The TARGET_ISA variable would let you select one ISA from a list of
possible ISAs. That has now been replaced with USE_ARM_ISA, USE_X86_ISA,
etc, variables which are boolean on or off. That will allow any number
of ISAs to be enabled or disabled individually. Enabling something other
than exactly one of these will probably prevent you from getting a
working gem5 binary, but those problems are being addressed in other,
parallel change series.
I decided to use the USE_ prefix since it was consistent with most other
on/off variables we have in gem5. One noteable exception is the
BUILD_GPU setting which, you could convincingly argue, is a better
prefix than USE_. Another option would be to use CONFIG_, in
anticipation of using a kconfig style config mechanism in gem5.
It seemed premature to start using a CONFIG_ prefix here, and if we
decide to switch to some other prefix like BUILD_, it should be a
purposeful choice and not something somebody just starts using.
Change-Id: I90fef2835aa4712782e6c1313fbf564d0ed45538
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/52491
Tested-by: kokoro <noreply+kokoro@google.com>
Maintainer: Gabe Black <gabe.black@gmail.com>
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
This makes what are configuration and what are internal SCons variables
explicit and separate, and makes it unnecessary to call out what
variables to export to C++.
These variables will also be plumbed into and out of kconfiglib in later
changes.
Change-Id: Iaf5e098d7404af06285c421dbdf8ef4171b3f001
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/56892
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Gabe Black <gabe.black@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
The x86 KVM CPU had been in the cpu/kvm directory, while the arm CPU was
inconsistently in the arch/arm directory.
This change moves the x86 CPU to be in arch/x86, restoring consistency.
This location will make the KVM support more modular, by not having the
x86 CPU implementation right alongside the generic implementation.
Change-Id: Ia13151f843df8f8877bfef5ff620825877d3dffa
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/52085
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Gabe Black <gabe.black@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Use SConsopts files local to individual domains to pull
non-foundational build code out of SConstruct. This greatly simplifies
SConstruct, and also makes it easier to find build configuration having
to do with particular pieces of gem5.
This change also converts some python level variables, all_protocols,
protocol_dirs, and slicc_includes, into the environment where the timing
of their initialization is more flexible.
Change-Id: Ie61ceb75ae9e5557cc400603c972a9582e99c1ea
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/40872
Maintainer: Gabe Black <gabe.black@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Gabe Black <gabe.black@gmail.com>
This changeset adds a GIC implementation that uses the kernel's
built-in support for simulating the interrupt controller. Since there
is currently no support for state transfer between gem5 and the
kernel, the device model does not support serialization and CPU
switching (which would require switching to a gem5-simulated GIC).
This changeset moves the ARM-specific KVM CPU implementation to
arch/arm/kvm/. This change is expected to keep the source tree
somewhat cleaner as we start adding support for ARMv8 and KVM
in-kernel interrupt controller simulation.
--HG--
rename : src/cpu/kvm/ArmKvmCPU.py => src/arch/arm/kvm/ArmKvmCPU.py
rename : src/cpu/kvm/arm_cpu.cc => src/arch/arm/kvm/arm_cpu.cc
rename : src/cpu/kvm/arm_cpu.hh => src/arch/arm/kvm/arm_cpu.hh
This changeset adds support for KVM on x86. Full support is split
across a number of commits since some features are relatively
complex. This changeset includes support for:
* Integer state synchronization (including segment regs)
* CPUID (gem5's CPUID values are inserted into KVM)
* x86 legacy IO (remapped and handled by gem5's memory system)
* Memory mapped IO
* PCI
* MSRs
* State dumping
Most of the functionality is fairly straight forward. There are some
quirks to support PCI enumerations since this is done in the TLB(!) in
the simulated CPUs. We currently replicate some of that code.
Unlike the ARM implementation, the x86 implementation of the virtual
CPU does not use the cycles hardware counter. KVM on x86 simulates the
time stamp counter (TSC) in the kernel. If we just measure host cycles
using perfevent, we might end up measuring a slightly different number
of cycles. If we don't get the cycle accounting right, we might end up
rewinding the TSC, with all kinds of chaos as a result.
An additional feature of the KVM CPU on x86 is extended state
dumping. This enables Python scripts controlling the simulator to
request dumping of a subset of the processor state. The following
methods are currenlty supported:
* dumpFpuRegs
* dumpIntRegs
* dumpSpecRegs
* dumpDebugRegs
* dumpXCRs
* dumpXSave
* dumpVCpuEvents
* dumpMSRs
Known limitations:
* M5 ops are currently not supported.
* FPU synchronization is not supported (only affects CPU switching).
Both of the limitations will be addressed in separate commits.
Architecture specific limitations:
* LPAE is currently not supported by gem5. We therefore panic if LPAE
is enabled when returning to gem5.
* The co-processor based interface to the architected timer is
unsupported. We can't support this due to limitations in the KVM
API on ARM.
* M5 ops are currently not supported. This requires either a kernel
hack or a memory mapped device that handles the guest<->m5
interface.
This changeset introduces the architecture independent parts required
to support KVM-accelerated CPUs. It introduces two new simulation
objects:
KvmVM -- The KVM VM is a component shared between all CPUs in a shared
memory domain. It is typically instantiated as a child of the
system object in the simulation hierarchy. It provides access
to KVM VM specific interfaces.
BaseKvmCPU -- Abstract base class for all KVM-based CPUs. Architecture
dependent CPU implementations inherit from this class
and implement the following methods:
* updateKvmState() -- Update the
architecture-dependent KVM state from the gem5
thread context associated with the CPU.
* updateThreadContext() -- Update the thread context
from the architecture-dependent KVM state.
* dump() -- Dump the KVM state using (optional).
In order to deliver interrupts to the guest, CPU
implementations typically override the tick() method and
check for, and deliver, interrupts prior to entering
KVM.
Hardware-virutalized CPU currently have the following limitations:
* SE mode is not supported.
* PC events are not supported.
* Timing statistics are currently very limited. The current approach
simply scales the host cycles with a user-configurable factor.
* The simulated system must not contain any caches.
* Since cycle counts are approximate, there is no way to request an
exact number of cycles (or instructions) to be executed by the CPU.
* Hardware virtualized CPUs and gem5 CPUs must not execute at the
same time in the same simulator instance.
* Only single-CPU systems can be simulated.
* Remote GDB connections to the guest system are not supported.
Additionally, m5ops requires an architecture specific interface and
might not be supported.
