gem5/src/base/addr_range.test.cc

/*
 * Copyright (c) 2019 The Regents of the University of California
 * Copyright (c) 2018-2019 ARM Limited
 * All rights reserved
 *
 * The license below extends only to copyright in the software and shall
 * not be construed as granting a license to any other intellectual
 * property including but not limited to intellectual property relating
 * to a hardware implementation of the functionality of the software
 * licensed hereunder.  You may use the software subject to the license
 * terms below provided that you ensure that this notice is replicated
 * unmodified and in its entirety in all distributions of the software,
 * modified or unmodified, in source code or in binary form.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions are
 * met: redistributions of source code must retain the above copyright
 * notice, this list of conditions and the following disclaimer;
 * redistributions in binary form must reproduce the above copyright
 * notice, this list of conditions and the following disclaimer in the
 * documentation and/or other materials provided with the distribution;
 * neither the name of the copyright holders nor the names of its
 * contributors may be used to endorse or promote products derived from
 * this software without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 */

#include <gtest/gtest.h>

#include <cmath>

#include "base/addr_range.hh"
#include "base/bitfield.hh"

TEST(AddrRangeTest, ValidRange)
{
    AddrRange r;
    EXPECT_FALSE(r.valid());
}

/*
 * This following tests check the behavior of AddrRange when initialized with
 * a start and end address. The expected behavior is that the first address
 * within the range will be the start address, and the last address in the
 * range will be the (end - 1) address.
 */
TEST(AddrRangeTest, EmptyRange)
{
    AddrRange r(0x0, 0x0);

    /*
     * Empty ranges are valid.
     */
    EXPECT_TRUE(r.valid());
    EXPECT_EQ(0x0, r.start());
    EXPECT_EQ(0x0, r.end());
    EXPECT_EQ(0, r.size());

    /*
     * With no masks, granularity equals the size of the range.
     */
    EXPECT_EQ(0, r.granularity());

    /*
     * With no masks, "interleaved()" returns false.
     */
    EXPECT_FALSE(r.interleaved());

    /*
     * With no masks, "stripes()" returns ULL(1).
     */
    EXPECT_EQ(ULL(1), r.stripes());
    EXPECT_EQ("[0:0]", r.to_string());
}

TEST(AddrRangeTest, RangeSizeOfOne)
{
    AddrRange r(0x0, 0x1);
    EXPECT_TRUE(r.valid());
    EXPECT_EQ(0x0, r.start());
    EXPECT_EQ(0x1, r.end());
    EXPECT_EQ(1, r.size());
    EXPECT_EQ(1, r.granularity());
    EXPECT_FALSE(r.interleaved());
    EXPECT_EQ(ULL(1), r.stripes());
    EXPECT_EQ("[0:0x1]", r.to_string());
}

TEST(AddrRangeTest, Range16Bit)
{
    AddrRange r(0xF000, 0xFFFF);
    EXPECT_TRUE(r.valid());
    EXPECT_EQ(0xF000, r.start());
    EXPECT_EQ(0xFFFF, r.end());
    EXPECT_EQ(0x0FFF, r.size());
    EXPECT_EQ(0x0FFF, r.granularity());
    EXPECT_FALSE(r.interleaved());
    EXPECT_EQ(ULL(1), r.stripes());
    EXPECT_EQ("[0xf000:0xffff]", r.to_string());
}

TEST(AddrRangeTest, InvalidRange)
{
    AddrRange r(0x1, 0x0);
    EXPECT_FALSE(r.valid());
}

TEST(AddrRangeTest, LessThan)
{
    /*
     * The less-than override is a bit unintuitive and does not have a
     * corresponding greater than. It compares the AddrRange.start() values.
     * If they are equal, the "intlvMatch" values are compared. This is
     * zero when AddRange is initialized with a just a start and end address.
     */
    AddrRange r1(0xF000, 0xFFFF);
    AddrRange r2(0xF001, 0xFFFF);
    AddrRange r3(0xF000, 0xFFFF);

    EXPECT_TRUE(r1 < r2);
    EXPECT_FALSE(r2 < r1);
    EXPECT_FALSE(r1 < r3);
    EXPECT_FALSE(r3 < r1);
}

TEST(AddrRangeTest, EqualToNotEqualTo)
{
    AddrRange r1(0x1234, 0x5678);
    AddrRange r2(0x1234, 0x5678);
    AddrRange r3(0x1234, 0x5679);

    EXPECT_TRUE(r1 == r2);
    EXPECT_FALSE(r1 == r3);
    EXPECT_FALSE(r1 != r2);
    EXPECT_TRUE(r1 != r3);

    EXPECT_TRUE(r2 == r1);
    EXPECT_FALSE(r3 == r1);
    EXPECT_FALSE(r2 != r1);
    EXPECT_TRUE(r3 != r1);
}

TEST(AddrRangeTest, MergesWith)
{
    /*
     * AddrRange.mergesWith will return true if the start, end, and masks
     * are the same.
     */
    AddrRange r1(0x10, 0x1F);
    AddrRange r2(0x10, 0x1F);

    EXPECT_TRUE(r1.mergesWith(r2));
    EXPECT_TRUE(r2.mergesWith(r1));
}

TEST(AddrRangeTest, DoesNotMergeWith)
{
    AddrRange r1(0x10, 0x1E);
    AddrRange r2(0x10, 0x1F);

    EXPECT_FALSE(r1.mergesWith(r2));
    EXPECT_FALSE(r2.mergesWith(r1));
}

TEST(AddrRangeTest, IntersectsCompleteOverlap)
{
    AddrRange r1(0x21, 0x30);
    AddrRange r2(0x21, 0x30);

    EXPECT_TRUE(r1.intersects(r2));
    EXPECT_TRUE(r2.intersects(r1));
}

TEST(AddrRangeTest, IntersectsAddressWithin)
{
    AddrRange r1(0x0, 0xF);
    AddrRange r2(0x1, 0xE);

    EXPECT_TRUE(r1.intersects(r2));
    EXPECT_TRUE(r2.intersects(r1));
}

TEST(AddrRangeTest, IntersectsPartialOverlap)
{
    AddrRange r1(0x0F0, 0x0FF);
    AddrRange r2(0x0F5, 0xF00);

    EXPECT_TRUE(r1.intersects(r2));
    EXPECT_TRUE(r2.intersects(r1));
}

TEST(AddrRangeTest, IntersectsNoOverlap)
{
    AddrRange r1(0x00, 0x10);
    AddrRange r2(0x11, 0xFF);

    EXPECT_FALSE(r1.intersects(r2));
    EXPECT_FALSE(r2.intersects(r1));
}

TEST(AddrRangeTest, IntersectsFirstLastAddressOverlap)
{
    AddrRange r1(0x0, 0xF);
    AddrRange r2(0xF, 0xF0);

    /*
     * The "end address" is not in the range. Therefore, if
     * r1.end() == r2.start(), the ranges do not intersect.
     */
    EXPECT_FALSE(r1.intersects(r2));
    EXPECT_FALSE(r2.intersects(r1));
}

TEST(AddrRangeTest, isSubsetCompleteOverlap)
{
    AddrRange r1(0x10, 0x20);
    AddrRange r2(0x10, 0x20);

    EXPECT_TRUE(r1.isSubset(r2));
    EXPECT_TRUE(r2.isSubset(r1));
}

TEST(AddrRangeTest, isSubsetNoOverlap)
{
    AddrRange r1(0x10, 0x20);
    AddrRange r2(0x20, 0x22);

    EXPECT_FALSE(r1.isSubset(r2));
    EXPECT_FALSE(r2.isSubset(r1));
}

TEST(AddrRangeTest, isSubsetTrueSubset)
{
    AddrRange r1(0x10, 0x20);
    AddrRange r2(0x15, 0x17);

    EXPECT_TRUE(r2.isSubset(r1));
    EXPECT_FALSE(r1.isSubset(r2));
}

TEST(AddrRangeTest, isSubsetPartialSubset)
{
    AddrRange r1(0x20, 0x30);
    AddrRange r2(0x26, 0xF0);

    EXPECT_FALSE(r1.isSubset(r2));
    EXPECT_FALSE(r2.isSubset(r1));
}

TEST(AddrRangeTest, isSubsetInterleavedCompleteOverlap)
{
    AddrRange r1(0x00, 0x100, {0x40}, 0);
    AddrRange r2(0x00, 0x40);

    EXPECT_TRUE(r2.isSubset(r1));
}

TEST(AddrRangeTest, isSubsetInterleavedNoOverlap)
{
    AddrRange r1(0x00, 0x100, {0x40}, 1);
    AddrRange r2(0x00, 0x40);

    EXPECT_FALSE(r2.isSubset(r1));
}

TEST(AddrRangeTest, isSubsetInterleavedPartialOverlap)
{
    AddrRange r1(0x00, 0x100, {0x40}, 0);
    AddrRange r2(0x10, 0x50);

    EXPECT_FALSE(r2.isSubset(r1));
}

TEST(AddrRangeTest, Contains)
{
    AddrRange r(0xF0, 0xF5);

    EXPECT_FALSE(r.contains(0xEF));
    EXPECT_TRUE(r.contains(0xF0));
    EXPECT_TRUE(r.contains(0xF1));
    EXPECT_TRUE(r.contains(0xF2));
    EXPECT_TRUE(r.contains(0xF3));
    EXPECT_TRUE(r.contains(0xF4));
    EXPECT_FALSE(r.contains(0xF5));
    EXPECT_FALSE(r.contains(0xF6));
}

TEST(AddrRangeTest, ContainsInAnEmptyRange)
{
    AddrRange r(0x1, 0x1);

    EXPECT_FALSE(r.contains(0x1));
}

TEST(AddrRangeTest, RemoveIntlvBits)
{
    AddrRange r(0x01, 0x10);

    /*
     * When there are no masks, AddrRange.removeIntlBits just returns the
     * address parameter.
     */
    Addr a(56);
    a = r.removeIntlvBits(a);
    EXPECT_EQ(56, a);
}

TEST(AddrRangeTest, addIntlvBits)
{
    AddrRange r(0x01, 0x10);

    /*
     * As with AddrRange.removeIntlBits, when there are no masks,
     * AddrRange.addIntlvBits just returns the address parameter.
     */
    Addr a(56);
    a = r.addIntlvBits(a);
    EXPECT_EQ(56, a);
}

TEST(AddrRangeTest, OffsetInRange)
{
    AddrRange r(0x01, 0xF0);
    EXPECT_EQ(0x04, r.getOffset(0x5));
}

TEST(AddrRangeTest, OffsetOutOfRangeAfter)
{
    /*
     * If the address is less than the range, MaxAddr is returned.
     */
    AddrRange r(0x01, 0xF0);
    EXPECT_EQ(MaxAddr, r.getOffset(0xF0));
}

TEST(AddrRangeTest, OffsetOutOfRangeBefore)
{
    AddrRange r(0x05, 0xF0);
    EXPECT_EQ(MaxAddr, r.getOffset(0x04));
}

/*
 * The following tests check the behavior of AddrRange when initialized with
 * a start and end address, as well as masks to distinguish interleaving bits.
 */
TEST(AddrRangeTest, LsbInterleavingMask)
{
    Addr start = 0x00;
    Addr end   = 0xFF;
    std::vector<Addr> masks;
    /*
     * The address is in range if the LSB is set, i.e. is the value is odd.
     */
    masks.push_back(1);
    uint8_t intlv_match = 1;

    AddrRange r(start, end, masks, intlv_match);
    EXPECT_TRUE(r.valid());
    EXPECT_EQ(start, r.start());
    EXPECT_EQ(end, r.end());
    /*
     * With interleaving, it's assumed the size is equal to
     * start - end >> [number of masks].
     */
    EXPECT_EQ(0x7F, r.size());
    /*
     * The Granularity, the size of regions created by the interleaving bits,
     * which, in this case, is one.
     */
    EXPECT_EQ(1, r.granularity());
    EXPECT_TRUE(r.interleaved());
    EXPECT_EQ(ULL(2), r.stripes());
    EXPECT_EQ("[0:0xff] a[0]^\b=1", r.to_string());
}

TEST(AddrRangeTest, TwoInterleavingMasks)
{
    Addr start = 0x0000;
    Addr end   = 0xFFFF;
    std::vector<Addr> masks;
    /*
     * There are two marks, the two LSBs.
     */
    masks.push_back(1);
    masks.push_back((1 << 1));
    uint8_t intlv_match = (1 << 1) | 1;

    AddrRange r(start, end, masks, intlv_match);
    EXPECT_TRUE(r.valid());
    EXPECT_EQ(start, r.start());
    EXPECT_EQ(end, r.end());

    EXPECT_EQ(0x3FFF, r.size());
    EXPECT_TRUE(r.interleaved());
    EXPECT_EQ(ULL(4), r.stripes());
    EXPECT_EQ("[0:0xffff] a[0]^\b=1 a[1]^\b=1", r.to_string());
}

TEST(AddrRangeTest, ComplexInterleavingMasks)
{
    Addr start = 0x0000;
    Addr end   = 0xFFFF;
    std::vector<Addr> masks;
    masks.push_back((1 << 1) | 1);
    masks.push_back((ULL(1) << 63) | (ULL(1) << 62));
    uint8_t intlv_match = 0;

    AddrRange r(start, end, masks, intlv_match);
    EXPECT_TRUE(r.valid());
    EXPECT_EQ(start, r.start());
    EXPECT_EQ(end, r.end());

    EXPECT_EQ(0x3FFF, r.size());
    EXPECT_TRUE(r.interleaved());
    EXPECT_EQ(ULL(4), r.stripes());
    EXPECT_EQ("[0:0xffff] a[0]^a[1]^\b=0 a[62]^a[63]^\b=0", r.to_string());
}

TEST(AddrRangeTest, InterleavingAddressesMergesWith)
{
    Addr start1 = 0x0000;
    Addr end1   = 0xFFFF;
    std::vector<Addr> masks;
    masks.push_back((1 << 29) | (1 << 20) | (1 << 10) | 1);
    masks.push_back((1 << 2));
    uint8_t intlv_match1 = 0;
    AddrRange r1(start1, end1, masks, intlv_match1);

    Addr start2 = 0x0000;
    Addr end2   = 0xFFFF;
    uint8_t intlv_match2 = 1; // intlv_match may differ.
    AddrRange r2(start2, end2, masks, intlv_match2);

    EXPECT_TRUE(r1.mergesWith(r2));
    EXPECT_TRUE(r2.mergesWith(r1));
}

TEST(AddrRangeTest, InterleavingAddressesDoNotMergeWith)
{
    Addr start1 = 0x0000;
    Addr end1   = 0xFFFF;
    std::vector<Addr> masks1;
    masks1.push_back((1 << 29) | (1 << 20) | (1 << 10) | 1);
    masks1.push_back((1 << 2));
    uint8_t intlv_match1 = 0;
    AddrRange r1(start1, end1, masks1, intlv_match1);

    Addr start2 = 0x0000;
    Addr end2   = 0xFFFF;
    std::vector<Addr> masks2;
    masks2.push_back((1 << 29) | (1 << 20) | (1 << 10) | 1);
    masks2.push_back((1 << 3)); // Different mask here.
    uint8_t intlv_match2 = 1; // intlv_match may differ.
    AddrRange r2(start2, end2, masks2, intlv_match2);

    EXPECT_FALSE(r1.mergesWith(r2));
    EXPECT_FALSE(r2.mergesWith(r1));
}

TEST(AddrRangeTest, InterleavingAddressesDoNotIntersect)
{
    /*
     * Range 1: all the odd addresses between 0x0000 and 0xFFFF.
     */
    Addr start1 = 0x0000;
    Addr end1   = 0xFFFF;
    std::vector<Addr> masks1;
    masks1.push_back(1);
    uint8_t intlv_match1 = 1;
    AddrRange r1(start1, end1, masks1, intlv_match1);

    /*
     * Range 2: all the even addresses between 0x0000 and 0xFFFF. These
     * addresses should thereby not intersect.
     */
    Addr start2 = 0x0000;
    Addr end2   = 0xFFFF;
    std::vector<Addr> masks2;
    masks2.push_back(1);
    uint8_t intv_match2 = 0;
    AddrRange r2(start2, end2, masks2, intv_match2);

    EXPECT_FALSE(r1.intersects(r2));
    EXPECT_FALSE(r2.intersects(r1));
}

TEST(AddrRangeTest, InterleavingAddressesIntersectsViaMerging)
{
    Addr start1 = 0x0000;
    Addr end1   = 0xFFFF;
    std::vector<Addr> masks1;
    masks1.push_back((1 << 29) | (1 << 20) | (1 << 10) | 1);
    masks1.push_back((1 << 2));
    uint8_t intlv_match1 = 0;
    AddrRange r1(start1, end1, masks1, intlv_match1);

    Addr start2 = 0x0000;
    Addr end2   = 0xFFFF;
    std::vector<Addr> masks2;
    masks2.push_back((1 << 29) | (1 << 20) | (1 << 10) | 1);
    masks2.push_back((1 << 2));
    uint8_t intlv_match2 = 0;
    AddrRange r2(start2, end2, masks2, intlv_match2);

    EXPECT_TRUE(r1.intersects(r2));
    EXPECT_TRUE(r2.intersects(r1));
}

TEST(AddrRangeTest, InterleavingAddressesDoesNotIntersectViaMerging)
{
    Addr start1 = 0x0000;
    Addr end1   = 0xFFFF;
    std::vector<Addr> masks1;
    masks1.push_back((1 << 29) | (1 << 20) | (1 << 10) | 1);
    masks1.push_back((1 << 2));
    uint8_t intlv_match1 = 0;
    AddrRange r1(start1, end1, masks1, intlv_match1);

    Addr start2 = 0x0000;
    Addr end2   = 0xFFFF;
    std::vector<Addr> masks2;
    masks2.push_back((1 << 29) | (1 << 20) | (1 << 10) | 1);
    masks2.push_back((1 << 2));
    /*
     * These addresses can merge, but their intlv_match values differ. They
     * therefore do not intersect.
     */
    uint8_t intlv_match2 = 1;
    AddrRange r2(start2, end2, masks2, intlv_match2);

    EXPECT_FALSE(r1.intersects(r2));
    EXPECT_FALSE(r2.intersects(r1));
}

/*
 * The following tests were created to test more complex cases where
 * interleaving addresses may intersect. However, the "intersects" function
 * does not cover all cases (a "Cannot test intersection..." exception will
 * be thrown outside of very simple checks to see if an intersection occurs).
 * The tests below accurately test whether two ranges intersect but, for now,
 * code has yet to be implemented to utilize these tests. They are therefore
 * disabled, but may be enabled at a later date if/when the "intersects"
 * function is enhanced.
 */
TEST(AddrRangeTest, DISABLED_InterleavingAddressesIntersect)
{
    /*
     * Range 1: all the odd addresses between 0x0000 and 0xFFFF.
     */
    Addr start1 = 0x0000;
    Addr end1   = 0xFFFF;
    std::vector<Addr> masks1;
    masks1.push_back(1);
    uint8_t intlv_match1 = 0;
    AddrRange r1(start1, end1, masks1, intlv_match1);

    /*
     * Range 2: all the addresses divisible by 4 between 0x0000 and
     * 0xFFFF. These addresses should thereby intersect.
     */
    Addr start2 = 0x0000;
    Addr end2   = 0xFFFF;
    std::vector<Addr> masks2;
    masks2.push_back(1 << 2);
    uint8_t intlv_match2 = 1;
    AddrRange r2(start2, end2, masks2, intlv_match2);

    EXPECT_TRUE(r1.intersects(r2));
    EXPECT_TRUE(r2.intersects(r1));
}

TEST(AddrRangeTest, DISABLED_InterleavingAddressesIntersectsOnOneByteAddress)
{
    /*
     * Range: all the odd addresses between 0x0000 and 0xFFFF.
     */
    Addr start = 0x0000;
    Addr end   = 0xFFFF;
    std::vector<Addr> masks;
    masks.push_back(1);
    uint8_t intlv_match = 1;
    AddrRange r1(start, end, masks, intlv_match);

    AddrRange r2(0x0000, 0x0001);

    EXPECT_FALSE(r1.intersects(r2));
    EXPECT_FALSE(r2.intersects(r1));
}

TEST(AddrRangeTest,
    DISABLED_InterleavingAddressesDoesNotIntersectOnOneByteAddress)
{
    /*
     * Range: all the odd addresses between 0x0000 and 0xFFFF.
     */
    Addr start = 0x0000;
    Addr end   = 0xFFFF;
    std::vector<Addr> masks;
    masks.push_back(1);
    uint8_t intlv_match = 1;
    AddrRange r1(start, end, masks, intlv_match);

    AddrRange r2(0x0001, 0x0002);

    EXPECT_TRUE(r1.intersects(r2));
    EXPECT_TRUE(r2.intersects(r1));
}


/*
 * The following three tests were created to test the addr_range.isSubset
 * function for Interleaving address ranges. However, for now, this
 * functionality has not been implemented. These tests are therefore disabled.
 */
TEST(AddrRangeTest, DISABLED_InterleavingAddressIsSubset)
{
    // Range 1: all the even addresses between 0x0000 and 0xFFFF.
    Addr start1 = 0x0000;
    Addr end1   = 0xFFFF;
    std::vector<Addr> masks1;
    masks1.push_back(1);
    uint8_t intlv_match1 = 0;
    AddrRange r1(start1, end1, masks1, intlv_match1);

    // Range 2: all the even addresses between 0xF000 and 0x0FFF, this is
    // a subset of Range 1.
    Addr start2 = 0xF000;
    Addr end2   = 0x0FFF;
    std::vector<Addr> masks2;
    masks2.push_back(1);
    uint8_t intlv_match2 = 0;
    AddrRange r2(start2, end2, masks2, intlv_match2);

    EXPECT_TRUE(r1.isSubset(r2));
    EXPECT_TRUE(r2.isSubset(r1));
}

TEST(AddrRangeTest, DISABLED_InterleavingAddressIsNotSubset)
{
    //Range 1: all the even addresses between 0x0000 and 0xFFFF.
    Addr start1 = 0x0000;
    Addr end1   = 0xFFFF;
    std::vector<Addr> masks1;
    masks1.push_back(1);
    uint8_t intlv_match1 = 0;
    AddrRange r1(start1, end1, masks1, intlv_match1);


    // Range 2: all the odd addresses between 0xF000 and 0x0FFF, this is
    //a subset of Range 1.
    Addr start2 = 0xF000;
    Addr end2   = 0x0FFF;
    std::vector<Addr> masks2;
    masks2.push_back(1);
    uint8_t intlv_match2 = 1;
    AddrRange r2(start2, end2, masks2, intlv_match2);

    EXPECT_FALSE(r1.isSubset(r2));
    EXPECT_FALSE(r2.isSubset(r1));
}

TEST(AddrRangeTest, DISABLED_InterleavingAddressContains)
{
    /*
     * Range: all the address between 0x0 and 0xFF which have both the 1st
     * and 5th bits 1, or both are 0
     */
    Addr start = 0x00;
    Addr end   = 0xFF;
    std::vector<Addr> masks;
    masks.push_back((1 << 4) | 1);
    uint8_t intlv_match = 0;
    AddrRange r(start, end, masks, intlv_match);

    for (Addr addr = start; addr < end; addr++) {
        if (((addr & 1) && ((1 << 4) & addr)) || // addr[0] && addr[4]
            (!(addr & 1) && !((1 << 4) & addr))) { //!addr[0] && !addr[4]
            EXPECT_TRUE(r.contains(addr));
        } else {
            EXPECT_FALSE(r.contains(addr));
        }
    }
}

TEST(AddrRangeTest, InterleavingAddressAddRemoveInterlvBits)
{
    Addr start = 0x00000;
    Addr end   = 0x10000;
    std::vector<Addr> masks;
    masks.push_back(1);
    uint8_t intlv_match = 1;
    AddrRange r(start, end, masks, intlv_match);

    Addr input = 0xFFFF;
    Addr output = r.removeIntlvBits(input);

    /*
     * The removeIntlvBits function removes the LSB from each mask from the
     * input address. For example, two masks:
     * 00000001 and,
     * 10000100
     * with an input address of:
     * 10101010
     *
     * we would remove bit at position 0, and at position 2, resulting in:
     * 00101011
     *
     * In this test there is is one mask, with a LSB at position 0.
     * Therefore, removing the interleaving bits is equivilant to bitshifting
     * the input to the right.
     */
    EXPECT_EQ(input >> 1, output);

    /*
     * The addIntlvBits function will re-insert bits at the removed locations
     */
    EXPECT_EQ(input, r.addIntlvBits(output));
}

TEST(AddrRangeTest, InterleavingAddressAddRemoveInterlvBitsTwoMasks)
{
    Addr start = 0x00000;
    Addr end   = 0x10000;
    std::vector<Addr> masks;
    masks.push_back((1 << 3) | (1 << 2) | (1 << 1) | 1);
    masks.push_back((1 << 11) | (1 << 10) | (1 << 9) | (1 << 8));
    uint8_t intlv_match = 1;
    AddrRange r(start, end, masks, intlv_match);

    Addr input = (1 << 9) | (1 << 8) | 1;
    /*
     * (1 << 8) and 1 are interleaving bits to be removed.
     */
    Addr output = r.removeIntlvBits(input);

    /*
     * The bit, formally at position 9, is now at 7.
     */
    EXPECT_EQ((1 << 7), output);

    /*
     * Re-adding the interleaving.
     */
    EXPECT_EQ(input, r.addIntlvBits(output));
}

TEST(AddrRangeTest, AddRemoveInterleavBitsAcrossRange)
{
    /*
     * This purpose of this test is to ensure that removing then adding
     * interleaving bits has no net effect.
     * E.g.:
     * addr_range.addIntlvBits(add_range.removeIntlvBits(an_address)) should
     * always return an_address.
     */
    Addr start = 0x00000;
    Addr end   = 0x10000;
    std::vector<Addr> masks;
    masks.push_back(1 << 2);
    masks.push_back(1 << 3);
    masks.push_back(1 << 7);
    masks.push_back(1 << 11);
    uint8_t intlv_match = 0xF;
    AddrRange r(start, end, masks, intlv_match);

    for (Addr i = 0; i < 0xFFF; i++) {
        Addr removedBits = r.removeIntlvBits(i);
        /*
         * As intlv_match = 0xF, all the interleaved bits should be set.
         */
        EXPECT_EQ(i | (1 << 2) | (1 << 3) | (1 << 7) | (1 << 11),
                  r.addIntlvBits(removedBits));
    }
}

TEST(AddrRangeTest, AddRemoveInterleavBitsAcrossContiguousRange)
{
    /*
     * This purpose of this test is to ensure that removing then adding
     * interleaving bits has no net effect.
     * E.g.:
     * addr_range.addIntlvBits(add_range.removeIntlvBits(an_address)) should
     * always return an_address.
     */
    Addr start = 0x00000;
    Addr end   = 0x10000;
    std::vector<Addr> masks;
    masks.push_back(1 << 2);
    masks.push_back(1 << 3);
    masks.push_back(1 << 4);
    uint8_t intlv_match = 0x7;
    AddrRange r(start, end, masks, intlv_match);

    for (Addr i = 0; i < 0xFFF; i++) {
        Addr removedBits = r.removeIntlvBits(i);
        /*
         * As intlv_match = 0x7, all the interleaved bits should be set.
         */
        EXPECT_EQ(i | (1 << 2) | (1 << 3) | (1 << 4),
                  r.addIntlvBits(removedBits));
    }
}

TEST(AddrRangeTest, InterleavingAddressesGetOffset)
{
    Addr start = 0x0002;
    Addr end   = 0xFFFF;
    std::vector<Addr> masks;
    masks.push_back((1 << 4) | (1 << 2));
    uint8_t intlv_match = 0;
    AddrRange r(start, end, masks, intlv_match);

    Addr value = ((1 << 10) | (1 << 9) | (1 <<  8) | (1 << 2) | (1 << 1) | 1);
    Addr value_interleaving_bits_removed =
                            ((1 << 9) | (1 << 8) | (1 << 7) | (1 << 1) | 1);

    Addr expected_output = value_interleaving_bits_removed - start;

    EXPECT_EQ(expected_output, r.getOffset(value));
}

TEST(AddrRangeTest, InterleavingLessThanStartEquals)
{
    Addr start1 = 0x0000FFFF;
    Addr end1   = 0xFFFF0000;
    std::vector<Addr> masks1;
    masks1.push_back((1 << 4) | (1 << 2));
    uint8_t intlv_match1 = 0;
    AddrRange r1(start1, end1, masks1, intlv_match1);

    Addr start2 = 0x0000FFFF;
    Addr end2   = 0x000F0000;
    std::vector<Addr> masks2;
    masks2.push_back((1 << 4) | (1 << 2));
    masks2.push_back((1 << 10));
    uint8_t intlv_match2 = 2;
    AddrRange r2(start2, end2, masks2, intlv_match2);

    /*
     * When The start addresses are equal, the intlv_match values are
     * compared.
     */
    EXPECT_TRUE(r1 < r2);
    EXPECT_FALSE(r2 < r1);
}

TEST(AddrRangeTest, InterleavingLessThanStartNotEquals)
{
    Addr start1 = 0x0000FFFF;
    Addr end1   = 0xFFFF0000;
    std::vector<Addr> masks1;
    masks1.push_back((1 << 4) | (1 << 2));
    uint8_t intlv_match1 = 0;
    AddrRange r1(start1, end1, masks1, intlv_match1);

    Addr start2 = 0x0000FFFE;
    Addr end2   = 0x000F0000;
    std::vector<Addr> masks2;
    masks2.push_back((1 << 4) | (1 << 2));
    masks2.push_back((1 << 10));
    uint8_t intlv_match2 = 2;
    AddrRange r2(start2, end2, masks2, intlv_match2);

    EXPECT_TRUE(r2 < r1);
    EXPECT_FALSE(r1 < r2);
}

TEST(AddrRangeTest, InterleavingEqualTo)
{
    Addr start1 = 0x0000FFFF;
    Addr end1   = 0xFFFF0000;
    std::vector<Addr> masks1;
    masks1.push_back((1 << 4) | (1 << 2));
    uint8_t intlv_match1 = 0;
    AddrRange r1(start1, end1, masks1, intlv_match1);

    Addr start2 = 0x0000FFFF;
    Addr end2   = 0xFFFF0000;
    std::vector<Addr> masks2;
    masks2.push_back((1 << 4) | (1 << 2));
    uint8_t intlv_match2 = 0;
    AddrRange r2(start2, end2, masks2, intlv_match2);

    EXPECT_TRUE(r1 == r2);
}

TEST(AddrRangeTest, InterleavingNotEqualTo)
{
    Addr start1 = 0x0000FFFF;
    Addr end1   = 0xFFFF0000;
    std::vector<Addr> masks1;
    masks1.push_back((1 << 4) | (1 << 2));
    uint8_t intlv_match1 = 0;
    AddrRange r1(start1, end1, masks1, intlv_match1);

    Addr start2 = 0x0000FFFF;
    Addr end2   = 0xFFFF0000;
    std::vector<Addr> masks2;
    masks2.push_back((1 << 4) | (1 << 2));
    masks2.push_back((1 << 10));
    uint8_t intlv_match2 = 2;
    AddrRange r2(start2, end2, masks2, intlv_match2);

    /*
     * These ranges are not equal due to having different masks.
     */
    EXPECT_FALSE(r1 == r2);
}

/*
 * The AddrRange(std::vector<AddrRange>) constructor "merges" the interleaving
 * address ranges. It should be noted that this constructor simply checks that
 * these interleaving addresses can be merged then creates a new address from
 * the start and end addresses of the first address range in the vector.
 */
TEST(AddrRangeTest, MergingInterleavingAddressRanges)
{
    Addr start1 = 0x0000;
    Addr end1   = 0xFFFF;
    std::vector<Addr> masks1;
    masks1.push_back((1 << 4) | (1 << 2));
    uint8_t intlv_match1 = 0;
    AddrRange r1(start1, end1, masks1, intlv_match1);

    Addr start2 = 0x0000;
    Addr end2   = 0xFFFF;
    std::vector<Addr> masks2;
    masks2.push_back((1 << 4) | (1 << 2));
    uint8_t intlv_match2 = 1;
    AddrRange r2(start2, end2, masks2, intlv_match2);

    std::vector<AddrRange> to_merge;
    to_merge.push_back(r1);
    to_merge.push_back(r2);

    AddrRange output(to_merge);

    EXPECT_EQ(0x0000, output.start());
    EXPECT_EQ(0xFFFF, output.end());
    EXPECT_FALSE(output.interleaved());
}

TEST(AddrRangeTest, MergingInterleavingAddressRangesOneRange)
{
    /*
     * In the case where there is just one range in the vector, the merged
     * address range is equal to that range.
     */
    Addr start = 0x0000;
    Addr end   = 0xFFFF;
    std::vector<Addr> masks;
    masks.push_back((1 << 4) | (1 << 2));
    uint8_t intlv_match = 0;
    AddrRange r(start, end, masks, intlv_match);

    std::vector<AddrRange> to_merge;
    to_merge.push_back(r);

    AddrRange output(to_merge);

    EXPECT_EQ(r, output);
}

/*
 * The following tests verify the soundness of the "legacy constructor",
 * AddrRange(Addr, Addr, uint8_t, uint8_t, uint8_t, uint8_t).
 *
 * The address is assumed to contain two ranges; the interleaving bits, and
 * the xor bits. The first two arguments of this constructor specify the
 * start and end addresses. The third argument specifies the MSB of the
 * interleaving bits. The fourth argument specifies the MSB of the xor bits.
 * The firth argument specifies the size (in bits) of the xor and interleaving
 * bits. These cannot overlap. The sixth argument specifies the value the
 * XORing of the xor and interleaving bits should equal to be considered in
 * range.
 *
 * This constructor does a lot of complex translation to migrate this
 * constructor to the masks/intlv_match format.
 */
TEST(AddrRangeTest, LegacyConstructorNoInterleaving)
{
    /*
     * This constructor should create a range with no interleaving.
     */
    AddrRange range(0x0000, 0xFFFF, 0, 0, 0 ,0);
    AddrRange expected(0x0000, 0xFFFF);

    EXPECT_EQ(expected, range);
}

TEST(AddrRangeTest, LegacyConstructorOneBitMask)
{
    /*
     * In this test, the LSB of the address determines whether an address is
     * in range. If even, it's in range, if not, it's out of range. the XOR
     * bit range is not used.
     */
    AddrRange range(0x00000000, 0xFFFFFFFF, 0, 0, 1, 0);

    std::vector<Addr> masks;
    masks.push_back(1);
    AddrRange expected(0x00000000, 0xFFFFFFFF, masks, 0);

    EXPECT_TRUE(expected == range);
}

TEST(AddrRangeTest, LegacyConstructorTwoBitMask)
{
    /*
     * In this test, the two LSBs of the address determines whether an address
     * is in range. If the two are set, the address is in range. The XOR bit
     * range is not used.
     */
    AddrRange range(0x00000000, 0xFFFFFFFF, 1, 0, 2, 3);

    std::vector<Addr> masks;
    masks.push_back(1);
    masks.push_back((1 << 1));
    AddrRange expected(0x00000000, 0xFFFFFFFF, masks, 3);

    EXPECT_TRUE(expected == range);
}

TEST(AddrRangeTest, LegacyConstructorTwoBitMaskWithXOR)
{
    /*
     * In this test, the two LSBs of the address determine wether an address
     * is in range. They are XORed to the 10th and 11th bits in the address.
     * If XORed value is equal to 3, then the address is in range.
     */

    AddrRange range(0x00000000, 0xFFFFFFFF, 1, 11, 2,  3);

    /*
     * The easiest way to ensure this range is correct is to iterate throguh
     * the address range and ensure the correct set of addresses are contained
     * within the range.
     *
     * We start with the xor_mask: a mask to select the 10th and 11th bits.
     */
    Addr xor_mask = (1 << 11) | (1 << 10);
    for (Addr i = 0; i < 0x0000FFFF; i++) {
        // Get xor bits.
        Addr xor_value = (xor_mask & i) >> 10;
        /* If the XOR of xor_bits and the intlv bits (the 0th and 1st bits) is
         * equal to intlv_match (3, i.e., the 0th and 1st bit is set),then the
         * address is within range.
         */
        if (((xor_value ^ i) & 3) == 3) {
            EXPECT_TRUE(range.contains(i));
        } else {
            EXPECT_FALSE(range.contains(i));
        }
    }
}

/*
 * addr_range.hh contains some convenience constructors. The following tests
 * verify they construct AddrRange correctly.
 */
TEST(AddrRangeTest, RangeExConstruction)
{
    AddrRange r = RangeEx(0x6, 0xE);
    EXPECT_EQ(0x6, r.start());
    EXPECT_EQ(0xE, r.end());
}

TEST(AddrRangeTest, RangeInConstruction)
{
    AddrRange r = RangeIn(0x6, 0xE);
    EXPECT_EQ(0x6, r.start());
    EXPECT_EQ(0xF, r.end());
}

TEST(AddrRangeTest, RangeSizeConstruction){
    AddrRange r = RangeSize(0x5, 5);
    EXPECT_EQ(0x5, r.start());
    EXPECT_EQ(0xA, r.end());
}