CPUs have historically instantiated the architecture specific version of the TLBs to avoid a virtual function call, making them a little bit more dependent on what the current ISA is. Some simple performance measurement, the x86 twolf regression on the atomic CPU, shows that there isn't actually any performance benefit, and if anything the simulator goes slightly faster (although still within margin of error) when the TLB functions are virtual. This change switches everything outside of the architectures themselves to use the generic BaseTLB type, and then inside the ISA for them to cast that to their architecture specific type to call into architecture specific interfaces. The ARM TLB needed the most adjustment since it was using non-standard translation function signatures. Specifically, they all took an extra "type" parameter which defaulted to normal, and translateTiming returned a Fault. translateTiming actually doesn't need to return a Fault because everywhere that consumed it just stored it into a structure which it then deleted(?), and the fault is stored in the Translation object when the translation is done. A little more work is needed to fully obviate the arch/tlb.hh header, so the TheISA::TLB type is still visible outside of the ISAs. Specifically, the TlbEntry type is used in the generic PageTable which lives in src/mem. Change-Id: I51b68ee74411f9af778317eff222f9349d2ed575 Reviewed-on: https://gem5-review.googlesource.com/6921 Maintainer: Gabe Black <gabeblack@google.com> Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
652 lines
21 KiB
C++
652 lines
21 KiB
C++
/*
|
|
* Copyright (c) 2011-2012, 2016 ARM Limited
|
|
* Copyright (c) 2013 Advanced Micro Devices, Inc.
|
|
* All rights reserved
|
|
*
|
|
* The license below extends only to copyright in the software and shall
|
|
* not be construed as granting a license to any other intellectual
|
|
* property including but not limited to intellectual property relating
|
|
* to a hardware implementation of the functionality of the software
|
|
* licensed hereunder. You may use the software subject to the license
|
|
* terms below provided that you ensure that this notice is replicated
|
|
* unmodified and in its entirety in all distributions of the software,
|
|
* modified or unmodified, in source code or in binary form.
|
|
*
|
|
* Copyright (c) 2006 The Regents of The University of Michigan
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions are
|
|
* met: redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer;
|
|
* redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution;
|
|
* neither the name of the copyright holders nor the names of its
|
|
* contributors may be used to endorse or promote products derived from
|
|
* this software without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
|
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
|
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
|
|
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
|
|
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
|
|
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
|
|
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
|
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
|
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
|
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
* Authors: Kevin Lim
|
|
*/
|
|
|
|
#ifndef __CPU_THREAD_CONTEXT_HH__
|
|
#define __CPU_THREAD_CONTEXT_HH__
|
|
|
|
#include <iostream>
|
|
#include <string>
|
|
|
|
#include "arch/registers.hh"
|
|
#include "arch/types.hh"
|
|
#include "base/types.hh"
|
|
#include "config/the_isa.hh"
|
|
#include "cpu/reg_class.hh"
|
|
|
|
// @todo: Figure out a more architecture independent way to obtain the ITB and
|
|
// DTB pointers.
|
|
namespace TheISA
|
|
{
|
|
class Decoder;
|
|
}
|
|
class BaseCPU;
|
|
class BaseTLB;
|
|
class CheckerCPU;
|
|
class Checkpoint;
|
|
class EndQuiesceEvent;
|
|
class SETranslatingPortProxy;
|
|
class FSTranslatingPortProxy;
|
|
class PortProxy;
|
|
class Process;
|
|
class System;
|
|
namespace TheISA {
|
|
namespace Kernel {
|
|
class Statistics;
|
|
}
|
|
}
|
|
|
|
/**
|
|
* ThreadContext is the external interface to all thread state for
|
|
* anything outside of the CPU. It provides all accessor methods to
|
|
* state that might be needed by external objects, ranging from
|
|
* register values to things such as kernel stats. It is an abstract
|
|
* base class; the CPU can create its own ThreadContext by either
|
|
* deriving from it, or using the templated ProxyThreadContext.
|
|
*
|
|
* The ThreadContext is slightly different than the ExecContext. The
|
|
* ThreadContext provides access to an individual thread's state; an
|
|
* ExecContext provides ISA access to the CPU (meaning it is
|
|
* implicitly multithreaded on SMT systems). Additionally the
|
|
* ThreadState is an abstract class that exactly defines the
|
|
* interface; the ExecContext is a more implicit interface that must
|
|
* be implemented so that the ISA can access whatever state it needs.
|
|
*/
|
|
class ThreadContext
|
|
{
|
|
protected:
|
|
typedef TheISA::MachInst MachInst;
|
|
typedef TheISA::IntReg IntReg;
|
|
typedef TheISA::FloatReg FloatReg;
|
|
typedef TheISA::FloatRegBits FloatRegBits;
|
|
typedef TheISA::CCReg CCReg;
|
|
typedef TheISA::MiscReg MiscReg;
|
|
using VecRegContainer = TheISA::VecRegContainer;
|
|
using VecElem = TheISA::VecElem;
|
|
public:
|
|
|
|
enum Status
|
|
{
|
|
/// Running. Instructions should be executed only when
|
|
/// the context is in this state.
|
|
Active,
|
|
|
|
/// Temporarily inactive. Entered while waiting for
|
|
/// synchronization, etc.
|
|
Suspended,
|
|
|
|
/// Permanently shut down. Entered when target executes
|
|
/// m5exit pseudo-instruction. When all contexts enter
|
|
/// this state, the simulation will terminate.
|
|
Halted
|
|
};
|
|
|
|
virtual ~ThreadContext() { };
|
|
|
|
virtual BaseCPU *getCpuPtr() = 0;
|
|
|
|
virtual int cpuId() const = 0;
|
|
|
|
virtual uint32_t socketId() const = 0;
|
|
|
|
virtual int threadId() const = 0;
|
|
|
|
virtual void setThreadId(int id) = 0;
|
|
|
|
virtual int contextId() const = 0;
|
|
|
|
virtual void setContextId(int id) = 0;
|
|
|
|
virtual BaseTLB *getITBPtr() = 0;
|
|
|
|
virtual BaseTLB *getDTBPtr() = 0;
|
|
|
|
virtual CheckerCPU *getCheckerCpuPtr() = 0;
|
|
|
|
virtual TheISA::Decoder *getDecoderPtr() = 0;
|
|
|
|
virtual System *getSystemPtr() = 0;
|
|
|
|
virtual TheISA::Kernel::Statistics *getKernelStats() = 0;
|
|
|
|
virtual PortProxy &getPhysProxy() = 0;
|
|
|
|
virtual FSTranslatingPortProxy &getVirtProxy() = 0;
|
|
|
|
/**
|
|
* Initialise the physical and virtual port proxies and tie them to
|
|
* the data port of the CPU.
|
|
*
|
|
* tc ThreadContext for the virtual-to-physical translation
|
|
*/
|
|
virtual void initMemProxies(ThreadContext *tc) = 0;
|
|
|
|
virtual SETranslatingPortProxy &getMemProxy() = 0;
|
|
|
|
virtual Process *getProcessPtr() = 0;
|
|
|
|
virtual void setProcessPtr(Process *p) = 0;
|
|
|
|
virtual Status status() const = 0;
|
|
|
|
virtual void setStatus(Status new_status) = 0;
|
|
|
|
/// Set the status to Active.
|
|
virtual void activate() = 0;
|
|
|
|
/// Set the status to Suspended.
|
|
virtual void suspend() = 0;
|
|
|
|
/// Set the status to Halted.
|
|
virtual void halt() = 0;
|
|
|
|
/// Quiesce thread context
|
|
void quiesce();
|
|
|
|
/// Quiesce, suspend, and schedule activate at resume
|
|
void quiesceTick(Tick resume);
|
|
|
|
virtual void dumpFuncProfile() = 0;
|
|
|
|
virtual void takeOverFrom(ThreadContext *old_context) = 0;
|
|
|
|
virtual void regStats(const std::string &name) = 0;
|
|
|
|
virtual EndQuiesceEvent *getQuiesceEvent() = 0;
|
|
|
|
// Not necessarily the best location for these...
|
|
// Having an extra function just to read these is obnoxious
|
|
virtual Tick readLastActivate() = 0;
|
|
virtual Tick readLastSuspend() = 0;
|
|
|
|
virtual void profileClear() = 0;
|
|
virtual void profileSample() = 0;
|
|
|
|
virtual void copyArchRegs(ThreadContext *tc) = 0;
|
|
|
|
virtual void clearArchRegs() = 0;
|
|
|
|
//
|
|
// New accessors for new decoder.
|
|
//
|
|
virtual uint64_t readIntReg(int reg_idx) = 0;
|
|
|
|
virtual FloatReg readFloatReg(int reg_idx) = 0;
|
|
|
|
virtual FloatRegBits readFloatRegBits(int reg_idx) = 0;
|
|
|
|
virtual const VecRegContainer& readVecReg(const RegId& reg) const = 0;
|
|
virtual VecRegContainer& getWritableVecReg(const RegId& reg) = 0;
|
|
|
|
/** Vector Register Lane Interfaces. */
|
|
/** @{ */
|
|
/** Reads source vector 8bit operand. */
|
|
virtual ConstVecLane8
|
|
readVec8BitLaneReg(const RegId& reg) const = 0;
|
|
|
|
/** Reads source vector 16bit operand. */
|
|
virtual ConstVecLane16
|
|
readVec16BitLaneReg(const RegId& reg) const = 0;
|
|
|
|
/** Reads source vector 32bit operand. */
|
|
virtual ConstVecLane32
|
|
readVec32BitLaneReg(const RegId& reg) const = 0;
|
|
|
|
/** Reads source vector 64bit operand. */
|
|
virtual ConstVecLane64
|
|
readVec64BitLaneReg(const RegId& reg) const = 0;
|
|
|
|
/** Write a lane of the destination vector register. */
|
|
virtual void setVecLane(const RegId& reg,
|
|
const LaneData<LaneSize::Byte>& val) = 0;
|
|
virtual void setVecLane(const RegId& reg,
|
|
const LaneData<LaneSize::TwoByte>& val) = 0;
|
|
virtual void setVecLane(const RegId& reg,
|
|
const LaneData<LaneSize::FourByte>& val) = 0;
|
|
virtual void setVecLane(const RegId& reg,
|
|
const LaneData<LaneSize::EightByte>& val) = 0;
|
|
/** @} */
|
|
|
|
virtual const VecElem& readVecElem(const RegId& reg) const = 0;
|
|
|
|
virtual CCReg readCCReg(int reg_idx) = 0;
|
|
|
|
virtual void setIntReg(int reg_idx, uint64_t val) = 0;
|
|
|
|
virtual void setFloatReg(int reg_idx, FloatReg val) = 0;
|
|
|
|
virtual void setFloatRegBits(int reg_idx, FloatRegBits val) = 0;
|
|
|
|
virtual void setVecReg(const RegId& reg, const VecRegContainer& val) = 0;
|
|
|
|
virtual void setVecElem(const RegId& reg, const VecElem& val) = 0;
|
|
|
|
virtual void setCCReg(int reg_idx, CCReg val) = 0;
|
|
|
|
virtual TheISA::PCState pcState() = 0;
|
|
|
|
virtual void pcState(const TheISA::PCState &val) = 0;
|
|
|
|
void
|
|
setNPC(Addr val)
|
|
{
|
|
TheISA::PCState pc_state = pcState();
|
|
pc_state.setNPC(val);
|
|
pcState(pc_state);
|
|
}
|
|
|
|
virtual void pcStateNoRecord(const TheISA::PCState &val) = 0;
|
|
|
|
virtual Addr instAddr() = 0;
|
|
|
|
virtual Addr nextInstAddr() = 0;
|
|
|
|
virtual MicroPC microPC() = 0;
|
|
|
|
virtual MiscReg readMiscRegNoEffect(int misc_reg) const = 0;
|
|
|
|
virtual MiscReg readMiscReg(int misc_reg) = 0;
|
|
|
|
virtual void setMiscRegNoEffect(int misc_reg, const MiscReg &val) = 0;
|
|
|
|
virtual void setMiscReg(int misc_reg, const MiscReg &val) = 0;
|
|
|
|
virtual RegId flattenRegId(const RegId& regId) const = 0;
|
|
|
|
virtual uint64_t
|
|
readRegOtherThread(const RegId& misc_reg, ThreadID tid)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
virtual void
|
|
setRegOtherThread(const RegId& misc_reg, const MiscReg &val, ThreadID tid)
|
|
{
|
|
}
|
|
|
|
// Also not necessarily the best location for these two. Hopefully will go
|
|
// away once we decide upon where st cond failures goes.
|
|
virtual unsigned readStCondFailures() = 0;
|
|
|
|
virtual void setStCondFailures(unsigned sc_failures) = 0;
|
|
|
|
// Same with st cond failures.
|
|
virtual Counter readFuncExeInst() = 0;
|
|
|
|
virtual void syscall(int64_t callnum, Fault *fault) = 0;
|
|
|
|
// This function exits the thread context in the CPU and returns
|
|
// 1 if the CPU has no more active threads (meaning it's OK to exit);
|
|
// Used in syscall-emulation mode when a thread calls the exit syscall.
|
|
virtual int exit() { return 1; };
|
|
|
|
/** function to compare two thread contexts (for debugging) */
|
|
static void compare(ThreadContext *one, ThreadContext *two);
|
|
|
|
/** @{ */
|
|
/**
|
|
* Flat register interfaces
|
|
*
|
|
* Some architectures have different registers visible in
|
|
* different modes. Such architectures "flatten" a register (see
|
|
* flattenRegId()) to map it into the
|
|
* gem5 register file. This interface provides a flat interface to
|
|
* the underlying register file, which allows for example
|
|
* serialization code to access all registers.
|
|
*/
|
|
|
|
virtual uint64_t readIntRegFlat(int idx) = 0;
|
|
virtual void setIntRegFlat(int idx, uint64_t val) = 0;
|
|
|
|
virtual FloatReg readFloatRegFlat(int idx) = 0;
|
|
virtual void setFloatRegFlat(int idx, FloatReg val) = 0;
|
|
|
|
virtual FloatRegBits readFloatRegBitsFlat(int idx) = 0;
|
|
virtual void setFloatRegBitsFlat(int idx, FloatRegBits val) = 0;
|
|
|
|
virtual const VecRegContainer& readVecRegFlat(int idx) const = 0;
|
|
virtual VecRegContainer& getWritableVecRegFlat(int idx) = 0;
|
|
virtual void setVecRegFlat(int idx, const VecRegContainer& val) = 0;
|
|
|
|
virtual const VecElem& readVecElemFlat(const RegIndex& idx,
|
|
const ElemIndex& elemIdx) const = 0;
|
|
virtual void setVecElemFlat(const RegIndex& idx, const ElemIndex& elemIdx,
|
|
const VecElem& val) = 0;
|
|
|
|
virtual CCReg readCCRegFlat(int idx) = 0;
|
|
virtual void setCCRegFlat(int idx, CCReg val) = 0;
|
|
/** @} */
|
|
|
|
};
|
|
|
|
/**
|
|
* ProxyThreadContext class that provides a way to implement a
|
|
* ThreadContext without having to derive from it. ThreadContext is an
|
|
* abstract class, so anything that derives from it and uses its
|
|
* interface will pay the overhead of virtual function calls. This
|
|
* class is created to enable a user-defined Thread object to be used
|
|
* wherever ThreadContexts are used, without paying the overhead of
|
|
* virtual function calls when it is used by itself. See
|
|
* simple_thread.hh for an example of this.
|
|
*/
|
|
template <class TC>
|
|
class ProxyThreadContext : public ThreadContext
|
|
{
|
|
public:
|
|
ProxyThreadContext(TC *actual_tc)
|
|
{ actualTC = actual_tc; }
|
|
|
|
private:
|
|
TC *actualTC;
|
|
|
|
public:
|
|
|
|
BaseCPU *getCpuPtr() { return actualTC->getCpuPtr(); }
|
|
|
|
int cpuId() const { return actualTC->cpuId(); }
|
|
|
|
uint32_t socketId() const { return actualTC->socketId(); }
|
|
|
|
int threadId() const { return actualTC->threadId(); }
|
|
|
|
void setThreadId(int id) { actualTC->setThreadId(id); }
|
|
|
|
int contextId() const { return actualTC->contextId(); }
|
|
|
|
void setContextId(int id) { actualTC->setContextId(id); }
|
|
|
|
BaseTLB *getITBPtr() { return actualTC->getITBPtr(); }
|
|
|
|
BaseTLB *getDTBPtr() { return actualTC->getDTBPtr(); }
|
|
|
|
CheckerCPU *getCheckerCpuPtr() { return actualTC->getCheckerCpuPtr(); }
|
|
|
|
TheISA::Decoder *getDecoderPtr() { return actualTC->getDecoderPtr(); }
|
|
|
|
System *getSystemPtr() { return actualTC->getSystemPtr(); }
|
|
|
|
TheISA::Kernel::Statistics *getKernelStats()
|
|
{ return actualTC->getKernelStats(); }
|
|
|
|
PortProxy &getPhysProxy() { return actualTC->getPhysProxy(); }
|
|
|
|
FSTranslatingPortProxy &getVirtProxy() { return actualTC->getVirtProxy(); }
|
|
|
|
void initMemProxies(ThreadContext *tc) { actualTC->initMemProxies(tc); }
|
|
|
|
SETranslatingPortProxy &getMemProxy() { return actualTC->getMemProxy(); }
|
|
|
|
Process *getProcessPtr() { return actualTC->getProcessPtr(); }
|
|
|
|
void setProcessPtr(Process *p) { actualTC->setProcessPtr(p); }
|
|
|
|
Status status() const { return actualTC->status(); }
|
|
|
|
void setStatus(Status new_status) { actualTC->setStatus(new_status); }
|
|
|
|
/// Set the status to Active.
|
|
void activate() { actualTC->activate(); }
|
|
|
|
/// Set the status to Suspended.
|
|
void suspend() { actualTC->suspend(); }
|
|
|
|
/// Set the status to Halted.
|
|
void halt() { actualTC->halt(); }
|
|
|
|
/// Quiesce thread context
|
|
void quiesce() { actualTC->quiesce(); }
|
|
|
|
/// Quiesce, suspend, and schedule activate at resume
|
|
void quiesceTick(Tick resume) { actualTC->quiesceTick(resume); }
|
|
|
|
void dumpFuncProfile() { actualTC->dumpFuncProfile(); }
|
|
|
|
void takeOverFrom(ThreadContext *oldContext)
|
|
{ actualTC->takeOverFrom(oldContext); }
|
|
|
|
void regStats(const std::string &name) { actualTC->regStats(name); }
|
|
|
|
EndQuiesceEvent *getQuiesceEvent() { return actualTC->getQuiesceEvent(); }
|
|
|
|
Tick readLastActivate() { return actualTC->readLastActivate(); }
|
|
Tick readLastSuspend() { return actualTC->readLastSuspend(); }
|
|
|
|
void profileClear() { return actualTC->profileClear(); }
|
|
void profileSample() { return actualTC->profileSample(); }
|
|
|
|
// @todo: Do I need this?
|
|
void copyArchRegs(ThreadContext *tc) { actualTC->copyArchRegs(tc); }
|
|
|
|
void clearArchRegs() { actualTC->clearArchRegs(); }
|
|
|
|
//
|
|
// New accessors for new decoder.
|
|
//
|
|
uint64_t readIntReg(int reg_idx)
|
|
{ return actualTC->readIntReg(reg_idx); }
|
|
|
|
FloatReg readFloatReg(int reg_idx)
|
|
{ return actualTC->readFloatReg(reg_idx); }
|
|
|
|
FloatRegBits readFloatRegBits(int reg_idx)
|
|
{ return actualTC->readFloatRegBits(reg_idx); }
|
|
|
|
const VecRegContainer& readVecReg(const RegId& reg) const
|
|
{ return actualTC->readVecReg(reg); }
|
|
|
|
VecRegContainer& getWritableVecReg(const RegId& reg)
|
|
{ return actualTC->getWritableVecReg(reg); }
|
|
|
|
/** Vector Register Lane Interfaces. */
|
|
/** @{ */
|
|
/** Reads source vector 8bit operand. */
|
|
ConstVecLane8
|
|
readVec8BitLaneReg(const RegId& reg) const
|
|
{ return actualTC->readVec8BitLaneReg(reg); }
|
|
|
|
/** Reads source vector 16bit operand. */
|
|
ConstVecLane16
|
|
readVec16BitLaneReg(const RegId& reg) const
|
|
{ return actualTC->readVec16BitLaneReg(reg); }
|
|
|
|
/** Reads source vector 32bit operand. */
|
|
ConstVecLane32
|
|
readVec32BitLaneReg(const RegId& reg) const
|
|
{ return actualTC->readVec32BitLaneReg(reg); }
|
|
|
|
/** Reads source vector 64bit operand. */
|
|
ConstVecLane64
|
|
readVec64BitLaneReg(const RegId& reg) const
|
|
{ return actualTC->readVec64BitLaneReg(reg); }
|
|
|
|
/** Write a lane of the destination vector register. */
|
|
virtual void setVecLane(const RegId& reg,
|
|
const LaneData<LaneSize::Byte>& val)
|
|
{ return actualTC->setVecLane(reg, val); }
|
|
virtual void setVecLane(const RegId& reg,
|
|
const LaneData<LaneSize::TwoByte>& val)
|
|
{ return actualTC->setVecLane(reg, val); }
|
|
virtual void setVecLane(const RegId& reg,
|
|
const LaneData<LaneSize::FourByte>& val)
|
|
{ return actualTC->setVecLane(reg, val); }
|
|
virtual void setVecLane(const RegId& reg,
|
|
const LaneData<LaneSize::EightByte>& val)
|
|
{ return actualTC->setVecLane(reg, val); }
|
|
/** @} */
|
|
|
|
const VecElem& readVecElem(const RegId& reg) const
|
|
{ return actualTC->readVecElem(reg); }
|
|
|
|
CCReg readCCReg(int reg_idx)
|
|
{ return actualTC->readCCReg(reg_idx); }
|
|
|
|
void setIntReg(int reg_idx, uint64_t val)
|
|
{ actualTC->setIntReg(reg_idx, val); }
|
|
|
|
void setFloatReg(int reg_idx, FloatReg val)
|
|
{ actualTC->setFloatReg(reg_idx, val); }
|
|
|
|
void setFloatRegBits(int reg_idx, FloatRegBits val)
|
|
{ actualTC->setFloatRegBits(reg_idx, val); }
|
|
|
|
void setVecReg(const RegId& reg, const VecRegContainer& val)
|
|
{ actualTC->setVecReg(reg, val); }
|
|
|
|
void setVecElem(const RegId& reg, const VecElem& val)
|
|
{ actualTC->setVecElem(reg, val); }
|
|
|
|
void setCCReg(int reg_idx, CCReg val)
|
|
{ actualTC->setCCReg(reg_idx, val); }
|
|
|
|
TheISA::PCState pcState() { return actualTC->pcState(); }
|
|
|
|
void pcState(const TheISA::PCState &val) { actualTC->pcState(val); }
|
|
|
|
void pcStateNoRecord(const TheISA::PCState &val) { actualTC->pcState(val); }
|
|
|
|
Addr instAddr() { return actualTC->instAddr(); }
|
|
Addr nextInstAddr() { return actualTC->nextInstAddr(); }
|
|
MicroPC microPC() { return actualTC->microPC(); }
|
|
|
|
bool readPredicate() { return actualTC->readPredicate(); }
|
|
|
|
void setPredicate(bool val)
|
|
{ actualTC->setPredicate(val); }
|
|
|
|
MiscReg readMiscRegNoEffect(int misc_reg) const
|
|
{ return actualTC->readMiscRegNoEffect(misc_reg); }
|
|
|
|
MiscReg readMiscReg(int misc_reg)
|
|
{ return actualTC->readMiscReg(misc_reg); }
|
|
|
|
void setMiscRegNoEffect(int misc_reg, const MiscReg &val)
|
|
{ return actualTC->setMiscRegNoEffect(misc_reg, val); }
|
|
|
|
void setMiscReg(int misc_reg, const MiscReg &val)
|
|
{ return actualTC->setMiscReg(misc_reg, val); }
|
|
|
|
RegId flattenRegId(const RegId& regId) const
|
|
{ return actualTC->flattenRegId(regId); }
|
|
|
|
unsigned readStCondFailures()
|
|
{ return actualTC->readStCondFailures(); }
|
|
|
|
void setStCondFailures(unsigned sc_failures)
|
|
{ actualTC->setStCondFailures(sc_failures); }
|
|
|
|
void syscall(int64_t callnum, Fault *fault)
|
|
{ actualTC->syscall(callnum, fault); }
|
|
|
|
Counter readFuncExeInst() { return actualTC->readFuncExeInst(); }
|
|
|
|
uint64_t readIntRegFlat(int idx)
|
|
{ return actualTC->readIntRegFlat(idx); }
|
|
|
|
void setIntRegFlat(int idx, uint64_t val)
|
|
{ actualTC->setIntRegFlat(idx, val); }
|
|
|
|
FloatReg readFloatRegFlat(int idx)
|
|
{ return actualTC->readFloatRegFlat(idx); }
|
|
|
|
void setFloatRegFlat(int idx, FloatReg val)
|
|
{ actualTC->setFloatRegFlat(idx, val); }
|
|
|
|
FloatRegBits readFloatRegBitsFlat(int idx)
|
|
{ return actualTC->readFloatRegBitsFlat(idx); }
|
|
|
|
void setFloatRegBitsFlat(int idx, FloatRegBits val)
|
|
{ actualTC->setFloatRegBitsFlat(idx, val); }
|
|
|
|
const VecRegContainer& readVecRegFlat(int id) const
|
|
{ return actualTC->readVecRegFlat(id); }
|
|
|
|
VecRegContainer& getWritableVecRegFlat(int id)
|
|
{ return actualTC->getWritableVecRegFlat(id); }
|
|
|
|
void setVecRegFlat(int idx, const VecRegContainer& val)
|
|
{ actualTC->setVecRegFlat(idx, val); }
|
|
|
|
const VecElem& readVecElemFlat(const RegIndex& id,
|
|
const ElemIndex& elemIndex) const
|
|
{ return actualTC->readVecElemFlat(id, elemIndex); }
|
|
|
|
void setVecElemFlat(const RegIndex& id, const ElemIndex& elemIndex,
|
|
const VecElem& val)
|
|
{ actualTC->setVecElemFlat(id, elemIndex, val); }
|
|
|
|
CCReg readCCRegFlat(int idx)
|
|
{ return actualTC->readCCRegFlat(idx); }
|
|
|
|
void setCCRegFlat(int idx, CCReg val)
|
|
{ actualTC->setCCRegFlat(idx, val); }
|
|
};
|
|
|
|
/** @{ */
|
|
/**
|
|
* Thread context serialization helpers
|
|
*
|
|
* These helper functions provide a way to the data in a
|
|
* ThreadContext. They are provided as separate helper function since
|
|
* implementing them as members of the ThreadContext interface would
|
|
* be confusing when the ThreadContext is exported via a proxy.
|
|
*/
|
|
|
|
void serialize(ThreadContext &tc, CheckpointOut &cp);
|
|
void unserialize(ThreadContext &tc, CheckpointIn &cp);
|
|
|
|
/** @} */
|
|
|
|
|
|
/**
|
|
* Copy state between thread contexts in preparation for CPU handover.
|
|
*
|
|
* @note This method modifies the old thread contexts as well as the
|
|
* new thread context. The old thread context will have its quiesce
|
|
* event descheduled if it is scheduled and its status set to halted.
|
|
*
|
|
* @param new_tc Destination ThreadContext.
|
|
* @param old_tc Source ThreadContext.
|
|
*/
|
|
void takeOverFrom(ThreadContext &new_tc, ThreadContext &old_tc);
|
|
|
|
#endif
|