This unused pair of methods could be used to trigger a breakpoint within
the remote GDB stub, but was unused and would need to be called from an
instance of GDB attached to gem5 itself.
The system's version of breakpoint was also limitted in that it would
only cause a breakpoint in the first thread's GDB and no other.
Change-Id: I53ceab78667610177dbb8be1def3a88262befeec
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/44031
Reviewed-by: Boris Shingarov <shingarov@gmail.com>
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Maintainer: Gabe Black <gabe.black@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
The systemc dir was not included in this fix.
First it was identified that there were only occurrences
at 0, 1, and 2 levels of indentation (and 2 of 2 spaces,
1 of 3 spaces and 2 of 12 spaces), using:
grep -nrE --exclude-dir=systemc \
"^ *enum [A-Za-z].* {$" src/
Then the following commands were run to replace:
<indent level>enum X ... {
by:
<indent level>enum X ...
<indent level>{
Level 0:
grep -nrl --exclude-dir=systemc \
"^enum [A-Za-z].* {$" src/ | \
xargs sed -Ei \
's/^enum ([A-Za-z].*) \{$/enum \1\n\{/g'
Level 1:
grep -nrl --exclude-dir=systemc \
"^ enum [A-Za-z].* {$" src/ | \
xargs sed -Ei \
's/^ enum ([A-Za-z].*) \{$/ enum \1\n \{/g'
and so on.
Change-Id: Ib186cf379049098ceaec20dfe4d1edcedd5f940d
Signed-off-by: Daniel R. Carvalho <odanrc@yahoo.com.br>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/43326
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Gabe Black <gabe.black@gmail.com>
Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>
The systemc dir was not included in this fix.
First it was identified that there were only occurrences
at 0, 1, 2 and 3 levels of indentation (and a single
occurrence of 2 and 3 spaces), using:
grep -nrE --exclude-dir=systemc \
"^ *struct [A-Za-z].* {$" src/
Then the following commands were run to replace:
<indent level>struct X ... {
by:
<indent level>struct X ...
<indent level>{
Level 0:
grep -nrl --exclude-dir=systemc
"^struct [A-Za-z].* {$" src/ | \
xargs sed -Ei \
's/^struct ([A-Za-z].*) \{$/struct \1\n\{/g'
Level 1:
grep -nrl --exclude-dir=systemc \
"^ struct [A-Za-z].* {$" src/ | \
xargs sed -Ei \
's/^ struct ([A-Za-z].*) \{$/ struct \1\n \{/g'
and so on.
Change-Id: I362ef58c86912dabdd272c7debb8d25d587cd455
Signed-off-by: Daniel R. Carvalho <odanrc@yahoo.com.br>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/39017
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>
The systemc dir was not included in this fix.
First it was identified that there were only occurrences
at 0, 1, and 2 levels of indentation, using:
grep -nrE --exclude-dir=systemc \
"^ *class [A-Za-z].* {$" src/
Then the following commands were run to replace:
<indent level>class X ... {
by:
<indent level>class X ...
<indent level>{
Level 0:
grep -nrl --exclude-dir=systemc
"^class [A-Za-z].* {$" src/ | \
xargs sed -Ei \
's/^class ([A-Za-z].*) \{$/class \1\n\{/g'
Level 1:
grep -nrl --exclude-dir=systemc \
"^ class [A-Za-z].* {$" src/ | \
xargs sed -Ei \
's/^ class ([A-Za-z].*) \{$/ class \1\n \{/g'
and so on.
Change-Id: I17615ce16a333d69867b27c7bae0f4fdafd8b2eb
Signed-off-by: Daniel R. Carvalho <odanrc@yahoo.com.br>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/39015
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>
The only difference between the NormalLogger and Logger is
a simple implementation for log(), which is then called by
the other loggers. Since this is common to everybody, move
this implementation to Logger and remove NormalLogger.
This makes it possible to test the NormalLoggers using the
current gtest logging framework.
Change-Id: I6805fa14f58ddc7d37b00fcd7fcacb32e0b5d456
Signed-off-by: Daniel R. Carvalho <odanrc@yahoo.com.br>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/41395
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Maintainer: Bobby R. Bruce <bbruce@ucdavis.edu>
In some cases, we want to move and copy the symbol table to another
address. However, the name of symbol table should be unique. This rename
helper provides a way to modify the name of symbol. Developers can use
it to solve the conflict with this helper.
Change-Id: I4627e06da3a03da57009d613188be117c75750a0
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/43105
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Maintainer: Bobby R. Bruce <bbruce@ucdavis.edu>
Tested-by: kokoro <noreply+kokoro@google.com>
Since gtest's SUCCEED() just throws away output sent to it, there needs
to be an alternative way to capture non-fatal warn, hack, or inform
messages. This change adds a stringstream called gtestLogOutput which
will accumulate all log messages so they can be inspected later. If you
want to see what output occurs as a result of a specific action, you can
flush out the stringstream with .str(""), perform that action, and then
check the stream's contents.
The stream also records the output of exiting logs like fatal and panic.
It's not 100% clear that these messages would be retrievable or useful,
but this at least maintains consistency between the two classes of
messages.
To avoid threading/locking issues, the stream is thread local. To
prevent tests from affecting each other and to make the output more
predictable for test assertions, it also automatically installs an event
hook which will be called each time a test starts which will clear out
the contents of the stream.
Change-Id: I9d6650feb77b676a5b2b1fc2542cdebf3c60ed34
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/42181
Reviewed-by: Gabe Black <gabe.black@gmail.com>
Maintainer: Gabe Black <gabe.black@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
This function causes problems with gcc 5 which incorrectly complains
about the call to warn_if inside a constexpr function. That should only
be an error if a call to a non-constexpr is unavoidable, and even then
the compiler isn't required to emit a diagnostic.
Rather than drop the warning, or add ifdefs to deal with these defective
versions of gcc, this change eliminates the power() function entirely.
Most inputs to this function would overflow anyway, which is reportedly
why no integer version of an exponentiation function is defined in the
standard library, and all uses of this function can easily and more
efficiently be replaced by simple left and right shifts.
Finally, by eliminating the power() function, we also remove the
dependence on base/logging.hh.
Change-Id: I4d014163883d12db46da4ee752696c8225534ee8
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/42504
Reviewed-by: Gabe Black <gabe.black@gmail.com>
Maintainer: Gabe Black <gabe.black@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
The existing sext function is a bit of a misnomer since it doesn't
actually sign extend its input, it just extends the sign if the sign bit
was zero.
This change adds a new szext function which truly sign extends the
value, although with a tiny amount of additional overhead.
Change-Id: I562ce479b771be8a3319934aeff55e797126a146
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/42384
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Maintainer: Gabe Black <gabe.black@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
This function is not used anywhere.
In addition, gethostname uses a fixed host name, and
sethostname is not implemented (sim/syscall_emul). If
we were to handle sethostname too it would require a
special conjoint implementation anyway.
Change-Id: I20919a49b123a6a49582d9cfacf1fd167cb44776
Signed-off-by: Daniel R. Carvalho <odanrc@yahoo.com.br>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/41394
Reviewed-by: Bobby R. Bruce <bbruce@ucdavis.edu>
Maintainer: Bobby R. Bruce <bbruce@ucdavis.edu>
Tested-by: kokoro <noreply+kokoro@google.com>
Previously converting scientific numbers to non-floating
numbers would yield incorrect results, because the
underlying conversion was using stoll and stoull, which
do not deal with scientific numbers properly. Therefore,
converting to_number("8.234e+08", val) would yield
val=8, which is blatantly wrong (expected 823400000).
This was fixed by searching for "e" within the string to
be converted.
To make sure all double and scientific number conversions
are correct, a few extra tests were added.
Change-Id: I6a9599d8473909d274326b6f8c268e3603044ab4
Signed-off-by: Daniel R. Carvalho <odanrc@yahoo.com.br>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/38775
Reviewed-by: Bobby R. Bruce <bbruce@ucdavis.edu>
Maintainer: Bobby R. Bruce <bbruce@ucdavis.edu>
Tested-by: kokoro <noreply+kokoro@google.com>
The operators it seems to need are ones which modify the BitUnion being
operated on, vs ones which just use it to produce a new value. The later
kind can be handled by converting the BitUnion into its underlying type
and then applying the built in operators.
Change-Id: I8aa08bf74d8ad88f4dfbb0031610c52ad412d03b
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/41515
Reviewed-by: Gabe Black <gabe.black@gmail.com>
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Maintainer: Gabe Black <gabe.black@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
This commit adds an option to add SI and its derived units to stats.
Units are now the third parameter of every Stat class constructor.
The following are convenient macros that could be used to add units
to stats,
* UNIT_CYCLE: represents clock cycles.
* UNIT_TICK: represents the count of gem5's Tick.
* UNIT_SECOND: represents the base unit of time defined by SI.
* UNIT_BIT: represents the number of computer bits.
* UNIT_BYTE: represents 8 bits.
* UNIT_VOLT: a SI derived unit measuring potential difference.
* UNIT_JOULE: represents joule, a unit of energy, as defined by SI.
* UNIT_WATT: represents 1 watt, where 1 watt = 1 joule / second.
* UNIT_CELSIUS: represents 1 Celsius degree as defined by SI.
* UNIT_RATE(T1, T2): represents the unit of a quantity of T1 divided
by a quantity of T2.
* UNIT_RATIO: represents the unit of a quantity of unit T divided by
a quantity of unit T.
* UNIT_UNSPECIFIED: the unit of the stat is unspecified. This type of
unit is mainly for backward compatibility. Newly
introduced stats should have the units specified.
This commit also alters the behavior of the ADD_STAT macro.
Specifically, ADD_STAT syntax is unchanged, but the unit of the stat
is hardcoded to be UNIT_UNSPECIFIED.
JIRA link: https://gem5.atlassian.net/browse/GEM5-849
This change is an effort towards supporting new stats schema:
https://github.com/gem5/stats-schema
Change-Id: I791704a6c4d9e06332797dbfc5eb611cb43f4710
Signed-off-by: Hoa Nguyen <hoanguyen@ucdavis.edu>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/38855
Tested-by: kokoro <noreply+kokoro@google.com>
Maintainer: Bobby R. Bruce <bbruce@ucdavis.edu>
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
This test expects to load a symbol file using the load method of gem5's
SymbolTable class, and then to search through it for a given symbol or
address.
Unfortunately, the type of file it expects to load has a format where
each line is of the form:
0x00000000, symbol_name
where the numerical part is the address of the symbol, and the part
after the comma is the symbol name. I have not been able to find any
tool which outputs a symbol file in this format, or any tool for
inspecting an existing object file which will output symbols in this
format. I looked at objdump, objcopy, nm, and the map file format output
by gnu's linker. nm has 3 different output formats, none of which match.
Usually when working with ELF files, one would just generate a new ELF
file which only had debugging information like the symbol table, and
then strip the symbols out of the original.
Since this file format seems to have been invented from thin air, there
isn't really a good way to generate a canonical file to test the loading
code against, nor is being able to load this obscure format likely to be
useful to anybody. If someone *did* want to load an external symbol
table, they would use the ELF loader and not this.
This CL deletes both this test, and the loading code in SymbolTable.
Change-Id: I20402e3f35e54d1e186a92d9c83d1c06ec86bf7d
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/40620
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Maintainer: Bobby R. Bruce <bbruce@ucdavis.edu>
Tested-by: kokoro <noreply+kokoro@google.com>
