This patch is aligning the readlink and access syscalls to the open one,
which is not overloading the openFunc, but it is factoring the
implementation into a openImpl, which is used by both open and openat.
This is needed if passing them to std::function, whose constructor is
not able to handle overloaded functions.
Change-Id: I50a8aacdfd675181b6fe9a2696220ee29cc5bc4b
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/23260
Reviewed-by: Brandon Potter <Brandon.Potter@amd.com>
Maintainer: Brandon Potter <Brandon.Potter@amd.com>
Tested-by: kokoro <noreply+kokoro@google.com>
This converts the syscall implementations to either use the
OS::byteOrder constant or, if that's not available, the system's
getGuestByteOrder() accessor, to determine the byte order, instead of
relying on TheISA to provide the correct accessor.
Change-Id: Idf7b02ee8d73990224ceac9a5efaec91a5ebf79f
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/22364
Reviewed-by: Brandon Potter <Brandon.Potter@amd.com>
Maintainer: Gabe Black <gabeblack@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>
The system calls had four parameters. One of the parameters
is ThreadContext and another is Process. The ThreadContext
holds the value of the current process so the Process parameter
is redundant since the system call functions already have
indirect access.
With the old API, it is possible to call into the functions with
the wrong supplied Process which could end up being a confusing
error.
This patch removes the redundancy by forcing access through the
ThreadContext field within each system call.
Change-Id: Ib43d3f65824f6d425260dfd9f67de1892b6e8b7c
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/12299
Reviewed-by: Brandon Potter <Brandon.Potter@amd.com>
Maintainer: Brandon Potter <Brandon.Potter@amd.com>
Tested-by: kokoro <noreply+kokoro@google.com>
This change introduces the concept of a faux-filesystem.
The faux-filesystem creates a directory structure in m5out
(or whatever output dir the user specifies) where system calls
may be redirected.
This is useful to avoid non-determinism when reading files
with varying path names (e.g., variations from run-to-run if
the simulation is scheduled on a cluster where paths may change).
Also, this changeset allows circumventing host pseudofiles which
have information specific to the host processor (such as cache
hierarchy or processor information). Bypassing host pseudofiles
can be useful when executing runtimes in the absence of an
operating system kernel since runtimes may try to query standard
files (i.e. /proc or /sys) which are not relevant to an
application executing in syscall emulation mode.
Change-Id: I90821b3b403168b904a662fa98b85def1628621c
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/12119
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
Tested-by: kokoro <noreply+kokoro@google.com>
When a thread calls exit_group, in addition to halting the thread
itself, it needs to halt all other threads in its group (i.e., threads
sharing the same thread group ID). This patch enables threads to do
that.
Change-Id: Ib2e158fb27cf98843f177a64a2d643b1bbc94d03
Reviewed-on: https://gem5-review.googlesource.com/c/9623
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
Fix poll so that it will use the syscall retry capability
instead of causing a blocking call.
Add the accept and wait4 system calls.
Add polling to read to remove deadlocks that occur in the
event queue that are caused by blocking system calls.
Modify the write system call to return an error number in
case of error.
Change-Id: I0b4091a2e41e4187ebf69d63e0088f988f37d5da
Reviewed-on: https://gem5-review.googlesource.com/c/12115
Reviewed-by: Anthony Gutierrez <anthony.gutierrez@amd.com>
Maintainer: Anthony Gutierrez <anthony.gutierrez@amd.com>
Change a66d12c guards the selection of getdents()
in x86's process.cc file with SYS_getdents, however
process.cc does not include the right header for
SYS_getdents, which leads to x86 choosing the
unimplemented call. This change adds sys/syscall.h to
address the problem.
This change also adds sys/syscall.hh to syscall_emu.cc,
which only includes syscall.hh and may not be supported on
all systems.
Change-Id: If1adcf41e9e455de5f2827ba98c542fdcacdc22e
Reviewed-on: https://gem5-review.googlesource.com/c/14775
Reviewed-by: Ciro Santilli <ciro.santilli@arm.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Brandon Potter <Brandon.Potter@amd.com>
The implementation of the getdents syscall relies on SYS_getdents, which
is not available on all archs, because the getdents syscall has been
superseded by getdents64, and does not exist on newer archs such as
aarch64.
This leads the build to break on aarch64 hosts with error:
error: 'SYS_getdents' was not declared in this scope
Change-Id: I8701fb5b61c0418b14a9463ef135a391a7f7a9ba
Reviewed-on: https://gem5-review.googlesource.com/c/14596
Reviewed-by: Brandon Potter <Brandon.Potter@amd.com>
Maintainer: Brandon Potter <Brandon.Potter@amd.com>
Do not allow the exit() syscall to terminate gem5 when running in dist-gem5
mode. The exit must be coordinated by the distributed interface instead.
Change-Id: I57f47610b59fe9e18ba3a1667fb5e45cecac1a81
Reviewed-on: https://gem5-review.googlesource.com/10461
Maintainer: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Mohammad Alian <m.alian1369@gmail.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
The changeset does a major refactor on the exit, exit_group, and
futex system calls regarding exit functionality.
A FutexMap class and related structures are added into a new
file. This increases code clarity by encapsulating the futex
operations and the futex state into an object.
Several exit conditions were added to allow the simulator to end
processes under certain conditions. Also, the simulation only
exits now when all processes have finished executing.
Change-Id: I1ee244caa9b5586fe7375e5b9b50fd3959b9655e
Reviewed-on: https://gem5-review.googlesource.com/2269
Maintainer: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
This changeset extends the pipe system call to work with
architectures other than Alpha (and enables the syscall for
x86). For the dup system call, it sets the clone-on-exec
flag by default. For the dup2 system call, the changeset
adds an implementation (and enables it for x86).
Change-Id: I00ddb416744ee7dd61a5cd02c4c3d97f30543878
Reviewed-on: https://gem5-review.googlesource.com/2266
Maintainer: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Tony Gutierrez <anthony.gutierrez@amd.com>
Reviewed-by: Michael LeBeane <Michael.Lebeane@amd.com>
This changeset adds refactors the existing open system call,
adds the openat variant (enabled for x86 builds), and adds
additional "special file" test cases for /proc/meminfo and
/etc/passwd.
Change-Id: I6f429db65bbf2a28ffa3fd12df518c2d0de49663
Reviewed-on: https://gem5-review.googlesource.com/2265
Maintainer: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Tony Gutierrez <anthony.gutierrez@amd.com>
Reviewed-by: Michael LeBeane <Michael.Lebeane@amd.com>
The Process class is full of implementation details and
structures related to SE Mode. This changeset factors out an
internal class from Process and moves it into a separate file.
The purpose behind doing this is to clean up the code and make
it a bit more modular.
Change-Id: Ic6941a1657751e8d51d5b6b1dcc04f1195884280
Reviewed-on: https://gem5-review.googlesource.com/2263
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Modifies the clone system call and adds execve system call. Requires allowing
processes to steal thread contexts from other processes in the same system
object and the ability to detach pieces of process state (such as MemState)
to allow dynamic sharing.
This changeset adds the ability to set a close-on-exec flag for a given
file descriptor. It also reworks some of the logic surrounding setting and
retrieving flags from the file description.
Several large changes happen in this patch.
The FDEntry class is rewritten so that file descriptors now correspond to
types: 'File' which is normal file-backed file with the file open on the
host machine, 'Pipe' which is a pipe that has been opened on the host machine,
and 'Device' which does not have an open file on the host yet acts as a pseudo
device with which to issue ioctls. Other types which might be added in the
future are directory entries and sockets (off the top of my head).
The FDArray class was create to hold most of the file descriptor handling
that was stuffed into the Process class. It uses shared pointers and
the std::array type to hold the FDEntries mentioned above.
The changes to these two classes needed to be propagated out to the rest
of the code so there were quite a few changes for that. Also, comments were
added where I thought they were needed to help others and extend our
DOxygen coverage.
The EIOProcess class was removed recently and it was the only other class
which derived from Process. Since every Process invocation is also a
LiveProcess invocation, it makes sense to simplify the organization by
combining the fields from LiveProcess into Process.
Used cppclean to help identify useless includes and removed them. This
involved erroneously included headers, but also cases where forward
declarations could have been used rather than a full include.
The class was crammed into syscall_emul.hh which has tons of forward
declarations and template definitions. To clean it up a bit, moved the
class into separate files and commented the class with doxygen style
comments. Also, provided some encapsulation by adding some accessors and
a mutator.
The syscallreturn.hh file was renamed syscall_return.hh to make it consistent
with other similarly named files in the src/sim directory.
The DPRINTF_SYSCALL macro was moved into its own header file with the
include the Base and Verbose flags as well.
--HG--
rename : src/sim/syscallreturn.hh => src/sim/syscall_return.hh
Read() should not write anything when returning 0 (EOF).
This patch does not correct the same bug occuring for :
nbr_read=read(file, buf, nbytes)
When nbr_read<nbytes, nbytes bytes are copied into the virtual
RAM instead of nbr_read. If buf is smaller than nbytes, a
page fault occurs, even if buf is in fact bigger than nbr_read.
Signed-off-by: Jason Lowe-Power <jason@lowepower.com>
For O3, which has a stat that counts reg reads, there is an additional
reg read per mmap() call since there's an arg we no longer ignore.
Otherwise, stats should not be affected.
Breaks the debug output from system calls into two levels: Base and Verbose.
A macro is added specifically for system calls which allows developers to
easily add new debug messages in a consistent manner. The macro also contains
a field to print thread IDs along with the CPU ID.
The recent changeset to readlink() to handle reading the /proc/self/exe link
introduces a number of problems. This patch fixes two:
1) Because readlink() called on /proc/self/exe now uses LiveProcess::progName()
to find the binary path, it will only get the zeroth parameter of the simulated
system command line. However, if a config script also specifies the process'
executable, the executable parameter is used to create the LiveProcess rather
than the zeroth command line parameter. Thus, the zeroth command line parameter
is not necessarily the correct path to the binary executing in the simulated
system. To fix this, add a LiveProcess data member, 'executable', which is
correctly set during instantiation and returned from progName().
2) If a config script allows a user to pass a relative path as the zeroth
simulated system command line parameter or process executable, readlink() will
incorrecly return a relative path when called on '/proc/self/exe'.
/proc/self/exe is always set to a full path, so running benchmarks can fail if
a relative path is returned. To fix this, clean up the handling of
LiveProcess::progName() within readlink() to get the full binary path.
NOTE: This patch still leaves the potential problem that host full path to the
binary bleeds into the simulated system, potentially causing the appearance of
non-deterministic simulated system execution.
The Process class methods were using an improper style and this subsequently
bled into the system call code. The following regular expressions should be
helpful if someone transitions private system call patches on top of these
changesets:
s/alloc_fd/allocFD/
s/sim_fd(/simFD(/
s/sim_fd_obj/getFDEntry/
s/fix_file_offsets/fixFileOffsets/
s/find_file_offsets/findFileOffsets/
The patch clarifies whether file descriptors are host file descriptors or
target file descriptors in the system call code. (Host file descriptors
are file descriptors which have been allocated through real system calls
where target file descriptors are allocated from an array in the Process
class.)
This patch extends the previous patch's alterations around fd_map. It cleans
up some of the uglier code in the process file and replaces it with a more
concise C++11 version. As part of the changes, the FdMap class is pulled out
of the Process class and receives its own file.
