Apply the gem5 namespace to the codebase.
Some anonymous namespaces could theoretically be removed,
but since this change's main goal was to keep conflicts
at a minimum, it was decided not to modify much the
general shape of the files.
A few missing comments of the form "// namespace X" that
occurred before the newly added "} // namespace gem5"
have been added for consistency.
std out should not be included in the gem5 namespace, so
they weren't.
ProtoMessage has not been included in the gem5 namespace,
since I'm not familiar with how proto works.
Regarding the SystemC files, although they belong to gem5,
they actually perform integration between gem5 and SystemC;
therefore, it deserved its own separate namespace.
Files that are automatically generated have been included
in the gem5 namespace.
The .isa files currently are limited to a single namespace.
This limitation should be later removed to make it easier
to accomodate a better API.
Regarding the files in util, gem5:: was prepended where
suitable. Notice that this patch was tested as much as
possible given that most of these were already not
previously compiling.
Change-Id: Ia53d404ec79c46edaa98f654e23bc3b0e179fe2d
Signed-off-by: Daniel R. Carvalho <odanrc@yahoo.com.br>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/46323
Maintainer: Bobby R. Bruce <bbruce@ucdavis.edu>
Reviewed-by: Bobby R. Bruce <bbruce@ucdavis.edu>
Reviewed-by: Matthew Poremba <matthew.poremba@amd.com>
Tested-by: kokoro <noreply+kokoro@google.com>
In this context, the decoder width is the number of bytes that are fed
into the decoder at once. This is frequently the same as the size of an
instruction, but in instructions with occasionally variable instruction
sizes (ARM, RISCV), or extremely variable instruction sizes (x86) there
may be no relation.
Rather than determining the amount of data to feed to the decoder based
on a MachInst type defined by each ISA, this new interface adds some new
properties to the base InstDecoder class each arch specific decoder
inherits from. These are the size of the incoming buffer, a pointer to
wherever that data should end up, and a mask for masking a PC value so
it aligns with the instruction size.
These values are filled in by a templated InstDecoder constructor which
is templated based on what would have historically been the MachInst
type.
Because the "moreBytes" method would historically accept a parameter of
type MachInst, this parameter has also been eliminated. Now, the
decoder's parent object should use the pointer and size values to fill
in the buffer moreBytes reads. Then when moreBytes is called, it just
uses the buffer without having to show what its type is externally.
Change-Id: I0642cdb6a61e152441ca4ce47d748639175cda90
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/40175
Reviewed-by: Gabe Black <gabe.black@gmail.com>
Maintainer: Gabe Black <gabe.black@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
This DPRINTF accesses the ExtMachInst typed machInst member of the
StaticInst class, and so is ISA dependent. Move the DPRINTF to where the
instructions are actually decoded where that type doesn't have to be
disambiguated.
Also, this change makes this DPRINTF more accurate, since microops are
not really "decoded" when they are extracted from a macroop. The process
of unpacking them to feed into the rest of the CPU should be fairly
trivial, so really they're just being retrieved. With the DPRINTF in
this new position, it will only trigger when an instruction is actually
decoded from memory.
Change-Id: I14145165b93bb004057a729fa7909cd2d3d34d29
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/40099
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
That particular ExtMachInst is a convenient placeholder, but a value
of 0 in RISCV or a static uninitialized ExtMachInst (which will
therefore be all zeroes) on x86 works just as well, and removes the
need for an ISA specific constant.
Also, the idea of a universal Nop doesn't always make sense since it
could be that what, exactly, doesn't do anything depends on context
which would be lost on a constant value of an ExtMachInst. For
instance, the value of an ExtMachInst that makes sense might depend on
what mode the CPU was in, etc.
Change-Id: I1f1a43a5c607a667e11b79bcf6e059e4f7141b3f
Reviewed-on: https://gem5-review.googlesource.com/6825
Reviewed-by: Gabe Black <gabeblack@google.com>
Reviewed-by: Alec Roelke <ar4jc@virginia.edu>
Maintainer: Gabe Black <gabeblack@google.com>
This patch fixes some bugs that were missed with the changes to the
decoder that enabled compatibility with compressed instructions. In
order to accommodate speculation with variable instruction widths, a few
assertions in decoder had to be changed to returning faults as the
specification describes should normally happen. The rest of these
assertions will be changed in a later patch.
[Remove commented-out debugging line and add clarifying comment to
registerName in utility.hh.]
Change-Id: I3f333008430d4a905cb59547a3513f5149b43b95
Reviewed-on: https://gem5-review.googlesource.com/4041
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Alec Roelke <ar4jc@virginia.edu>
This patch adds compatibility with the 64-bit compressed extension to
the RISC-V ISA, RV64C. Current versions of the toolchain may use
compressed instructions in glibc by default, which can only be
overridden by recompiling the entire toolchain (simply adding
"-march=rv64g" or "-march=rv64imafd" when compiling a binary is not
sufficient to use uncompressed instructions in glibc functions in the
binary).
[Update diassembly generation for new RegId type.]
[Rebase onto master.]
Change-Id: Ifd5a5ea746704ce7e1b111442c3eb84c509a98b4
Reviewed-on: https://gem5-review.googlesource.com/3860
Reviewed-by: Alec Roelke <ar4jc@virginia.edu>
Maintainer: Alec Roelke <ar4jc@virginia.edu>
First of five patches adding RISC-V to GEM5. This patch introduces the
base 64-bit ISA (RV64I) in src/arch/riscv for use with syscall emulation.
The multiply, floating point, and atomic memory instructions will be added
in additional patches, as well as support for more detailed CPU models.
The loader is also modified to be able to parse RISC-V ELF files, and a
"Hello world\!" example for RISC-V is added to test-progs.
Patch 2 will implement the multiply extension, RV64M; patch 3 will implement
the floating point (single- and double-precision) extensions, RV64FD;
patch 4 will implement the atomic memory instructions, RV64A, and patch 5
will add support for timing, minor, and detailed CPU models that is missing
from the first four patches (such as handling locked memory).
[Removed several unused parameters and imports from RiscvInterrupts.py,
RiscvISA.py, and RiscvSystem.py.]
[Fixed copyright information in RISC-V files copied from elsewhere that had
ARM licenses attached.]
[Reorganized instruction definitions in decoder.isa so that they are sorted
by opcode in preparation for the addition of ISA extensions M, A, F, D.]
[Fixed formatting of several files, removed some variables and
instructions that were missed when moving them to other patches, fixed
RISC-V Foundation copyright attribution, and fixed history of files
copied from other architectures using hg copy.]
[Fixed indentation of switch cases in isa.cc.]
[Reorganized syscall descriptions in linux/process.cc to remove large
number of repeated unimplemented system calls and added implmementations
to functions that have received them since it process.cc was first
created.]
[Fixed spacing for some copyright attributions.]
[Replaced the rest of the file copies using hg copy.]
[Fixed style check errors and corrected unaligned memory accesses.]
[Fix some minor formatting mistakes.]
Signed-off by: Alec Roelke
Signed-off by: Jason Lowe-Power <jason@lowepower.com>
