend its input, it just extends the sign if the sign bit
was zero.
This change adds a new szext function which truly sign extends the
value, although with a tiny amount of additional overhead.
Change-Id: I562ce479b771be8a3319934aeff55e797126a146
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/42384
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Maintainer: Gabe Black <gabe.black@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
This function is not used anywhere.
In addition, gethostname uses a fixed host name, and
sethostname is not implemented (sim/syscall_emul). If
we were to handle sethostname too it would require a
special conjoint implementation anyway.
Change-Id: I20919a49b123a6a49582d9cfacf1fd167cb44776
Signed-off-by: Daniel R. Carvalho <odanrc@yahoo.com.br>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/41394
Reviewed-by: Bobby R. Bruce <bbruce@ucdavis.edu>
Maintainer: Bobby R. Bruce <bbruce@ucdavis.edu>
Tested-by: kokoro <noreply+kokoro@google.com>
Previously converting scientific numbers to non-floating
numbers would yield incorrect results, because the
underlying conversion was using stoll and stoull, which
do not deal with scientific numbers properly. Therefore,
converting to_number("8.234e+08", val) would yield
val=8, which is blatantly wrong (expected 823400000).
This was fixed by searching for "e" within the string to
be converted.
To make sure all double and scientific number conversions
are correct, a few extra tests were added.
Change-Id: I6a9599d8473909d274326b6f8c268e3603044ab4
Signed-off-by: Daniel R. Carvalho <odanrc@yahoo.com.br>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/38775
Reviewed-by: Bobby R. Bruce <bbruce@ucdavis.edu>
Maintainer: Bobby R. Bruce <bbruce@ucdavis.edu>
Tested-by: kokoro <noreply+kokoro@google.com>
The operators it seems to need are ones which modify the BitUnion being
operated on, vs ones which just use it to produce a new value. The later
kind can be handled by converting the BitUnion into its underlying type
and then applying the built in operators.
Change-Id: I8aa08bf74d8ad88f4dfbb0031610c52ad412d03b
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/41515
Reviewed-by: Gabe Black <gabe.black@gmail.com>
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Maintainer: Gabe Black <gabe.black@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
This commit adds an option to add SI and its derived units to stats.
Units are now the third parameter of every Stat class constructor.
The following are convenient macros that could be used to add units
to stats,
* UNIT_CYCLE: represents clock cycles.
* UNIT_TICK: represents the count of gem5's Tick.
* UNIT_SECOND: represents the base unit of time defined by SI.
* UNIT_BIT: represents the number of computer bits.
* UNIT_BYTE: represents 8 bits.
* UNIT_VOLT: a SI derived unit measuring potential difference.
* UNIT_JOULE: represents joule, a unit of energy, as defined by SI.
* UNIT_WATT: represents 1 watt, where 1 watt = 1 joule / second.
* UNIT_CELSIUS: represents 1 Celsius degree as defined by SI.
* UNIT_RATE(T1, T2): represents the unit of a quantity of T1 divided
by a quantity of T2.
* UNIT_RATIO: represents the unit of a quantity of unit T divided by
a quantity of unit T.
* UNIT_UNSPECIFIED: the unit of the stat is unspecified. This type of
unit is mainly for backward compatibility. Newly
introduced stats should have the units specified.
This commit also alters the behavior of the ADD_STAT macro.
Specifically, ADD_STAT syntax is unchanged, but the unit of the stat
is hardcoded to be UNIT_UNSPECIFIED.
JIRA link: https://gem5.atlassian.net/browse/GEM5-849
This change is an effort towards supporting new stats schema:
https://github.com/gem5/stats-schema
Change-Id: I791704a6c4d9e06332797dbfc5eb611cb43f4710
Signed-off-by: Hoa Nguyen <hoanguyen@ucdavis.edu>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/38855
Tested-by: kokoro <noreply+kokoro@google.com>
Maintainer: Bobby R. Bruce <bbruce@ucdavis.edu>
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
This test expects to load a symbol file using the load method of gem5's
SymbolTable class, and then to search through it for a given symbol or
address.
Unfortunately, the type of file it expects to load has a format where
each line is of the form:
0x00000000, symbol_name
where the numerical part is the address of the symbol, and the part
after the comma is the symbol name. I have not been able to find any
tool which outputs a symbol file in this format, or any tool for
inspecting an existing object file which will output symbols in this
format. I looked at objdump, objcopy, nm, and the map file format output
by gnu's linker. nm has 3 different output formats, none of which match.
Usually when working with ELF files, one would just generate a new ELF
file which only had debugging information like the symbol table, and
then strip the symbols out of the original.
Since this file format seems to have been invented from thin air, there
isn't really a good way to generate a canonical file to test the loading
code against, nor is being able to load this obscure format likely to be
useful to anybody. If someone *did* want to load an external symbol
table, they would use the ELF loader and not this.
This CL deletes both this test, and the loading code in SymbolTable.
Change-Id: I20402e3f35e54d1e186a92d9c83d1c06ec86bf7d
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/40620
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Maintainer: Bobby R. Bruce <bbruce@ucdavis.edu>
Tested-by: kokoro <noreply+kokoro@google.com>
Although they provide the exact same behavior, the params
created in the tests did not have the type expected by the
internal safe cast.
The following error was triggered:
storage.test.debug: build/NULL/base/cast.hh:47: T safe_cast(U)
[with T = const Stats::SampleStor::Params*;
U = const Stats::StorageParams*]:
Assertion `ret' failed.
Change-Id: I4f2ba51f3ccdb44589e61f235997245e7d9bf3c9
Signed-off-by: Daniel R. Carvalho <odanrc@yahoo.com.br>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/40555
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Bobby R. Bruce <bbruce@ucdavis.edu>
Maintainer: Bobby R. Bruce <bbruce@ucdavis.edu>
This "UnitTest" was really not a unit test, it was a timing utility for
measuring the performance of gem5's cprintf implementation. The name was
misleading, but more than that, it was linked against all of gem5 which
created a approximately 1.5 gigabyte binary for what is a very small
program.
Instead, the new version of cprintftime, which has the same
functionality as the old version, weighs in at a svelte 500k with debug
information.
This also trims down the number of misleading "UnitTest" entries to 3,
getting us closer to the point where we can eliminate that type of
entity entirely.
Change-Id: Id30d094f2844e948fe67e820c89412f8667aaa52
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/40617
Maintainer: Gabe Black <gabe.black@gmail.com>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Create unit tests for the stats storage types. As a side effect
storage-related classes have been moved to separate files.
HistStor's grow_up, grow_out, and grow_convert have been made
private and renamed to comply with gem5's naming convention
and make grow_convert match its grow_up counterpart (growDown)
which is more suitable for its expected behavior.
The params declarations have been moved to be close to their
storage class' constructor.
HistStor has a explicit condition stating that there must be
at least 2 buckets.
Added documentation!
Fixed grow_convert so that it yields consistent histograms.
Previously buckets could not fully intersect, so doubling their
bucket size would make them steal contents innaproprietly. For
example, the neighbors [-6,-2[, [-2,2[, [2,6[, when doubled,
become [-12,-4[, [-4,4[, [4,12[; however, since the individual
values are not stored, it is impossible to know how to populate
the middle bucket with its neighbor's partial contents.
This fix forces the middle bucket of a storage to have its lower
bound at 0, solving the partial intersection issue.
Change-Id: Idb063e3dbda3cce3a8969e347660143162146eb9
Signed-off-by: Daniel R. Carvalho <odanrc@yahoo.com.br>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/25425
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Debug flags are flags that aid with debugging by printing
relevant information when enabled. Debug-formatting flags
define how the debug flags will print the information.
Although a viability, this patch does not support declaring
compound format flags.
As a side effect, now debug flags and debug-formatting flags
are printed in different lists, when using --debug-help.
Change-Id: Ieae68745276218cf4e9c1d37d7bf3bd1f19709ae
Signed-off-by: Daniel R. Carvalho <odanrc@yahoo.com.br>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/39076
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
The base/refcnt.hh header was not used in base/types.hh at all, and
enum/ByteOrder.hh was there just so other files could find it. Instead,
this change moves enum/Byteorder.hh to sim/byteswap.hh where it's fits
with the purpose of the header.
This change also fixes some style problems with the code in
base/types.hh itself.
Change-Id: I471ae5cb2cca9169ba8616fb8411b40108a3ffb2
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/39855
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Maintainer: Gabe Black <gabe.black@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
This was checking that the breakpoint length was equal to the length of
the ISA specific MachInst type. Instead, force the ISA specific remote
GDB subclass to implement a check if it wants to, specific to its needs.
The base implementation will just approve of any length, which should be
fine with a well behaved GDB client.
Change-Id: Id7325b788f8445049855f8104082b8e4da1fe300
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/39661
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Reviewed-by: Bobby R. Bruce <bbruce@ucdavis.edu>
Maintainer: Bobby R. Bruce <bbruce@ucdavis.edu>
Tested-by: kokoro <noreply+kokoro@google.com>
This was mostly not used to begin with, but also when it was used, it
would obscure places where there were types, functions, etc, which were
switched between ISAs at compile time, and which would need to be
cleaned up to allow more than one ISA at a time.
Change-Id: Ieb372feff91b7e946b477fb78e54bcd0c2138966
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/39655
Reviewed-by: Bobby R. Bruce <bbruce@ucdavis.edu>
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Maintainer: Bobby R. Bruce <bbruce@ucdavis.edu>
Tested-by: kokoro <noreply+kokoro@google.com>
As the std namespace expands, it becomes more and more likely that
blanketly importing all its symbols will cause a collision. Also, when
it was imported, the std:: was used or left off arbitrarily, sometimes
inconsistently even in the same function signature.
Change-Id: Ie30cbab154b00c60433908a206c229230d2b109f
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/39536
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Gabe Black <gabe.black@gmail.com>
Maintainer: Gabe Black <gabe.black@gmail.com>
The warning happens when a key is present in the checkpoint but not in the
values that gem5 source code knows about.
To do this, we must expose iteration over IniFile section keys. To not
have to make those classes public, a visitor method is implemented.
Change-Id: I23340a953f3e604642b97690a7328b10fdd740a8
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/37575
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Maintainer: Bobby R. Bruce <bbruce@ucdavis.edu>
Tested-by: kokoro <noreply+kokoro@google.com>
The second argument in the std::max call is treated as an unsigned value
as all variables are unsigned as well. This will result in an
unsigned underflow, and as such the std::max is a no-op and will result
in the underflowed value.
The `start` and `used` value get corrupted after that, and checks for
`empty` and other stuff downstream break.
Change-Id: I00017e22ba84e65f6b1c596f47d348f342fbc304
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/39496
Reviewed-by: Gabe Black <gabe.black@gmail.com>
Maintainer: Gabe Black <gabe.black@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Comparing arrays with memcmp is fairly easy to do and will correctly
identify when a value is incorrect, but gtest doesn't know what
comparison actually happened and can't print any diagnostic information
to help the person running the test determine what went wrong.
Unfortunately, gtest is also slightly too smart and also not smart
enough to make it easy to compare the contents of sub-arrays with each
other. The thing you're checking the value of *must* be an array with a
well defined size (not a pointer), and the size *must* exactly match the
number of elements it expects to find.
One fairly clean way to get around this problem would be to use the new
std::span type introduced in c++20 which lets you refer to a sub-section
of another container in place, adjusting indexing, sizing, etc as
needed. Unfortunately since we only require up to c++-14 currently we
can't use that type.
Instead, we can create vectors which hold copies of the required data.
This is suboptimal since it means we're copying around data which
doesn't really need to be copied, but it means that the templates in
gtest will get a type they can handle, and the sizes will match like it
expects them to. Since the number of checks/copies is still small, the
overhead should be trivial in practice.
A helper function, subArr, has been added to help keep things fairly
clutter free.
Change-Id: I9f88c583a6a742346b177dba7cae791824b65942
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/38895
Maintainer: Gabe Black <gabe.black@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
The functions isSet(), noneSet(), and allSet() assume that
all bits of the underlying container have a corresponding
flag. This is typically not true, and the likelihood of
incorrectly using these functions is high.
Fortunately these functions are not being used anywhere,
and can be safely removed.
Alternatively, a mask could be provided on construction to
determine which bits of the underlying container correspond
to a flag bit, so that the proper bits are checked in these
functions.
Change-Id: Ia7cbfd0726943506a3f04dc417e67a0b57cdbf95
Signed-off-by: Daniel R. Carvalho <odanrc@yahoo.com.br>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/38736
Maintainer: Bobby R. Bruce <bbruce@ucdavis.edu>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Reviewed-by: Bobby R. Bruce <bbruce@ucdavis.edu>
