MEM: Make the bus bridge unidirectional and fixed address range

This patch makes the bus bridge uni-directional and specialises the
bus ports to be a master port and a slave port. This greatly
simplifies the assumptions on both sides as either port only has to
deal with requests or responses. The following patches introduce the
notion of master and slave ports, and would not be possible without
this split of responsibilities.

In making the bridge unidirectional, the address range mechanism of
the bridge is also changed. For the cases where communication is
taking place both ways, an additional bridge is needed. This causes
issues with the existing mechanism, as the busses cannot determine
when to stop iterating the address updates from the two bridges. To
avoid this issue, and also greatly simplify the specification, the
bridge now has a fixed set of address ranges, specified at creation
time.

configs/common/FSConfig.py

@@ -56,6 +56,7 @@ class MemBus(Bus):
 
 
 def makeLinuxAlphaSystem(mem_mode, mdesc = None):
+    IO_address_space_base = 0x80000000000
     class BaseTsunami(Tsunami):
         ethernet = NSGigE(pci_bus=0, pci_dev=1, pci_func=0)
         ide = IdeController(disks=[Parent.disk0, Parent.disk2],
@@ -68,10 +69,13 @@ def makeLinuxAlphaSystem(mem_mode, mdesc = None):
     self.readfile = mdesc.script()
     self.iobus = Bus(bus_id=0)
     self.membus = MemBus(bus_id=1)
-    self.bridge = Bridge(delay='50ns', nack_delay='4ns')
+    # By default the bridge responds to all addresses above the I/O
+    # base address (including the PCI config space)
+    self.bridge = Bridge(delay='50ns', nack_delay='4ns',
+                         ranges = [AddrRange(IO_address_space_base, Addr.max)])
     self.physmem = PhysicalMemory(range = AddrRange(mdesc.mem()))
-    self.bridge.side_a = self.iobus.port
-    self.bridge.side_b = self.membus.port
+    self.bridge.master = self.iobus.port
+    self.bridge.slave = self.membus.port
     self.physmem.port = self.membus.port
     self.disk0 = CowIdeDisk(driveID='master')
     self.disk2 = CowIdeDisk(driveID='master')
@@ -146,6 +150,10 @@ def makeLinuxAlphaRubySystem(mem_mode, mdesc = None):
     return self
 
 def makeSparcSystem(mem_mode, mdesc = None):
+    # Constants from iob.cc and uart8250.cc
+    iob_man_addr = 0x9800000000
+    uart_pio_size = 8
+
     class CowMmDisk(MmDisk):
         image = CowDiskImage(child=RawDiskImage(read_only=True),
                              read_only=False)
@@ -166,8 +174,8 @@ def makeSparcSystem(mem_mode, mdesc = None):
     self.t1000.attachIO(self.iobus)
     self.physmem = PhysicalMemory(range = AddrRange(Addr('1MB'), size = '64MB'), zero = True)
     self.physmem2 = PhysicalMemory(range = AddrRange(Addr('2GB'), size ='256MB'), zero = True)
-    self.bridge.side_a = self.iobus.port
-    self.bridge.side_b = self.membus.port
+    self.bridge.master = self.iobus.port
+    self.bridge.slave = self.membus.port
     self.physmem.port = self.membus.port
     self.physmem2.port = self.membus.port
     self.rom.port = self.membus.port
@@ -178,6 +186,25 @@ def makeSparcSystem(mem_mode, mdesc = None):
     self.disk0 = CowMmDisk()
     self.disk0.childImage(disk('disk.s10hw2'))
     self.disk0.pio = self.iobus.port
+
+    # The puart0 and hvuart are placed on the IO bus, so create ranges
+    # for them. The remaining IO range is rather fragmented, so poke
+    # holes for the iob and partition descriptors etc.
+    self.bridge.ranges = \
+        [
+        AddrRange(self.t1000.puart0.pio_addr,
+                  self.t1000.puart0.pio_addr + uart_pio_size - 1),
+        AddrRange(self.disk0.pio_addr,
+                  self.t1000.fake_jbi.pio_addr +
+                  self.t1000.fake_jbi.pio_size - 1),
+        AddrRange(self.t1000.fake_clk.pio_addr,
+                  iob_man_addr - 1),
+        AddrRange(self.t1000.fake_l2_1.pio_addr,
+                  self.t1000.fake_ssi.pio_addr +
+                  self.t1000.fake_ssi.pio_size - 1),
+        AddrRange(self.t1000.hvuart.pio_addr,
+                  self.t1000.hvuart.pio_addr + uart_pio_size - 1)
+        ]
     self.reset_bin = binary('reset_new.bin')
     self.hypervisor_bin = binary('q_new.bin')
     self.openboot_bin = binary('openboot_new.bin')
@@ -206,8 +233,8 @@ def makeArmSystem(mem_mode, machine_type, mdesc = None, bare_metal=False):
     self.membus = MemBus(bus_id=1)
     self.membus.badaddr_responder.warn_access = "warn"
     self.bridge = Bridge(delay='50ns', nack_delay='4ns')
-    self.bridge.side_a = self.iobus.port
-    self.bridge.side_b = self.membus.port
+    self.bridge.master = self.iobus.port
+    self.bridge.slave = self.membus.port
 
     self.mem_mode = mem_mode
 
@@ -261,7 +288,7 @@ def makeArmSystem(mem_mode, machine_type, mdesc = None, bare_metal=False):
         self.boot_osflags = boot_flags
 
     self.physmem.port = self.membus.port
-    self.realview.attachOnChipIO(self.membus)
+    self.realview.attachOnChipIO(self.membus, self.bridge)
     self.realview.attachIO(self.iobus)
     self.intrctrl = IntrControl()
     self.terminal = Terminal()
@@ -287,8 +314,8 @@ def makeLinuxMipsSystem(mem_mode, mdesc = None):
     self.membus = MemBus(bus_id=1)
     self.bridge = Bridge(delay='50ns', nack_delay='4ns')
     self.physmem = PhysicalMemory(range = AddrRange('1GB'))
-    self.bridge.side_a = self.iobus.port
-    self.bridge.side_b = self.membus.port
+    self.bridge.master = self.iobus.port
+    self.bridge.slave = self.membus.port
     self.physmem.port = self.membus.port
     self.disk0 = CowIdeDisk(driveID='master')
     self.disk2 = CowIdeDisk(driveID='master')
@@ -316,14 +343,42 @@ def x86IOAddress(port):
     return IO_address_space_base + port
 
 def connectX86ClassicSystem(x86_sys):
+    # Constants similar to x86_traits.hh
+    IO_address_space_base = 0x8000000000000000
+    pci_config_address_space_base = 0xc000000000000000
+    interrupts_address_space_base = 0xa000000000000000
+    APIC_range_size = 1 << 12;
+
     x86_sys.membus = MemBus(bus_id=1)
     x86_sys.physmem.port = x86_sys.membus.port
 
     # North Bridge
     x86_sys.iobus = Bus(bus_id=0)
     x86_sys.bridge = Bridge(delay='50ns', nack_delay='4ns')
-    x86_sys.bridge.side_a = x86_sys.iobus.port
-    x86_sys.bridge.side_b = x86_sys.membus.port
+    x86_sys.bridge.master = x86_sys.iobus.port
+    x86_sys.bridge.slave = x86_sys.membus.port
+    # Allow the bridge to pass through the IO APIC (two pages),
+    # everything in the IO address range up to the local APIC, and
+    # then the entire PCI address space and beyond
+    x86_sys.bridge.ranges = \
+        [
+        AddrRange(x86_sys.pc.south_bridge.io_apic.pio_addr,
+                  x86_sys.pc.south_bridge.io_apic.pio_addr +
+                  APIC_range_size - 1),
+        AddrRange(IO_address_space_base,
+                  interrupts_address_space_base - 1),
+        AddrRange(pci_config_address_space_base,
+                  Addr.max)
+        ]
+
+    # Create a bridge from the IO bus to the memory bus to allow access to
+    # the local APIC (two pages)
+    x86_sys.iobridge = Bridge(delay='50ns', nack_delay='4ns')
+    x86_sys.iobridge.slave = x86_sys.iobus.port
+    x86_sys.iobridge.master = x86_sys.membus.port
+    x86_sys.iobridge.ranges = [AddrRange(interrupts_address_space_base,
+                                         interrupts_address_space_base +
+                                         APIC_range_size - 1)]
 
     # connect the io bus
     x86_sys.pc.attachIO(x86_sys.iobus)