This adds 64-bit statically linked big and little endian
binaries for the hello test program.
It should be noted that all possible combinations of ABI
version and endianness are possible for 64-bit binaries.
However, standard toolchains always use ELF ABI v1 for
big endian and ELF ABI v2 for little endian binaries.
Change-Id: I2dca7eaa2b04a7b68b117ada799d4c3bb69368be
Signed-off-by: Sandipan Das <sandipan@linux.ibm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/40951
Reviewed-by: Boris Shingarov <shingarov@gmail.com>
Reviewed-by: Bobby R. Bruce <bbruce@ucdavis.edu>
Tested-by: kokoro <noreply+kokoro@google.com>
Maintainer: Bobby R. Bruce <bbruce@ucdavis.edu>
Commit a440108cc ("tests: Add Makefiles for hello")
introduced Makefiles for building the hello test binary
for ARM and x86 using dockcross. Since dockcross also
provides an image with a 64-bit little endian toolchain
for Power, this adds a Makefile for building the hello
binary.
As of this moment, 64-bit little endian (ppc64le) is the
prevalent variant supported by most distributions. Hence,
we are currently limited to only building the binary for
this variant.
Change-Id: Ic20322ca33c69634d9f17d30b29e522cc35742fb
Signed-off-by: Sandipan Das <sandipan@linux.ibm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/40949
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Bobby R. Bruce <bbruce@ucdavis.edu>
Maintainer: Bobby R. Bruce <bbruce@ucdavis.edu>
The 32-bit POWER reference test binary was removed in c1ebdf66f
(as a nasty surprise for POWER users).
The remaining platforms split between two approaches:
MIPS rebuilds "hello" from source.
This fails for two reasons:
1) The trivial reason is that on POWER make abends due to no makefile.
2) The more fundamental reason is that gem5 is not completely bug-free
(especially the Decoder on POWER in this case), therefore regression
testing is only possible if we have not just some hello program, but
a very particular bit sequence to serve as an immutable reference.
ARM and X86 follow the reference-bit-sequence approach. POWER will
be consistent with same. Including the sha1 for hello32,
77b27b67393311546e768b5ff35202490bad71aa, as a simple immutability
assurance. I have also renamed hello to hello32 in anticipation to
merge Sandipan's e52dbcb.
Change-Id: I77ef31349c9e50b987c6f58bb23324844527366d
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/40635
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Reviewed-by: Sandipan Das <sandipan@linux.ibm.com>
Reviewed-by: Pratik Sampat <pratik.r.sampat@gmail.com>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
As we are now going to maintain different bundles of resources for each
gem5 release, the resources have been archived to
http://dist.gem5.org/dist/current for gem5 19. The development branch
will use http://dist.gem5.org/dist/develop going forward. New releases
will follow the format http://dist.gem5.org/dist/{VERSION}.
This patch makes the resources url a command-line parameter, set to the
"correct" url by default. This will be updated to the correct, archived,
version subdirectory upon release of a new gem5 version. E.g.:
http://dist.gem5.org/dist/v20 for the gem5 20 release.
Some Make files have been cleaned up to no longer fetch and push to
remote locations. As gem5-resources is implemented, sources will be
moved to the gem5-resources resository and compiled binaries, etc.
pulled from our Google Cloud bucket from the tests themselves.
Change-Id: Ia16c496be3a60283ecc431ffaa5b059e1932b526
Issue-on: https://gem5.atlassian.net/browse/GEM5-431
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/27987
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
riscv asmtest uses multiprocessing.Pool to run multiple gem5
processes concurrently.
By using gem5 default options, processes will fail because:
- accessing to the same m5out directory
- listening too many remote gdb ports at the same time
This will set independent m5out directories and disable remote gdb
ports for asmtest gem5 processes.
Change-Id: Ie4c81232210568cd1945adc2b99eebc019d705b6
Signed-off-by: Xin Ouyang <xin.ouyang@streamcomputing.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/22863
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Alec Roelke <alec.roelke@gmail.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
Tested-by: kokoro <noreply+kokoro@google.com>
An ARM squashfs rootfs that runs m5 exit can be generated for example
with:
make ARCH=arm_A64 CROSS_COMPILE=aarch64-linux-gnu- squashfs
The existing Makefile.x86 was not used as a basis because we would
like to provide a setup that allows users to use their own compilers
if they wish, without requiring dockcross.
Change-Id: I19c54cf0575b405f191f45aaf1e4a05c3f2e69ae
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/22223
Reviewed-by: Bobby R. Bruce <bbruce@ucdavis.edu>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
Tested-by: kokoro <noreply+kokoro@google.com>
The O3 model supports unaligned accesses across page boundaries.
This changeset provides a stress test for the feature.
Other benchmarks exercise it, but their coverage is spotty. This
test does nothing else except poke bytes which straddle page
boundaries.
Change-Id: Ic20c2862bcb7af7be091030c12916ba499db10c7
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/22303
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
This changeset adds a test to check the redirection features
added in faux-filesystem changeset. The test contains a
"chdir" system call to "/proc" which should be redirected to
"$(gem5-dir)/m5out/fs/proc" (as specified by the config files).
After "chdir", the test subsequently outputs the "/proc/cpuinfo"
file which should output a configuration of a fake cpu with
values set by a Python configuration file.
Note, the test will call "clone" once. To avoid a runtime error,
make sure that you run this test with "-n2" supplied to the
"config/example/se.py" script.
Change-Id: I505b046b7a4feddfa93a6ef0f0773ac43078cc94
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/17112
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
The Makefiles for the pthreads test don't behave like typical
Makefiles that support cross compilation. Rewrite the Makefile to make
cross-compilation more convenient and add targets for aarch{32,64}.
Change-Id: I7cae378492681744b6bb11dd5af69db81ec54229
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/16022
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Add a test to print out stack contents for SE mode programs.
The test will print out argc, argv, envp, and some auxiliary
vectors.
Change-Id: I489d752ee40fde24c531d8918d0c050f4df936c5
Reviewed-on: https://gem5-review.googlesource.com/3440
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
This adds Makefiles for hello for ARM and x86 by leveraging docker and
dockcross. See https://github.com/dockcross/dockcross for more
information.
These Makefiles also allow for automatic uploading to the correct location
for users to download when running the new tests.
Change-Id: I7085000393cd5283502a7af362c85befda749181
Signed-off-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-on: https://gem5-review.googlesource.com/4883
This patch adds a subset (rv64*) of RISC-V assembly tests. The original
riscv-test project can be found here:
https://github.com/riscv/riscv-tests. The riscv-test project is under the
BSD license (https://github.com/riscv/riscv-tests/blob/master/LICENSE)
and is maintained separately from gem5 project.
The tests have been slightly modified to work in gem5 SE mode:
(1) Removed a trap handler used in riscv-tests for bare-metal systems
(2) Instead of throwing an exception, the tests call the exit syscall
with
the exit code of
- '0' if SUCCESS
- Failed test case's number (non-zero) if FAILURE
The exit code can be captured after a simuation completes.
In addition to original RISC-V assembly tests, this patch adds several
assembly tests specifically for AMO, LR, SC and system calls. Those
tests target a multi-core system.
(1) rv64uamt: multi-threaded tests for A-extension instructions
(2) rv64samt: multi-threaded tests for clone and futex system calls
This patch also makes the style checker ignore RISC-V assembly test
directory. The assembly tests are maintained in an external project
that does not follow the gem5 coding conventions.
Please find more details in the README file included in this patch.
Change-Id: Id1015d9a2c6c7d0341fa8b81483289e5f0bfcec0
Reviewed-on: https://gem5-review.googlesource.com/6703
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
Simple program that spawns threads equal to the number of CPU cores and
has some false sharing for testing coherence protocols.
Change-Id: I5be907fd6fea9a8b8e80b63785d186619be41354
Signed-off-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-on: https://gem5-review.googlesource.com/8901
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
This patch makes use of ImmOp's polymorphism to remove unnecessary
casting from the implementations of arithmetic instructions with
immediate operands and to remove the CUIOp format by combining it with
the CIOp format (compressed arithmetic instructions with immediate
operands). Interestingly, RISC-V specifies that instructions with
unsigned immediate operands still need to sign-extend the immediates
from 12 (or 20) bits to 64 bits, so that is left alone.
Change-Id: If20d70c1e90f379b9ed8a4155b2b9222b6defe16
Reviewed-on: https://gem5-review.googlesource.com/6401
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Tuan Ta <qtt2@cornell.edu>
Maintainer: Alec Roelke <ar4jc@virginia.edu>
This patch updates the binaries and results for hello and insttest
regressions using the compressed extension.
Change-Id: I3d8f2248f490521d3e0dc05c48735cab82b1b04e
Reviewed-on: https://gem5-review.googlesource.com/4042
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
This patch adds instruction tests for the RV64C extension
implementation. It also updates existing executables for the latest
riscv-tools now that they are compatible.
[Update for changes to parents.]
Change-Id: Id4cfd966a8cae39b0d728b02849622fd00ee7e0e
Reviewed-on: https://gem5-review.googlesource.com/3862
Maintainer: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Update the "Hello, world!" executable for RISC-V to use the latest GNU
Linux toolchain and fix the stats accordingly.
Change-Id: I5ff3d7f4bb41b10170038b8c07492f15bb54a022
Reviewed-on: https://gem5-review.googlesource.com/3560
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
Some of the functions in the Linux toolchain that allocate memory make
use of paired LR and SC instructions, which didn't work properly for
that toolchain. This patch fixes that so attempting to use those
functions doesn't cause an endless loop of failed SC instructions.
Change-Id: If27696323dd6229a0277818e3744fbdf7180fca7
Reviewed-on: https://gem5-review.googlesource.com/2340
Maintainer: Alec Roelke <ar4jc@virginia.edu>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Previously, RISC-V in gem5 only supported RISC-V's Newlib toolchain
(riscv64-unknown-elf-*) due to incorrect assumptions made in the initial
setup of the user stack in SE mode. This patch fixes that by referring
to the RISC-V proxy kernel code (https://github.com/riscv/riscv-pk) and
setting up the stack according to how it does it. Now binaries compiled
using the Linux toolchain (riscv64-unknown-linux-gnu-*) will run as
well.
[Update for recent changes to MemState to add accessors and mutators to
get its members.]
Change-Id: I6d2c486df7688efe3df54273e9aa0fd686851285
Reviewed-on: https://gem5-review.googlesource.com/2305
Maintainer: Alec Roelke <ar4jc@virginia.edu>
Reviewed-by: Brandon Potter <Brandon.Potter@amd.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
This patch is the eighth patch in a series adding RISC-V to gem5, and
third of the bonus patches to the original series of five. It adds some
regression tests to RISC-V.
Regression tests included:
- se/00.hello
- se/02.insttest (split into several binaries which are not included due
to large size)
The tests added to 00.insttest will need to be build manually; to
facilitate this, a Makefile is included. The required toolchain and
compiler (riscv64-unknown-elf-gcc) can be built from the riscv-tools
GitHub repository at https://github.com/riscv/riscv-tools.
Note that because EBREAK only makes sense when gdb is running or while in
FS mode, it is not included in the linux-rv64i insttest. ERET is not
included because it does not make sense in SE mode and, in fact, causes
a panic by design.
Note also that not every system call is tested in linux-rv64i; of the ones
defined in linux/process.hh, some have been given numbers but not
definitions for the toolchain, or are merely stubs that always return 0. Of
the ones that do work properly, only a subset are tested due to similar
functionality.
Signed-off by: Alec Roelke
Signed-off by: Jason Lowe-Power <jason@lowepower.com>
This is a simple test program for the new mwait implemenation. It is uses
m5threads to create to threads of execution in syscall emulation mode that
interact using the mwait instruction.
Committed by: Nilay Vaish <nilay@cs.wisc.edu>
src/arch/x86/SConscript:
Add in process source files.
src/arch/x86/isa_traits.hh:
Replace magic constant numbers with the x86 register names.
src/arch/x86/miscregfile.cc:
Make clear the miscreg file succeed. There aren't any misc regs, so clearing them is very easy.
src/arch/x86/process.hh:
An X86 process class.
src/base/loader/elf_object.cc:
Add in code to recognize x86 as an architecture.
src/base/traceflags.py:
Add an x86 traceflag
src/sim/process.cc:
Add in code to create an x86 process.
src/arch/x86/intregs.hh:
A file which declares names for the integer register indices.
src/arch/x86/linux/linux.cc:
src/arch/x86/linux/linux.hh:
A very simple translation of SPARC's linux.cc and linux.hh. It's probably not correct for x86, but it might not be correct for SPARC either.
src/arch/x86/linux/process.cc:
src/arch/x86/linux/process.hh:
An x86 linux process. The syscall table is split out into it's own file.
src/arch/x86/linux/syscalls.cc:
The x86 Linux syscall table and the uname function.
src/arch/x86/process.cc:
The x86 process base class.
tests/test-progs/hello/bin/x86/linux/hello:
An x86 hello world test binary.
--HG--
extra : convert_revision : f22919e010c07aeaf5757dca054d9877a537fd08
