Typically, a memory controller is assigned an address range of the
form [start, end). This address range might be interleaved and
therefore only a non-continuous subset of the addresses in the address
range is handed by this controller.
Prior to this patch, the DRAM controller was unaware of the
interleaving and as a result the address range could affect the
mapping of addresses to DRAM ranks, rows and columns. This patch
changes the DRAM controller, to transform the input address to a
continuous range of the form [0, size). As a result the DRAM
controller always operates on a dense and continuous address range
regardlesss of the system configuration.
Change-Id: I7d273a630928421d1854658c9bb0ab34e9360851
Signed-off-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/19328
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Reviewed-by: Wendy Elsasser <wendy.elsasser@arm.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
Tested-by: kokoro <noreply+kokoro@google.com>
This patch is pulling the on-chip memory outside of the on_chip_devices
list.
The external interface will be more or less the same: configuration
scripts will still use the attachOnChipIO method; a new kw argument has
been added in order to store mem_ports.
We want to provide to on-chip memory the same mechanism used when
collecting on-chip dma ports. This is needed when using Ruby, since
we need to pass a non None mem_ports to prevent the bootmem to be
wired to the bus.
Change-Id: Ifc519c3072dc5de1530772c70c80dc2094e2c54c
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/22000
Reviewed-by: Bobby R. Bruce <bbruce@ucdavis.edu>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Add support in Ruby to use all replacement policies in Classic.
Furthermore, if new replacement policies are added to the
Classic system, the Ruby system will recognize new policies
without any other changes in Ruby system. The following list
all the major changes:
* Make Ruby cache entries (AbstractCacheEntry) inherit from
Classic cache entries (ReplaceableEntry). By doing this,
replacement policies can use cache entries from Ruby caches.
AccessPermission and print function are moved from
AbstractEntry to AbstractCacheEntry, so AbstractEntry is no
longer needed.
* DirectoryMemory and all SLICC files are changed to use
AbstractCacheEntry as their cache entry interface. So do the
python files in mem/slicc/ast which check the entry
interface.
* "main='false'" argument is added to the protocol files where
the DirectoryEntry is defined. This change helps
differentiate DirectoryEntry from CacheEntry because they are
both the instances of AbstractCacheEntry now.
* Use BaseReplacementPolicy in Ruby caches instead of
AbstractReplacementPolicy so that Ruby caches will recognize
the replacement policies from Classic.
* Add getLastAccess() and useOccupancy() function to Classic
system so that Ruby caches can use them. Move lastTouchTick
to ReplacementData struct because it's needed by
getLastAccess() to return the correct value.
* Add a 2-dimensional array of ReplacementData in Ruby caches
to store information for different replacement policies. Note
that, unlike Classic caches, where policy information is
stored in cache entries, the policy information needs to be
stored in a new 2-dimensional array. This is due to Ruby
caches deleting the cache entry every time the corresponding
cache line get evicted.
Change-Id: Idff6fdd2102a552c103e9d5f31f779aae052943f
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20879
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Reviewed-by: Matt Sinclair <mattdsinclair@gmail.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
Tested-by: kokoro <noreply+kokoro@google.com>
(1) Two new options are added to fs_bigLITTLE.py:
- "root": disk/partition containing the rootfs (def. "/dev/vda1")
- "machine-type": hardware platform class (def. "VExpress_GEM5_V1")
+ Accepts platform classes from PlatformConfig
(2) Default kernel is not available in public uploads, force the user
to provide its own kernel instead of crashing.
Change-Id: I88283ae12cd7289e15b9277ea2cc382e9136f11c
Reviewed-by: Ciro Santilli <ciro.santilli@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20148
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Add this check because Gicv3 does not have the cpu_addr attribute.
Test: Change VExpress_GEM5_V1() to VExpress_GEM5_V2() and run the
following command to boot Debian.
M5_PATH=$PWD/fs_files ./build/ARM/gem5.opt ./configs/example/arm/fs_bigLITTLE.py \
--dtb $PWD/fs_files/binaries/armv8_gem5_v2_1cpu.dtb \
--kernel $PWD/fs_files/binaries/vmlinux \
--disk $PWD/fs_files/disks/disk.img \
--cpu-type atomic --big-cpus 1 --little-cpus 0
Change-Id: I23595ae5238dc7cc915ab09300f91aa5e8c24fdc
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/19648
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Adding an option to enable DRAM low-power states. The low power
states can have a significant impact on application performance
(sim_ticks) on the order of 2-3x, especially for compute-gpu apps.
The options allows for it to easily be enabled/disabled to compare
performance numbers. The option is disabled by default.
Change-Id: Ib9bddbb792a1a6a4afb5339003472ff8f00a5859
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/18548
Reviewed-by: Wendy Elsasser <wendy.elsasser@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
Tested-by: kokoro <noreply+kokoro@google.com>
This patch updates the FileSystemConfig so it works with more kinds of
config scripts (e.g., the Learning gem5 scripts).
There are 4 main changes:
- Added system as a parameter to the config_filesystem function so the
function can search the system for the number of CPUs instead of relying
on options from Options.py
- Instead of calling redirect_paths everywhere config_filesystem is
used, now it is implicitly called.
- Cleaned up the Ruby scripts a bit to remove redundant calls to
config_filesystem
- Added a config_filesystem call to the Ruby Learning gem5 script
(currently the only Learning gem5 script that requires it).
In the future, I think it would be better to move the config_filesystem
call into simulate.py, probably into the instantiate function. I tried to
use the per-CPU configuration parameters instead of options from
Options.py, but that's not possible until after the SimObject params
have been finalized in instantiate.
Change-Id: Ie6501a7435cfb3ac9d2b45be3722388b34063b1e
Signed-off-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/18848
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Tested-by: kokoro <noreply+kokoro@google.com>
Removed the icache/dcache hit latency parameters from the Sequencer.
They were replaced by the mandatory queue enqueue latency that is now
defined by the top-level cache controller. By default, the latency is
defined by the mandatory_queue_latency parameter. When the latency
depends on specific protocol states or on the request type, the protocol
may override the mandatoryQueueLatency function.
Change-Id: I72e57a7ea49501ef81dc7f591bef14134274647c
Signed-off-by: Tiago Muck <tiago.muck@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/18413
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
L1 controller selects the L2 to message based on the assigned address
ranges instead of explicitly interleaving bits in the L1 controller. This
simplifies the L1 controller implementation a bit and allows for more
flexibility when changing the address->controller mapping.
Change-Id: Ie67999bb977566939432a5045f65dbd2da81816a
Signed-off-by: Tiago Muck <tiago.muck@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/18410
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
This change introduces the concept of a faux-filesystem.
The faux-filesystem creates a directory structure in m5out
(or whatever output dir the user specifies) where system calls
may be redirected.
This is useful to avoid non-determinism when reading files
with varying path names (e.g., variations from run-to-run if
the simulation is scheduled on a cluster where paths may change).
Also, this changeset allows circumventing host pseudofiles which
have information specific to the host processor (such as cache
hierarchy or processor information). Bypassing host pseudofiles
can be useful when executing runtimes in the absence of an
operating system kernel since runtimes may try to query standard
files (i.e. /proc or /sys) which are not relevant to an
application executing in syscall emulation mode.
Change-Id: I90821b3b403168b904a662fa98b85def1628621c
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/12119
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Use SimpleMemory instead of DDR3 so we can use the timing results in
tests. By using SimpleMemory, even if the DRAM timing changes the timing
of this test won't change. I expect the timing of SimpleMemory to never
change.
Change-Id: I4c75981d7b8bfc4dcca59e628e89f5a6ea4c0e36
Signed-off-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/17871
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-by: Anthony Gutierrez <anthony.gutierrez@amd.com>
garnet_synth_traffic.py imports common.Options on line 40, so exec'ing
the Options.py file again seems redundant.
It also runs Options.py as a script rather than a module, which throws
ValueError: Attempted relative import in non-package due to the recent
change to python3 imports.
Change-Id: Id729a8dfa776af0d14312e765168aff6900eb727
Signed-off-by: Ryan Gambord <gambordr@oregonstate.edu>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/17888
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Kernel was being set using a placeholder and then assigned the
correct value. This would generate the following error if the
placeholder file did not exist:
'IOError: Can't find file <placeholder> on path'
This patch follows the same directions of commit
12eca7ac04 and removes the default
values, forcing the user to properly configure the kernel.
Change-Id: I0eb45d12eda6b6efe9a3fe118996b640844a7b34
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/11850
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
