When handling a system call, external code would call Process::syscall
which would extract the syscall number, that would call the base
class' doSyscall method, that would call into the subclass' getDesc
to get the appropriate descriptor, and then doSyscall would check
that a syscall was found and call into it.
Instead, we can just make the SyscallDescTable optionally check for
missing syscalls (in case we want to check multiple tables), and
make syscall look up the appropriate descriptor and call it. The base
implementation of syscall would then do the only bit of doSyscall that
is no longer being handled, incrementing the numSyscalls stat.
Change-Id: If102c156830ed2997d177dc6937cc85dddadf3f9
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/24119
Tested-by: kokoro <noreply+kokoro@google.com>
Tested-by: Gem5 Cloud Project GCB service account <345032938727@cloudbuild.gserviceaccount.com>
Maintainer: Gabe Black <gabeblack@google.com>
Reviewed-by: Bobby R. Bruce <bbruce@ucdavis.edu>
Also add the syscall number into the SyscallDesc class.
The common table structure is basically just a map that extracts its
key value from the SyscallDesc class using a new num() accessor. By
using a map instead of an array (like RISCV was already doing), it's
easy to support gaps of arbitrary size and non-zero offsets of groups
of system calls without lots of filler or additional logic. This
simplified the ARM system call tables in particular which had a lot
of filler entries.
Also, both the 32 and 64 bit ARM syscall tables had entries for a
syscall at 123456 which was the "Angel SWI system call". This value
is actually the immediate constant passed to the SWI system call
instruction and is not interpreted as the system call number in linux.
This constant can be intercepted by hardware or a simulator to, for
instance, implement ARM semihosting.
Also, that constant in combination with the SWI instruction is only
used for semihosting in 32 bit ARM mode, not in 64 bit mode or in
thumb.
Since checking for that system call number was very likely a mistake
from misinterpreting how the semihosting calls work, this change
drops those checks.
Change-Id: I9b2a902d7326791449cf0e1b98e932dcadba54f7
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/24117
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Gabe Black <gabeblack@google.com>
By using braced initializer lists and dropping the default
unimplementedFunc implementation function, the SyscallDesc tables
become a lot less crowded, and it's now very obvious which syscalls
are implemented just by quickly visually scanning the table.
This will also make it a lot easier to change the underlying type
stored in the table without having to adjust all of the instances
within them.
Jira Issue: https://gem5.atlassian.net/browse/GEM5-187
Change-Id: I7821de74812e1c02ca4550fc9c46cc2188cf1bd0
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/23189
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Gabe Black <gabeblack@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>
The logic that determines which syscall to call was built into the
implementation of faults/exceptions or even into the instruction
decoder, but that logic can depend on what OS is being used, and
sometimes even what version, for example 32bit vs. 64bit.
This change pushes that logic up into the Process objects since those
already handle a lot of the aspects of emulating the guest OS. Instead,
the ISA or fault implementations just notify the rest of the system
that a nebulous syscall has happened, and that gets propogated upward
until the process does something with it. That's very analogous to how
a system call would work on a real machine.
When a system call happens, the low level component which detects that
should call tc->syscall(&fault), where tc is the relevant thread (or
execution) context, and fault is a Fault which can ultimately be set
by the system call implementation.
The TC implementor (probably a CPU) will then have a chance to do
whatever it needs to to handle a system call. Currently only O3 does
anything special here. That implementor will end up calling the
Process's syscall() method.
Once in Process::syscall, the process object will use it's contextual
knowledge to determine what system call is being requested. It then
calls Process::doSyscall with the right syscall number, where doSyscall
centralizes the common mechanism for actually retrieving and calling
into the system call implementation.
Jira Issue: https://gem5.atlassian.net/browse/GEM5-187
Change-Id: I937ec1ef0576142c2a182ff33ca508d77ad0e7a1
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/23176
Maintainer: Gabe Black <gabeblack@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Brandon Potter <Brandon.Potter@amd.com>
Set the default release to that single value for all ISAs.
glibc has checks for the kernel version based on uname, and refuses
to start any syscall emulation programs if those checks don't pass with
error:
FATAL: kernel too old
The ideal solution to this problem is to actually implement all missing
system calls for the required kernel version and bumping the release
accordingly.
However, it is very hard to implement all missing syscalls and verify
compliance.
Previously, we have simply bumped the version manually from time to
time when major glibc versions started breaking.
This commit alleviates the problem in two ways.
Firstly, having a single kernel version for all versions means that it is
easier to bump all versions at once.
Secondly, it makes it is possible to set the release with a parameter,
which in turn can be set from the command line with:
se.py --param 'system.cpu[:].workload[:].release = "4.18.0"'
Change-Id: I9e3c31073bfe68735f7b0775c8e299aa62b98222
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/17849
Maintainer: Brandon Potter <Brandon.Potter@amd.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Tested-by: kokoro <noreply+kokoro@google.com>
The system calls had four parameters. One of the parameters
is ThreadContext and another is Process. The ThreadContext
holds the value of the current process so the Process parameter
is redundant since the system call functions already have
indirect access.
With the old API, it is possible to call into the functions with
the wrong supplied Process which could end up being a confusing
error.
This patch removes the redundancy by forcing access through the
ThreadContext field within each system call.
Change-Id: Ib43d3f65824f6d425260dfd9f67de1892b6e8b7c
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/12299
Reviewed-by: Brandon Potter <Brandon.Potter@amd.com>
Maintainer: Brandon Potter <Brandon.Potter@amd.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Fix poll so that it will use the syscall retry capability
instead of causing a blocking call.
Add the accept and wait4 system calls.
Add polling to read to remove deadlocks that occur in the
event queue that are caused by blocking system calls.
Modify the write system call to return an error number in
case of error.
Change-Id: I0b4091a2e41e4187ebf69d63e0088f988f37d5da
Reviewed-on: https://gem5-review.googlesource.com/c/12115
Reviewed-by: Anthony Gutierrez <anthony.gutierrez@amd.com>
Maintainer: Anthony Gutierrez <anthony.gutierrez@amd.com>
This patch adds all system calls present in riscv-gnu-toolchain at
commit hash 65cb174. Many of them do not have implementations in gem5, so
they are just placeholders.
[Remove the variadic macro and replace it with a function that has
default arguments because variadic macros may not be portable across
compilers]
[Remove spaces around default arguments of createSyscall for better
style]
[Switch from using a loose function to using SyscallDesc's new
constructor]
Change-Id: Iff97c689109121b39df423c72d0e79c6366e31b9
Reviewed-on: https://gem5-review.googlesource.com/5322
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Alec Roelke <ar4jc@virginia.edu>
The EIOProcess class was removed recently and it was the only other class
which derived from Process. Since every Process invocation is also a
LiveProcess invocation, it makes sense to simplify the organization by
combining the fields from LiveProcess into Process.
The class was crammed into syscall_emul.hh which has tons of forward
declarations and template definitions. To clean it up a bit, moved the
class into separate files and commented the class with doxygen style
comments. Also, provided some encapsulation by adding some accessors and
a mutator.
The syscallreturn.hh file was renamed syscall_return.hh to make it consistent
with other similarly named files in the src/sim directory.
The DPRINTF_SYSCALL macro was moved into its own header file with the
include the Base and Verbose flags as well.
--HG--
rename : src/sim/syscallreturn.hh => src/sim/syscall_return.hh
This is an add-on patch for the original series that implemented RISC-V
that improves the implementation of Linux emulation for SE mode. Basically
it cleans up linux/linux.hh by removing constants that haven't been
defined for the RISC-V Linux proxy kernel and rearranging the stat
struct so it aligns with RISC-V's implementation of it. It also adds
placeholders for system calls that have been given numbers in RISC-V
but haven't been given implementations yet. These system calls are
as follows:
- readlinkat
- sigprocmask
- ioctl
- clock_gettime
- getrusage
- getrlimit
- setrlimit
The first five patches implemented RISC-V with the base ISA and multiply,
floating point, and atomic extensions and added support for detailed
CPU models with memory timing.
[Fixed incompatibility with changes made from patch 1.]
Signed-off by: Alec Roelke
Signed-off by: Jason Lowe-Power <jason@lowepower.com>
First of five patches adding RISC-V to GEM5. This patch introduces the
base 64-bit ISA (RV64I) in src/arch/riscv for use with syscall emulation.
The multiply, floating point, and atomic memory instructions will be added
in additional patches, as well as support for more detailed CPU models.
The loader is also modified to be able to parse RISC-V ELF files, and a
"Hello world\!" example for RISC-V is added to test-progs.
Patch 2 will implement the multiply extension, RV64M; patch 3 will implement
the floating point (single- and double-precision) extensions, RV64FD;
patch 4 will implement the atomic memory instructions, RV64A, and patch 5
will add support for timing, minor, and detailed CPU models that is missing
from the first four patches (such as handling locked memory).
[Removed several unused parameters and imports from RiscvInterrupts.py,
RiscvISA.py, and RiscvSystem.py.]
[Fixed copyright information in RISC-V files copied from elsewhere that had
ARM licenses attached.]
[Reorganized instruction definitions in decoder.isa so that they are sorted
by opcode in preparation for the addition of ISA extensions M, A, F, D.]
[Fixed formatting of several files, removed some variables and
instructions that were missed when moving them to other patches, fixed
RISC-V Foundation copyright attribution, and fixed history of files
copied from other architectures using hg copy.]
[Fixed indentation of switch cases in isa.cc.]
[Reorganized syscall descriptions in linux/process.cc to remove large
number of repeated unimplemented system calls and added implmementations
to functions that have received them since it process.cc was first
created.]
[Fixed spacing for some copyright attributions.]
[Replaced the rest of the file copies using hg copy.]
[Fixed style check errors and corrected unaligned memory accesses.]
[Fix some minor formatting mistakes.]
Signed-off by: Alec Roelke
Signed-off by: Jason Lowe-Power <jason@lowepower.com>
