The default MTYPE initialization in the emulated GPU driver is currently
doing a bitwise AND on an input integer param with other integers
instead of using a bitmask. Change this to use bitset and test the bit
positions corresponding to the values in the MTYPE enum that were
previously being used as an operand for bitwise AND.
This was causing invalid slicc transitions in some benchmarks for
combinations of request type and mtype that are undefined.
Change-Id: I93fee0eae1fff7141cd14c239c16d1d69925d08d
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/56367
Reviewed-by: Matt Sinclair <mattdsinclair@gmail.com>
Maintainer: Matt Sinclair <mattdsinclair@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Remove the line "For use for simulation and test purposes only" in files
were AMD is the only copyright holder listed in the header. This happens
to be the case for all files where this line exists, removing it
completely from gem5.
Change-Id: I623f266b002f564301b28774f49081099cfc60fd
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/53943
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
This patch adds support for a gfx902 Vega APU, ripping the
appropriate values for device_id from the ROCm Thunk
(src/topology.c).
Note: gfx902 isn't officially supported by ROCm. This
means that it may not work for all programs. In particular,
rocBLAS is incompatible with gfx902, so anything that uses
rocBLAS won't be able to run with gfx902.
Change-Id: I48893e7cc9c7e52275fdfd22314f371a9db8e90a
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/47530
Reviewed-by: Matt Sinclair <mattdsinclair@gmail.com>
Reviewed-by: Matthew Poremba <matthew.poremba@amd.com>
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Maintainer: Matt Sinclair <mattdsinclair@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
The apertures for non-gfx801 GPUs are set differently.
If the apertures aren't set properly, ROCm will error out.
This change sets the apertures appropriately based on the
gfx version of the simulated GPU. It also adds in new
functions to set the scratch and lds apertures in GFX9 to mimic
the linux kernel.
Change-Id: I1fa6f60bc20c7b6eb3896057841d96846460a9f8
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/47529
Reviewed-by: Matt Sinclair <mattdsinclair@gmail.com>
Reviewed-by: Matthew Poremba <matthew.poremba@amd.com>
Maintainer: Matt Sinclair <mattdsinclair@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Apply the gem5 namespace to the codebase.
Some anonymous namespaces could theoretically be removed,
but since this change's main goal was to keep conflicts
at a minimum, it was decided not to modify much the
general shape of the files.
A few missing comments of the form "// namespace X" that
occurred before the newly added "} // namespace gem5"
have been added for consistency.
std out should not be included in the gem5 namespace, so
they weren't.
ProtoMessage has not been included in the gem5 namespace,
since I'm not familiar with how proto works.
Regarding the SystemC files, although they belong to gem5,
they actually perform integration between gem5 and SystemC;
therefore, it deserved its own separate namespace.
Files that are automatically generated have been included
in the gem5 namespace.
The .isa files currently are limited to a single namespace.
This limitation should be later removed to make it easier
to accomodate a better API.
Regarding the files in util, gem5:: was prepended where
suitable. Notice that this patch was tested as much as
possible given that most of these were already not
previously compiling.
Change-Id: Ia53d404ec79c46edaa98f654e23bc3b0e179fe2d
Signed-off-by: Daniel R. Carvalho <odanrc@yahoo.com.br>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/46323
Maintainer: Bobby R. Bruce <bbruce@ucdavis.edu>
Reviewed-by: Bobby R. Bruce <bbruce@ucdavis.edu>
Reviewed-by: Matthew Poremba <matthew.poremba@amd.com>
Tested-by: kokoro <noreply+kokoro@google.com>
GPU MTYPE is currently set using a global config passed to the
PACoalescer. This patch enables MTYPE to be set by the shader on a
per-request bases. In real hardware, the MTYPE is extracted from a
GPUVM PTE during address translation. However, our current simulator
only models x86 page tables which do not have the appropriate bits for
GPU MTYPES. Rather than hacking non-x86 bits into our x86 page table
models, this patch instead keeps an interval tree of all pages that
request custom MTYPES in the driver itself. This is currently
only used to map host pages to the GPU as uncacheable, but is easily
extensible to other MTYPES.
Change-Id: I7daab0ffae42084b9131a67c85cd0aa4bbbfc8d6
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/42216
Maintainer: Matthew Poremba <matthew.poremba@amd.com>
Reviewed-by: Matt Sinclair <mattdsinclair@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
New topology ripped from Fiji to support dGPU. A dGPU flag is added to
the config which is propogated to the driver. The emulated driver is
now able to properly deal with dGPU ioctls and mmaps. For now, dGPU
physical memory is allocated from the host, but this is easy to change
once we get a GPU memory controller up and running.
Change-Id: I594418482b12ec8fb2e4018d8d0371d56f4f51c8
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/42214
Reviewed-by: Matt Sinclair <mattdsinclair@gmail.com>
Maintainer: Matt Sinclair <mattdsinclair@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Event creation and management support from emulated drivers is required
to support interruptible signals in HSA and this support was not
available. This changeset adds the event creation and management support
in the emulated driver. With this patch, each interruptible signal
created by the HSA runtime is associated with a signal event. The HSA
runtime can then put a thread waiting on a signal condition to sleep
asking the driver to monitor the event associated with that signal. If
the signal is modified by the GPU, the dispatcher notifies the driver
about signal value change. If the modifier is a CPU thread, the thread
will have to make HSA API calls to modify the signal and these API calls
will notify the driver about signal value change. Once the driver is
notified about a change in the signal value, the driver checks to see if
any thread is sleeping on that signal and wake up the sleeping thread
associated with that event. The driver has also implemented the time_out
wakeup that can wake up the thread after a certain time period has
expired. This is also true for barrier packets.
Each signal has an event address in a kernel managed and allocated
event page that can be used as a mailbox pointer to notify an event.
However, this feature used by non-CPU agents to communicate with the
driver is not implemented by this changeset because the non-CPU HSA
agents in our model can directly communicate with driver in our
implementation. Having said that, adding that feature should be trivial
because the event address and event pages are correctly setup by this
changeset and just adding the event page's virtual address to our PIO
doorbell interface in the page tables and registering that pio address
to the driver should be sufficient. Managing mailbox pointer for an
event is based on event ID and using this event ID as an index into
event page, this changeset already provides a unique mailbox pointer for
each event.
Change-Id: Ic62794076ddd47526b1f952fdb4c1bad632bdd2e
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/38335
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Reviewed-by: Matt Sinclair <mattdsinclair@gmail.com>
Maintainer: Matt Sinclair <mattdsinclair@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
The create() method on Params structs usually instantiate SimObjects
using a constructor which takes the Params struct as a parameter
somehow. There has been a lot of needless variation in how that was
done, making it annoying to pass Params down to base classes. Some of
the different forms were:
const Params &
Params &
Params *
const Params *
Params const*
This change goes through and fixes up every constructor and every
create() method to use the const Params & form. We use a reference
because the Params struct should never be null. We use const because
neither the create method nor the consuming object should modify the
record of the parameters as they came in from the config. That would
make consuming them not idempotent, and make it impossible to tell what
the actual simulation configuration was since it would change from any
user visible form (config script, config.ini, dot pdf output).
Change-Id: I77453cba52fdcfd5f4eec92dfb0bddb5a9945f31
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/35938
Reviewed-by: Gabe Black <gabeblack@google.com>
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Maintainer: Gabe Black <gabeblack@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>
