These are not yet consumed by anything, but convert all the settings
from SCons variables to Kconfig variables.
If you have existing SConsopts files which need to be converted, you
should take a look at KCONFIG.md to learn about how kconfig is used in
gem5. You should decide if any variables need to be available to C++ or
kconfig itself, and whether those are options which should be detected
automatically, or should be up to the user. Options which should be
measured automatically should still be in SConsopts files, while user
facing options should be added to new or existing Kconfig files.
Generally, make sure you're storing c++/kconfig visible options in
env['CONF'][...]. Also remove references to sticky_vars since persistent
options should now be handled with kconfig, and export_vars since
everything in env['CONF'] is now exported automatically.
Switch SCons/gem5 to use Kconfig for configuration, except EXTRAS which
is still a sticky SCons variable. This is necessary because EXTRAS also
controls what config options exist. If it came from Kconfig itself, then
there would be a circular dependency. This dependency could
theoretically be handled by reparsing the Kconfig when EXTRAS
directories were added or removed, but that would be complicated, and
isn't supported by kconfiglib. It wouldn't be worth the significant
effort it would take to add it, just to use Kconfig more purely.
Change-Id: I29ab1940b2d7b0e6635a490452d05befe5b4a2c9
Added a resource constraint, AtomicALUOperation, to GLC atomics
performed in the TCC.
The resource constraint uses a new class, ALUFreeList array. The class
assumes the following:
- There are a fixed number of atomic ALU pipelines
- While a new cache line can be processed in each pipeline each cycle,
if a cache line is currently going through a pipeline, it can't be
processed again until it's finished
Two configuration parameters have been used to tune this behavior:
- tcc-num-atomic-alus corresponds to the number of atomic ALU pipelines
- atomic-alu-latency corresponds to the latency of atomic ALU pipelines
Change-Id: I25bdde7dafc3877590bb6536efdf57b8c540a939
This makes what are configuration and what are internal SCons variables
explicit and separate, and makes it unnecessary to call out what
variables to export to C++.
These variables will also be plumbed into and out of kconfiglib in later
changes.
Change-Id: Iaf5e098d7404af06285c421dbdf8ef4171b3f001
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/56892
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Gabe Black <gabe.black@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
The TBEStorage is used to track the resources consumed by the TBETable,
i.e. the number of available TBE slots.
structure(TBEStorage, external ="yes") {
int size();
int capacity();
int reserved();
int slotsAvailable();
bool areNSlotsAvailable(int n);
void incrementReserved();
void decrementReserved();
int addEntryToNewSlot();
void addEntryToSlot(int slot);
void removeEntryFromSlot(int slot);
}
TBEStorage resource tracking has two main differences from TBETable:
1) Allows slot reservation. This is useful to implement protocols that
employ retry/credit messages instead of stall when the controller runs
out of TBEs to accept new request.
2) Can also assign multiple entries to the same slot. This is useful to
more easily model cases where multiple transactions share the same TBE
resource (i.e. the slot).
E.g: a request that triggers a replacement in a system without
dedicated WB/Eviction buffer; both transactions can can have separate
logical TBEs associated to the same slot.
The motivation for having a separate structures for tracking TBEs
availability are twofold:
- Keeps TBETable simple and without the additional overhead for
protocols that do not need these additional features.
- Having two separate transactions sharing the same TBE resource using
the current TBETable would be cumbersome since the TBETable is indexed
by the transaction address.
Change-Id: I64106d50068320bc925243732ef8ff9ef0b6c4bf
Signed-off-by: Tiago Mück <tiago.muck@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/41157
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Add support in Ruby to use all replacement policies in Classic.
Furthermore, if new replacement policies are added to the
Classic system, the Ruby system will recognize new policies
without any other changes in Ruby system. The following list
all the major changes:
* Make Ruby cache entries (AbstractCacheEntry) inherit from
Classic cache entries (ReplaceableEntry). By doing this,
replacement policies can use cache entries from Ruby caches.
AccessPermission and print function are moved from
AbstractEntry to AbstractCacheEntry, so AbstractEntry is no
longer needed.
* DirectoryMemory and all SLICC files are changed to use
AbstractCacheEntry as their cache entry interface. So do the
python files in mem/slicc/ast which check the entry
interface.
* "main='false'" argument is added to the protocol files where
the DirectoryEntry is defined. This change helps
differentiate DirectoryEntry from CacheEntry because they are
both the instances of AbstractCacheEntry now.
* Use BaseReplacementPolicy in Ruby caches instead of
AbstractReplacementPolicy so that Ruby caches will recognize
the replacement policies from Classic.
* Add getLastAccess() and useOccupancy() function to Classic
system so that Ruby caches can use them. Move lastTouchTick
to ReplacementData struct because it's needed by
getLastAccess() to return the correct value.
* Add a 2-dimensional array of ReplacementData in Ruby caches
to store information for different replacement policies. Note
that, unlike Classic caches, where policy information is
stored in cache entries, the policy information needs to be
stored in a new 2-dimensional array. This is due to Ruby
caches deleting the cache entry every time the corresponding
cache line get evicted.
Change-Id: Idff6fdd2102a552c103e9d5f31f779aae052943f
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20879
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Reviewed-by: Matt Sinclair <mattdsinclair@gmail.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
Tested-by: kokoro <noreply+kokoro@google.com>
This patch serves to avoid name clashes with the classic cache. For
some reason having two 'SimObject' files with the same name creates
problems.
--HG--
rename : src/mem/ruby/structures/Cache.py => src/mem/ruby/structures/RubyCache.py
This patch is the final in the series. The whole series and this patch in
particular were written with the aim of interfacing ruby's directory controller
with the memory controller in the classic memory system. This is being done
since ruby's memory controller has not being kept up to date with the changes
going on in DRAMs. Classic's memory controller is more up to date and
supports multiple different types of DRAM. This also brings classic and
ruby ever more close. The patch also changes ruby's memory controller to
expose the same interface.
In my opinion, it creates needless complications in rest of the code.
Also, this structure hinders the move towards common set of code for
physical memory controllers.
This patch adds a prefetcher for the ruby memory system. The prefetcher
is based on a prefetcher implemented by others (well, I don't know
who wrote the original). The prefetcher does stride-based prefetching,
both unit and non-unit. It obseves the misses in the cache and trains on
these. After the training period is over, the prefetcher starts issuing
prefetch requests to the controller.
