Files
gem5/src/dev/pci/device.hh
Pouya Fotouhi e0040fe8fe dev: Adding support for large BAR
During PCI setup, this patch checks if a Base Address Register (BAR) is
used as a large BAR (64 bits rather than 32), and return proper address
range. The order which updates are done is decided by kernel, so this
patch implements both cases (writing lower or upper bits first).

Bit 2 in a BAR indicates a 64-bit decoder (10X to be more exact, 11X is
reserved).

The addresses in BARAddrs are full addresses and are set to zero for BAR
providing upper 32 bits to avoid conflicts in addr ranges reported.

Change-Id: I93303d36ac83dab9ed6837c81e77c9dfb778f409
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/22082
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
Tested-by: kokoro <noreply+kokoro@google.com>
2019-10-30 18:47:09 +00:00

237 lines
7.2 KiB
C++

/*
* Copyright (c) 2013 ARM Limited
* All rights reserved
*
* The license below extends only to copyright in the software and shall
* not be construed as granting a license to any other intellectual
* property including but not limited to intellectual property relating
* to a hardware implementation of the functionality of the software
* licensed hereunder. You may use the software subject to the license
* terms below provided that you ensure that this notice is replicated
* unmodified and in its entirety in all distributions of the software,
* modified or unmodified, in source code or in binary form.
*
* Copyright (c) 2004-2005 The Regents of The University of Michigan
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are
* met: redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer;
* redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution;
* neither the name of the copyright holders nor the names of its
* contributors may be used to endorse or promote products derived from
* this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* Authors: Ali Saidi
* Andrew Schultz
* Nathan Binkert
*/
/* @file
* Interface for devices using PCI configuration
*/
#ifndef __DEV_PCI_DEVICE_HH__
#define __DEV_PCI_DEVICE_HH__
#include <cstring>
#include <vector>
#include "dev/dma_device.hh"
#include "dev/pci/host.hh"
#include "dev/pci/pcireg.h"
#include "params/PciDevice.hh"
#include "sim/byteswap.hh"
#define BAR_IO_MASK 0x3
#define BAR_MEM_MASK 0xF
#define BAR_IO_SPACE_BIT 0x1
#define BAR_IO_SPACE(x) ((x) & BAR_IO_SPACE_BIT)
#define BAR_NUMBER(x) (((x) - PCI0_BASE_ADDR0) >> 0x2);
/**
* PCI device, base implementation is only config space.
*/
class PciDevice : public DmaDevice
{
protected:
const PciBusAddr _busAddr;
/** The current config space. */
PCIConfig config;
/** The capability list structures and base addresses
* @{
*/
const int PMCAP_BASE;
const int PMCAP_ID_OFFSET;
const int PMCAP_PC_OFFSET;
const int PMCAP_PMCS_OFFSET;
PMCAP pmcap;
const int MSICAP_BASE;
MSICAP msicap;
const int MSIXCAP_BASE;
const int MSIXCAP_ID_OFFSET;
const int MSIXCAP_MXC_OFFSET;
const int MSIXCAP_MTAB_OFFSET;
const int MSIXCAP_MPBA_OFFSET;
int MSIX_TABLE_OFFSET;
int MSIX_TABLE_END;
int MSIX_PBA_OFFSET;
int MSIX_PBA_END;
MSIXCAP msixcap;
const int PXCAP_BASE;
PXCAP pxcap;
/** @} */
/** MSIX Table and PBA Structures */
std::vector<MSIXTable> msix_table;
std::vector<MSIXPbaEntry> msix_pba;
/** The size of the BARs */
uint32_t BARSize[6];
/** The current address mapping of the BARs */
Addr BARAddrs[6];
/** Whether the BARs are really hardwired legacy IO locations. */
bool legacyIO[6];
/**
* Does the given BAR represent 32 lower bits of a 64-bit address?
*/
bool
isLargeBAR(int bar) const
{
return bits(config.baseAddr[bar], 2, 1) == 0x2;
}
/**
* Does the given address lie within the space mapped by the given
* base address register?
*/
bool
isBAR(Addr addr, int bar) const
{
assert(bar >= 0 && bar < 6);
return BARAddrs[bar] <= addr && addr < BARAddrs[bar] + BARSize[bar];
}
/**
* Which base address register (if any) maps the given address?
* @return The BAR number (0-5 inclusive), or -1 if none.
*/
int
getBAR(Addr addr)
{
for (int i = 0; i <= 5; ++i)
if (isBAR(addr, i))
return i;
return -1;
}
/**
* Which base address register (if any) maps the given address?
* @param addr The address to check.
* @retval bar The BAR number (0-5 inclusive),
* only valid if return value is true.
* @retval offs The offset from the base address,
* only valid if return value is true.
* @return True iff address maps to a base address register's region.
*/
bool
getBAR(Addr addr, int &bar, Addr &offs)
{
int b = getBAR(addr);
if (b < 0)
return false;
offs = addr - BARAddrs[b];
bar = b;
return true;
}
public: // Host configuration interface
/**
* Write to the PCI config space data that is stored locally. This may be
* overridden by the device but at some point it will eventually call this
* for normal operations that it does not need to override.
* @param pkt packet containing the write the offset into config space
*/
virtual Tick writeConfig(PacketPtr pkt);
/**
* Read from the PCI config space data that is stored locally. This may be
* overridden by the device but at some point it will eventually call this
* for normal operations that it does not need to override.
* @param pkt packet containing the write the offset into config space
*/
virtual Tick readConfig(PacketPtr pkt);
protected:
PciHost::DeviceInterface hostInterface;
Tick pioDelay;
Tick configDelay;
public:
Addr pciToDma(Addr pci_addr) const {
return hostInterface.dmaAddr(pci_addr);
}
void intrPost() { hostInterface.postInt(); }
void intrClear() { hostInterface.clearInt(); }
uint8_t interruptLine() const { return letoh(config.interruptLine); }
/**
* Determine the address ranges that this device responds to.
*
* @return a list of non-overlapping address ranges
*/
AddrRangeList getAddrRanges() const override;
/**
* Constructor for PCI Dev. This function copies data from the
* config file object PCIConfigData and registers the device with
* a PciHost object.
*/
PciDevice(const PciDeviceParams *params);
/**
* Serialize this object to the given output stream.
* @param os The stream to serialize to.
*/
void serialize(CheckpointOut &cp) const override;
/**
* Reconstruct the state of this object from a checkpoint.
* @param cp The checkpoint use.
* @param section The section name of this object
*/
void unserialize(CheckpointIn &cp) override;
const PciBusAddr &busAddr() const { return _busAddr; }
};
#endif // __DEV_PCI_DEVICE_HH__