pybind11 gives us a simple way to set up sys.argv when initializing the
python interpreter, but we need to set that up even if the python
interpreter is already running. We need to do that manually, which we do
like gem5's main() used to.
Change-Id: If9b79a80e05158226d13f68bf06a2a98a36c2602
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/54310
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
In the SST integration the top of the main queue is checked
for an event before starting the simulation.
If the first event is scheduled after the ending tick, we are
just returning the simulate_limit_event without entering
the simulation loop.
If the method is called with an empty queue, the following
line will segfault (getHead() == nullptr):
gem5::mainEventQueue[0]->getHead()->when()
With this patch we are covering the case where we have
an empty event queue
Change-Id: I04463b45b269361172a9dd2fe1ba6e9428ac64f5
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/53723
Reviewed-by: Hoa Nguyen <hoanguyen@ucdavis.edu>
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Currently, the installation instructions are for installing
SST-core and SST-elements version 11.0.0. This change updates
instructions to the current SST-core and SST-element version,
11.1.0.
This change also reflects that manually downloading the
`bbl-busybox-boot-exit` is no longer necessary as the example
gem5 config will download automatically.
Change-Id: I616ca38316213dcbd71b6eab121b5ac89eed1962
Signed-off-by: Hoa Nguyen <hoanguyen@ucdavis.edu>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/53463
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Enable a gem5 system to be an SST::Component.
This change includes,
- SST::gem5Component: responsible for,
- initializing the Python environment for gem5
- instantiating gem5 SimObjects
- connecting SST::SSTResponderSubComponent to
gem5::OutgoingRequestBridge
- hanlding the gem5 event queue (no thread-synchronization)
- handling executing gem5 events
- SST::SSTResponderSubComponent: responsible for,
- receiving gem5 requests and sending the requests to
memory.
- sending responses to the corresponding
gem5::OutgoingRequestBridge.
- SST::SSTResponder: owned by SSTResponderSubComponent, the
actual actor that sends gem5's requests to memory.
- gem5::OutgoingRequestBridge: receives the requests from
gem5 and sends them to SST. This SimObject allows the initialization
requests to be cached and the receiver could query the
initialization data later on.
- gem5::SSTResponderInterface: the interface specifying how SST
communicates with gem5.
- A working example of a gem5/SST setup.
More information is available at ext/sst/README.md.
For installation instructions, please refer to ext/sst/INSTALL.md.
Change-Id: I6b81260ef825415bcfe72b8a078854f4c94de782
Signed-off-by: Hoa Nguyen <hoanguyen@ucdavis.edu>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/50468
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Bobby R. Bruce <bbruce@ucdavis.edu>
Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>
This adds multi-mode support for remote debugging via GDB
with the addition of the XML target description files for
both 32-bit and 64-bit variants of the Power architecture.
Proper byte order conversions have also been added.
MSR has now been modeled to some extent but it is still
not exposed by getRegs() since its a privileged register
that cannot be modified from userspace. Similarly, the
target descriptions require FPSCR to also be part of the
payload and hence, it has been added too.
Change-Id: I156fdccb791f161959dbb2c3dd8ab1e510d9cd4b
Signed-off-by: Sandipan Das <sandipan@linux.ibm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/40946
Reviewed-by: Boris Shingarov <shingarov@labware.com>
Maintainer: Boris Shingarov <shingarov@labware.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Apply the gem5 namespace to the codebase.
Some anonymous namespaces could theoretically be removed,
but since this change's main goal was to keep conflicts
at a minimum, it was decided not to modify much the
general shape of the files.
A few missing comments of the form "// namespace X" that
occurred before the newly added "} // namespace gem5"
have been added for consistency.
std out should not be included in the gem5 namespace, so
they weren't.
ProtoMessage has not been included in the gem5 namespace,
since I'm not familiar with how proto works.
Regarding the SystemC files, although they belong to gem5,
they actually perform integration between gem5 and SystemC;
therefore, it deserved its own separate namespace.
Files that are automatically generated have been included
in the gem5 namespace.
The .isa files currently are limited to a single namespace.
This limitation should be later removed to make it easier
to accomodate a better API.
Regarding the files in util, gem5:: was prepended where
suitable. Notice that this patch was tested as much as
possible given that most of these were already not
previously compiling.
Change-Id: Ia53d404ec79c46edaa98f654e23bc3b0e179fe2d
Signed-off-by: Daniel R. Carvalho <odanrc@yahoo.com.br>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/46323
Maintainer: Bobby R. Bruce <bbruce@ucdavis.edu>
Reviewed-by: Bobby R. Bruce <bbruce@ucdavis.edu>
Reviewed-by: Matthew Poremba <matthew.poremba@amd.com>
Tested-by: kokoro <noreply+kokoro@google.com>
This was incorrectly kept as `http://dist.gem5.org/dist/develop` in the
v21.0.0 release of gem5. The `dist/develop` directory is used by the
develop branch, not by gem5 releases. This change updates the URL to
point towards the currect v21-0 branch, which will remain stable and
contain resoruces always compatible with the v21-0 release.
Change-Id: I5d9a9497cebffa91f08be253f1637e11e0d5e62c
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/44725
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
This has two purposes. First, SCons assumes that once you call
Configure, you won't set up the environment the Configure is based on
until after you get the environment back from it again with
conf.Finish(). We get away with this when the cache mode for config
tests is not "force", since Configure just reuses the environment we
pass in, and any changes we make are immediately communicated between
the two.
If the cache mode *is* "force" though, SCons modifies the decider so
that everything the conf environment goes to build looks like it's out
of date. It does that by cloning the original environment, and then
using that clone to do its tests. That causes a problem because we have
a long lived "conf" object and make further changes to main, and since
the two environments are now separate the one in conf doesn't see those
updates.
Second, and more subtly, we export our "main" and "env" environments so
that other SConsopts and SConscript files can use them and define things
in them. The way Configure is designed, if the config caching mode is
"force", then it will create a new environment, and then that
environment will replace what the, for instance, "main" variable points
to when "main = conf.Finish()" is executed.
Unfortunately, if we've already Export()-ed main, we've exported what
the "main" variable pointed to at that time. Our view of "main" will
track with the value that conf.Finish() returned, but since that
construction environment is mearly derived from the main we Exported and
not actually the same thing, they have diverged at that point and will
behave independently.
To solve both of these problems, this change modifies the
gem5_scons.Configure() method so that it's a context manager instead of
a regular function. As before, it will call Configure for us and create
a configuration context, which it will yield as the "with" value. When
the context exits, all the variables in the context Finish() returns
will be shoved back into the original context with Replace(). This isn't
perfect since variables which were deleted in the environment (probably
very rare in practice) will not exist and so will not overwrite the
still existent variable in the original dict.
This has several advantages. The environment never splits into two
copies which continue on independently. It makes the lifetime of a
configuration context short, which is good because behavior during that
time is tricky and unintuitive. It also makes the scope of the context
very clear, so that you won't miss the fact that you're in a special
setting and need to pay attention to what environment you're modifying.
Also, this keeps the conceptual overhead of configuration localized to
where the configuration is happening. In parts of the SConscripts which
are not doing anything with conf, etc, they don't have to modify their
behavior since no configuration context is active.
This change is based on this change from Hanhwi Jang who identified this
problem and proposed an initial solution:
https://gem5-review.googlesource.com/c/public/gem5/+/44265
Change-Id: Iae0a292d6b375c5da98619f31392ca1de6216fcd
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/44389
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Reviewed-by: Hanhwi Jang <jang.hanhwi@gmail.com>
Maintainer: Bobby R. Bruce <bbruce@ucdavis.edu>
Tested-by: kokoro <noreply+kokoro@google.com>
An expression in that library intended to create a bitmask by checking
if a bit should be set, and then using ?: to select between a bitmask
with that bit, or 0. Unfortunately | is higher precedence than ?:, and
so 0 would be |-ed with the condition of the next ?: instead. This CL
fixes the bug by adding some parenthesis.
Change-Id: Ib7e06f261e07a6ad00b9a96939d07b64c3a50409
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/40954
Reviewed-by: Gabe Black <gabe.black@gmail.com>
Maintainer: Gabe Black <gabe.black@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
This is in the Accellera version of systemc, used when gem5 is built
into systemc as a black box. std::gets was depdecated in c++11, and
removed entirely in c++14. Since gem5 has moved to c++14, this can't be
brought in with "using" in that header. More recent versions of systemc
from Accellera may have this fixed, and it's pretty bad practice to have
a universal header file squash unrelated namespaces like that in the
first place.
Rather tha update all of this copy of systemc, this change just makes
the smallest adjustment possible to get things to work again.
Change-Id: I8a95665d4b5d49ffc014097714cf2e602bf9b937
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/42583
Reviewed-by: Bobby R. Bruce <bbruce@ucdavis.edu>
Maintainer: Bobby R. Bruce <bbruce@ucdavis.edu>
Tested-by: kokoro <noreply+kokoro@google.com>
We currently run regressions with the following command line
./main.py run [...] <directory>
Where <directory> is the positional argument pointing to the tests root
directory: Testlib will walk through the directory and load every
testsuite it encounters in its path.
./main.py run [...] <directory1> <directory2> ...
Allowing testlib to load tests from multiple directories will make it
possible to load out of tree regressions (living in an EXTRAS repository
for example)
JIRA: https://gem5.atlassian.net/browse/GEM5-905
Change-Id: I802d8753a18f4dfb00347252f031b5438e9be672
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/40136
Reviewed-by: Bobby R. Bruce <bbruce@ucdavis.edu>
Maintainer: Bobby R. Bruce <bbruce@ucdavis.edu>
Tested-by: kokoro <noreply+kokoro@google.com>
This should help reduce warning spew when building with newer compilers.
The pybind11::module type has been renamed pybind11::module_ to avoid
conflicts with c++20 modules, according to the pybind11 changelog, so
this CL also updates gem5 source to use the new type. There is
supposedly an alias pybind11::module which is for compatibility, but we
still get linker errors without changing to pybind11::module_.
Change-Id: I0acb36215b33e3a713866baec43f5af630c356ee
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/40255
Maintainer: Bobby R. Bruce <bbruce@ucdavis.edu>
Reviewed-by: Bobby R. Bruce <bbruce@ucdavis.edu>
Tested-by: kokoro <noreply+kokoro@google.com>
Note:
Some less frequently needed CSR registers (e.g. hpm and pmp registers)
are commented out on purpose. Instructions to add them back are
described in remote_gdb.hh comments. This is to avoid spamming the
remote GDB log when using `info reg all`.
Changes:
1. Added GDB XML files to the ext/ directory (mostly from QEMU)
2. Modified RiscvGdbRegCache
- struct r: added CSR registers
- getRegs, setRegs: reading / setting CSR registers
3. Modified RemoteGDB
- availableFeatures: indicate support for XML registers
- getXferFeaturesRead: return XML blobs
Change-Id: Ica03b63edb3f0c9b6a7789228b995891dbfb26b2
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/38955
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
The log_call helper is now accepting a time parameter (dictionary). If
the param is not None, the function will fill the timing indications
(user and system time) for the TestCase.
There are some TestCases whose user time is not of our interest; for
example we don't really care about the cpu time of a stdout diff
(MatchStdout tests). In those cases the resulting cpu time in the
generated JUnit file (results.xml) will be 0.
JIRA: https://gem5.atlassian.net/browse/GEM5-548
Change-Id: I53c1b59f8ad93900aeac06197e39189c00a9053c
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/32653
Tested-by: kokoro <noreply+kokoro@google.com>
Added utility class `TimedWaitPID` which monkey-patches os.waitpid()
with a functor that has the same signature, but calls os.wait4()
instead. This allows the process's user and system CPU time to be
obtained from the OS when using APIs (such as subprocess) which use
os.waitpid() internally.
The process CPU time is stored within the functor and can be read back
later by calling TimedWaitPID.get_time_for_pid().
JIRA: https://gem5.atlassian.net/browse/GEM5-548
Change-Id: I9ebe9ca1241a4f28c90ad31f672f32ac52786664
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/32652
Maintainer: Bobby R. Bruce <bbruce@ucdavis.edu>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Hoa Nguyen <hoanguyen@ucdavis.edu>
