rocBLAS builds for all targets by default, but it requires we set the
HCC_AMDGPU_TARGET env variable to all the targets we want to build for.
This change explicitly sets all the gfx versions we intend to support in
gem5, and removes the extraneous "-a all" from the install command.
Additionally, doing this allowed for DNNMark to run on gfx902.
Change-Id: Id1a00433beaa23f6935c12073d5bddc38431886b
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/54623
Reviewed-by: Matt Sinclair <mattdsinclair@gmail.com>
Maintainer: Matt Sinclair <mattdsinclair@gmail.com>
Reviewed-by: Matthew Poremba <matthew.poremba@amd.com>
Tested-by: kokoro <noreply+kokoro@google.com>
This test includes,
- A dockerfile creating a Docker image containing SST-Core
and SST-Elements installed. The image also contains the
bbl-busybox-boot-exit binary from gem5-resources.
- A nightly test involving compiling gem5 as a library, and
booting a linux kernel without a disk image using SST where
gem5 TimingSimpleCPU is the CPU core.
Change-Id: I2bf90b4121ed0d38300451648f2e358a7c3fffe2
Signed-off-by: Hoa Nguyen <hoanguyen@ucdavis.edu>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/52564
Reviewed-by: Bobby Bruce <bbruce@ucdavis.edu>
Maintainer: Bobby Bruce <bbruce@ucdavis.edu>
Tested-by: kokoro <noreply+kokoro@google.com>
In the gcn-gpu image, rocBLAS wasn't able to be installed. This was
due to us not installing rocm-cmake, as rocBLAS is dependent on it
and will download the most recent version of rocm-cmake if it
isn't installed. The most recent version of rocm-cmake wasn't
compatible with the version of ROCm we're using.
This patch installs rocm-cmake before building and installing
rocBLAS instead of after.
Change-Id: Iaaa34d5e0d6594fddd0d1a7d147f43405163ca89
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/50847
Reviewed-by: Matt Sinclair <mattdsinclair@gmail.com>
Reviewed-by: Bobby R. Bruce <bbruce@ucdavis.edu>
Maintainer: Matt Sinclair <mattdsinclair@gmail.com>
Maintainer: Bobby R. Bruce <bbruce@ucdavis.edu>
Tested-by: kokoro <noreply+kokoro@google.com>
This can be built to create an image that uses the GCC-11 compiler. At
present GCC-11 cannot be installed using APT by default. This
Dockerfile uses a special APT repository to do this and is therefore a
separate Dockerfile to the other GCC version targets.
Change-Id: Iafee92415d9047eedf3586c78722f973010f6050
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/50748
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Previously, we were using ROCm 1.6.2 as there were issues with some of
the machine learning applications that weren't present on 1.6.2.
However, after re-running them we've found that they, and all other
applications previously tested, run to completion.
Additionally, there have been patches to enable BLIT kernels which made
it so we no longer need to build HIP and MIOpen differently for APU and
DGPU code. This allows us to install HIP directly from the .deb packages
instead of from source. Installing from the .deb packages also avoid the
hipDeviceSynchronize() bug. Finally, this makes it so most GPU programs
can be run as-is without modifications to remove hipMalloc/hipMemcpy
calls as was done previously.
Change-Id: Ic61b09ed200b19f759d891487cde874abd607537
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/37675
Reviewed-by: Bobby R. Bruce <bbruce@ucdavis.edu>
Maintainer: Bobby R. Bruce <bbruce@ucdavis.edu>
Tested-by: kokoro <noreply+kokoro@google.com>
The Python version installed in the Dockerfile for GCN3 by apt-get is
too old to build gem5. This bumps the version to the most recent Python
to avoid needing to update this file too much.
Python 3.9 is install via PPA since it is not available in the official
Ubuntu 16.04 repository. Likewise, pip is installed from "source" as it
is not available for Python 3.9 in from neither the PPA nor Ubuntu.
Change-Id: Ia919f31cf9c9063e1df091cea15590526715739b
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/37219
Reviewed-by: Matt Sinclair <mattdsinclair@gmail.com>
Reviewed-by: Daniel Gerzhoy <daniel.gerzhoy@gmail.com>
Maintainer: Matt Sinclair <mattdsinclair@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
For the next release of gem5, we are dropping support for Python2. The
Ubuntu 18.04 Docker images were running with Python2. This has been
updated.
It should be noted that there is, at present, no eligant solution to the
issue that older versions of Scons (such as that obtainable via APT in
Ubuntu 18.04) use Python2. Those wishing to compile with these Docker
Images should use
`/usr/bin/env python3 $(which scons) build/X86/gem5.op5`
Change-Id: Ic36ecc7196688daff21af2bb3a76381966f38f60
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/36595
Maintainer: Gabe Black <gabe.black@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Without this, HDF5 is not built, e.g. a run such as
http://jenkins.gem5.org/job/Nightly/68/console contains:
Checking for hdf5-serial using pkg-config... pkg-config not found
Checking for hdf5 using pkg-config... pkg-config not found
Checking for H5Fcreate("", 0, 0, 0) in C library hdf5... (cached) no
Warning: Couldn't find any HDF5 C++ libraries. Disabling
HDF5 support.
This is done to increase coverage a bit, and serve as dependency
documentation to users.
Change-Id: Ibf820a3aa76c29eeee1201646924ee181615a162
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/34777
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Ubuntu 20.04 contains GCC verisons 9 and 10, which are not easily
obtainable (at least through APT) on Ubuntu 18.04. Therefore, a
Dockerfile for obtaining GCC versions in Ubuntu 20.04 has been added.
The orignal GCC version Dockerfile (Ubuntu 18.04) has been kept as
GCC versions 4.8, 5, and 6 are not obtainable, via APT, on Ubuntu
20.04. A complete migration to the 20.04 Dockerfile is not possible
until these earlier GCC versions are dropped.
The Docker images for GCC Versions 9 and 10 can be found here:
https://gcr.io/gem5-test/gcc-version-10https://gcr.io/gem5-test/gcc-version-9
The other Dockerfile directories have been renamed for consistency.
Change-Id: I569249331095ee62d1be5be479c7ba7da0077422
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/30514
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Reviewed-by: Bobby R. Bruce <bbruce@ucdavis.edu>
Maintainer: Bobby R. Bruce <bbruce@ucdavis.edu>
Tested-by: kokoro <noreply+kokoro@google.com>
This dockerfile creates an image that installs the software stack needed
to run both machine learning and non-machine learning applications using
the GCN3 gpu model, while also applying patches to the software stack to
optimize machine learning applications, as well as APUs, which is the
current type of GPU in the GCN3 GPU model.
Change-Id: If36c2df1c00c895e27e9d741027fd10c17bf224e
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/29192
Reviewed-by: Matt Sinclair <mattdsinclair@gmail.com>
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Maintainer: Bobby R. Bruce <bbruce@ucdavis.edu>
Tested-by: kokoro <noreply+kokoro@google.com>
This was previously used to test gem5 being compiled and run in a
Python3 environment. This is redundant with the introduction of
"util/dockerfiles/ubuntu-20.04_all-dependencies", which uses python3
exclusively.
Change-Id: Ie837da338c3985ba92aff84144948a23fd6ece3f
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/28890
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
This Dockerfile creates an image which simulates an Ubuntu 20.04
environment. Unlike the Ubuntu 18.04 Dockerfile, this does not use
Python2. It uses exclusively Python3. Ubuntu 20.04 has Python3 installed
by default. The image this Dockerfile creates can be obtained from
"gcr.io/gem5-test/ubuntu-20.04_all-dependencies". To pull:
docker pull gcr.io/gem5-test/ubuntu-20.04_all-dependencies
Change-Id: I73b51028e0d6a3198aa6e7b1906d20ed6eb6c815
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/28889
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
