47ff0af17e
separate the rx thread and tx thread and get rid of the dedicated flag.
dev/ns_gige.cc:
dev/ns_gige.hh:
dev/ns_gige_reg.h:
python/m5/objects/Ethernet.py:
dedicated flag goes away, we have new individual flags for
rx thread and tx thread
dev/sinic.cc:
Virtualize sinic
- The io registers are replicated many times in memory, allowing the NIC to
differentiate among several virtual interfaces.
- On the TX side, this allows multiple CPUs to initiate transmits at the same
time without locking in the software. If a partial packet is transmitted,
then the state machine blocks waiting for that virtual interface to complete
its packet. Then the state machine will move on to the next virtual
interface. The commands are kept in fifo order.
- On the RX side, multiple partial transmits can be simultaneously done.
Though a packet does not deallocate its fifo space until all preceeding
packets in the fifo are deallocated. To enable multiple receives, it
is necessary for each virtual nic to keep its own information about its
progress through the state machine.
dev/sinic.hh:
Virtualize sinic
Receive state must be virtualized since we allow the receipt of packets in
parallel.
dev/sinicreg.hh:
Virtualize sinic
separate rx thread and tx thread
create a soft interrupt and add a command to trigger it.
pad out the reserved bits in the RxDone and TxDone regs
--HG--
extra : convert_revision : c10bb23a46a89ffd1e08866c1f1621cb98069205
This is release m5_1.1 of the M5 simulator. This file contains brief "getting started" instructions. For more information, see http://m5.eecs.umich.edu. If you have questions, please send mail to m5sim-users@lists.sourceforge.net. WHAT'S INCLUDED (AND NOT) ------------------------- The basic source release includes these subdirectories: - m5: the simulator itself - m5-test: regression tests - ext: less-common external packages needed to build m5 - alpha-system: source for Alpha console and PALcode To run full-system simulations, you will need compiled console, PALcode, and kernel binaries and one or more disk images. These files are collected in a separate archive, m5_system_1.1.tar.bz2. This file is included on the CD release, or you can download it separately from Sourceforge. M5 supports Linux 2.4/2.6, FreeBSD, and the proprietary Compaq/HP Tru64 version of Unix. We are able to distribute Linux and FreeBSD bootdisks, but we are unable to distribute bootable disk images of Tru64 Unix. If you have a Tru64 license and are interested in obtaining disk images, contact us at m5-dev@eecs.umich.edu. The CD release includes a few extra goodies, such as a tar file containing doxygen-generated HTML documentation (html-docs.tar.gz), a set of Linux source patches (linux_m5-2.6.8.1.diff), and the scons program needed to build M5. If you do not have the CD, the same HTML documentation is available online at http://m5.eecs.umich.edu/docs, the Linux source patches are available at http://m5.eecs.umich.edu/dist/linux_m5-2.6.8.1.diff, and the scons program is available from http://www.scons.org. WHAT'S NEEDED ------------- - GCC version 3.3 or newer - Python 2.3 or newer - SCons 0.96.1 or newer (see http://www.scons.org) WHAT'S RECOMMENDED ------------------ - MySQL (for statistics complex statistics storage/retrieval) - Python-MysqlDB (for statistics analysis) GETTING STARTED --------------- There are two different build targets and three optimizations levels: Target: ------- ALPHA_SE - Syscall emulation simulation ALPHA_FS - Full system simulation Optimization: ------------- m5.debug - debug version of the code with tracing and without optimization m5.opt - optimized version of code with tracing m5.fast - optimized version of the code without tracing and asserts Different targets are built in different subdirectories of m5/build. Binaries with the same target but different optimization levels share the same directory. Note that you can build m5 in any directory you choose;p just configure the target directory using the 'mkbuilddir' script in m5/build. The following steps will build and test the simulator. The variable "$top" refers to the top directory where you've unpacked the files, i.e., the one containing the m5, m5-test, and ext directories. If you have a multiprocessor system, you should give scons a "-j N" argument (like make) to run N jobs in parallel. To build and test the syscall-emulation simulator: cd $top/m5/build scons ALPHA_SE/test/opt/quick This process takes under 10 minutes on a dual 3GHz Xeon system (using the '-j 4' option). To build and test the full-system simulator: 1. Unpack the full-system binaries from m5_system_1.1.tar.bz2. (See above for directions on obtaining this file if you don't have it.) This package includes disk images and kernel, palcode, and console binaries for Linux and FreeBSD. 2. Edit the SYSTEMDIR search path in $top/m5-test/SysPaths.py to include the path to your local copy of the binaries. 3. In $top/m5/build, run "scons ALPHA_FS/test/opt/quick". This process also takes under 10 minutes on a dual 3GHz Xeon system (again using the '-j 4' option).